CAME-7800

facebooktwitterpinterestfacebooktwitterpinterest

Vimeo user, Gilles Havet uploaded this short video that follows some of the tennis players that were competing at the "International Women's Tournament" in Belgium. Some of the scenes in the video were shot with the CAME-7800 gimbal & CAME-Single! The cameras used were the Panasonic GH4 and Sony a6300.
The Single gimbal is designed to be operated with just one hand. The encoders on the CAME-Single: prevent the motors from losing sync/skipping steps, provides important information about the frame and also decreases the power consumption - increasing the battery life.

CAME-TV Single Gimbal

Although, the CAME-7800 gimbal is currently unavailable - we advise you to check out our new CAME-ARGO 3-axis gimbal. The CAME-ARGO features a 32 bit Alexmos Board and is completely tool-less, making balancing your camera setup easy and quick. The max payload that the ARGO can handle is about 6.6lbs , which is the same max payload as the 7800 gimbal.

CAME-TV ARGO Gimbal

For more information on the CAME-Single and the CAME-ARGO click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV Single Gimbal   CAME-TV ARGO Gimbal

 

facebooktwitterpinterestfacebooktwitterpinterest

Youtube user, Scotty Ray uploaded this wonderfully shot backpacking video that documents his hike up to Clouds Rest in the famous Yosemite National Park. He filmed the video with the CAME-TV 7800 and Sony A7s. The two lenses he used was the Rokinon 14mm and the Zeiss 24-70mm.

The CAME-7800 3-Axis Camera Gimbal from CAME-TV is a handheld stabilizer designed for camera systems such as Canon 5Dmk3, Canon 5Dmk2, Canon 7D, Panasonic GH4, and Sony A7. It utilizes three motors that stabilize the camera along the pan, tilt, and roll axes. The CAME-7800 features a clean design that hides all of the wires. As with most sled-style stabilizers, your camera needs to be properly balanced in order to get the best performance out of the gimbal.

CAME-TV 7800 Gimbal

Although, the CAME-TV 7800 gimbal is currently sold out, we urge you to check out all our other gimbals like the CAME-TV ARGO, CAME-Single and CAME-Mini 3. Click the image below to see a list of all the gimbals we offer. Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

unnamed-3

 

facebooktwitterpinterestfacebooktwitterpinterest

BBW Production, uploaded this wonderfully shot short film titled "The Day", about Winter fly fishing in Estonia. The CAME-7800 was used for all the tracking shots in the first half of the movie and also for some shots sprinkled throughout the film. He shot it with a Nikon D7100 with a 18-105mm VR Nikkor lens.

The CAME-7800 gimbal is an updated version of the old CAME-7500 3-axis gimbal. The 7800 has tool-less adjustments on the roll and yaw axis, making it easy to precisely balance your camera for optimal performance. The 7800 can support cameras like the Canon DSLR's to even Micro four-thirds cameras like the Panasonic GH4 - as long as it doesn't exceed the max payload of about 6.5 lbs.

CAME-TV 7800 3 -axis Gimbal

For more information on the CAME-7800 3-axis gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV 7800 3-Axis Gimbal

facebooktwitterpinterestfacebooktwitterpinterest

Kyle SHOX Brown FILMS, posted this promo video of the Bassline Festival that took place in Manchester. He used a Sony A7s with a Canon 35mm F2 and a Zeiss 24-70mm F4 lens - all balanced on the CAME-7800 for the video.

The CAME-7800 is a 3-axis gimbal that is able to hold setups that weigh up to 6.5 lbs, making it perfect for shooters who want to use their DSLR/Mirror-less cameras with a slightly heavier lens. Right out of the box, the CAME-7800 has multiple operating modes that give the shooter different options while shooting a scene. You can disable the follow mode on the pan/tilt, enable the follow mode on the pan/tilt or a "commixture" mode, which allows you to enable the pan but disable the tilt. All the modes can easily be cycled through by pressing the joystick down.

CAME-7800 3 Axis Camera Gimbal

For more information on the CAME-7800 3-axis gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-7800 3 Axis Camera Gimbal

facebooktwitterpinterestfacebooktwitterpinterest

You4reel, uploaded this short highlight video of the Miss Ireland 2015 competition. He filmed it with a Panasonic GH-4 balanced on the CAME-7800 gimbal.

The CAME-7800 is an upgraded version of the old CAME-7500 and comes pre-assembled. The 7800 has an updated quick release plate with tool-less adjustments on the roll and yaw axis, making it easier to balance your camera on the gimbal. Although, you4reel doesn't state what type of lens he used, the CAME-7800 is able to hold more weight than our Mini 2 gimbal. It has a max payload of about 6.5 lbs and is perfect for your Canon 5D model DSLR cameras.

CAME-7800 3 Axis Camera Gimbal

For more information on the CAME-7800 3-axis gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-7800 3 Axis Camera Gimbal

facebooktwitterpinterestfacebooktwitterpinterest

Vimeo user, llija, uploaded this quick test CAME-TV 7800 gimbal test. The whole test was shot with the Nikon D600 plus a 17-35mm F.28 lens.

With a max payload of about 6.5 lbs, the CAME-7800 is perfect for DSLR cameras like the Canon 5D series, Nikon DSLRs and even Panasonic GH-4s with a heavier lens. The CAME-7800 comes pre-calibrated with a 32-bit Alexmos control board and is tool-less on the Roll and Yaw axis, making it easier for you to balance your setup on the gimbal. There are two different version of the CAME-7800 that you can purchase - the 7800 gimbal by itself or with a case and a balancing stand.

32 Bit CAME-7800 3 Axis Camera Gimbal

For more information on the CAME-7800 3-axis gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

32 Bit CAME-7800 3 Axis Camera Gimbal

facebooktwitterpinterestfacebooktwitterpinterest

Park Life, recently uploaded this commercial for "Horizon Career" where he used the CAME-7800 gimbal to film most of the scenes!

The CAME-7800 is a great gimbal for shooters who mostly film with DSLR cameras like a Canon 5Dmk2 or a Nikon. In this video, Park Life used a Sony A7S, which is lighter than a DSLR, but the CAME-7800 can handle it perfectly. The max payload the CAME-7800 is about 6.5lbs and the gimbal offers multiple operating modes, giving the shooter more choices for his/hers scene.

Updated Assembled 32 Bit CAME-7800 3 Axis Camera Gimbal

For more information on the CAME-7800 3-axis gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

Updated Assembled 32 Bit CAME-7800 3 Axis Camera Gimbal

facebooktwitterpinterestfacebooktwitterpinterest

Check out this test film by Ryoma Yoshimura that he shot entirely with the CAME-7800 gimbal! He used a Canon 5Dmk2 and a 60D with three different lenses - a Sigma 70-200 F.2.8, 25-105mm and a 50mm.
The CAME-7800 gimbal is a great gimbal if your camera setup is a little bit on the heavier side. With a max payload of about 6.5lbs(3kg), it can hold bigger DSLR cameras like the Canon 5D series or the Nikon cameras. The CAME-7800 has tool-less adjustment for the yaw and roll axis, making it easy to balance your camera.

CAME-7800 3 Axis Camera Gimbal

For more information on the CAME-7800 3-axis gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-7800 3 Axis Camera Gimbal

facebooktwitterpinterestfacebooktwitterpinterest

, posted this quick test video a few days ago of him trying out the Samsung NX-1 camera paired with the CAME-7500 gimbal.

The CAME-7500 is the older version of what is now the CAME-7800 3-axis gimbal. The 7500 gimbal required users to build the gimbal and  required tools to balance the camera on the carriage. Now, most of the gimbals that we offer are tool-less, pre-built and some even have encoders built into the motor (CAME-Single & CAME-Action). The CAME-7800 is a good gimbal for setups that might be too heavy for the CAME-Mini 2 or the CAME-Single. We have a variety of gimbal models that can hold small action cameras(CAME-Action) or bigger setups like a Blackmagic Cinema Camera(CAME-8000).

CAME-MINI 2 Camera Gimbal For A7S GH4 BMPCC

CAME-7800 3 Axis Camera Gimbal

For more information on any of the 3-axis gimbals we offer click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Mini2

facebooktwitterpinterestfacebooktwitterpinterest

Csproductions87, uploaded this wedding he shot using his Panasonic GH4 balanced on a CAME-7500 gimbal with a Rokinon 16mm Cine Lens. The video is a quick highlight video that follows bride and groom as they prepare for the ceremony.

Although, the CAME-7500 gimbal is discontinued, we advise that you check out the updated version of the 7500 - the CAME-7800. The CAME-7800 is  based on the original CAME-7500, but it's completely upgraded and pre-assembled. The 7800 has upgraded; handles, quick release plate and is tool-less on the roll and YAW axis.

CAME-7500 Gimbal
CAME-7500 3-Axis Gimbal

CAME-7800 Gimbal
CAME-7800 3 Axis Camera Gimbal

For more information on the CAME-7800  or any of the 3-axis gimbals we offer click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

came-7800

facebooktwitterpinterestfacebooktwitterpinterest

Moonlight Productions, posted this quick short film test of him using the CAME-7800 gimbal with a Panasonic GH4 paired with the 7-14mm lens. Due to the privacy settings on the video, please click here to watch the video! Or click the image below!
Screen Shot 2015-12-07 at 4.29.04 PM

The CAME-7800 gimbal is a 3-axis gimbal that can hold cameras like the Panasonic GH4 or the heavier DSLR cameras like the Canon 5Dmk2 - as long as it doesn't exceed the 6.5lbs payload. It makes balancing a breeze with it's tool-less roll and YAW design, allowing you to make possible adjustments on the fly. The clickable thumb stick gives you the option to cycle through different operating modes that can increase your creative possibilities.

32 Bit CAME-7800 3 Axis Camera Gimbal

For more information on the CAME-7800 3-axis gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

32 Bit CAME-7800 3 Axis Camera Gimbal

 

facebooktwitterpinterestfacebooktwitterpinterest

Tempo Media UK, went out with his Panasonic GH4 and CAME-7800 and shot this video that showcases BMX rider, Jay Cowley.

The video shows how the CAME-7800 gimbal can be a good piece of equipment to have for shooting action sports like BMX, skateboarding, rollerblading, etc. The CAME-7800 is a great gimbal for DSLR cameras like the Canon 5Dmkiii or mkii but can also work with smaller cameras like a Panasonic GH4 or Sony A7s.

CAME-7800 3-Axis Gimbal

For more information on the CAME-7800 3-axis gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV 7800 3-Axis Gimbal

 

facebooktwitterpinterestfacebooktwitterpinterest

Ken Lauguico, posted this video that highlights a wedding he shot using the CAME-7500 and CAME-Single 3-axis gimbals. He used two different DSLR cameras, the Canon 6D and the Canon 5Dmkii.
The video has a ton of great tracking shots that follow the bride and the groom as they both get ready for the ceremony. The CAME-Single is  a great one handed gimbal that provides extremely steady footage because of the brushless motors with the new encoder technology. The CAME-Single is great for cameras like the Sony A7sii, Panasonic GH4 or the BMPCC.

CAME-TV Single 3-axis GimbalAlthough, the CAME-7500 is no longer available, the CAME-7800 is an upgraded version of the 7500 gimbal and is tool-less.  For more information on the CAME-Single or the CAME-7800 click below! Make sure to also sign up for the newsletter to receive updates and information on any new products we release.

CAME-Single 3-axis gimbalCAME-TV 7800 3-axis gimbal

facebooktwitterpinterestfacebooktwitterpinterest

Here's a quick informative video on how to check the voltage on your gimbal batteries!

If you happen to have a multi-tester laying around, it would be a good idea to check the batteries you have for your gimbal. You want to make sure your batteries are fully charged before testing the voltage.

Screen Shot 2015-10-30 at 11.10.29 AM

The 18650 batteries for the CAME-TV Mini/Mini 2 and the 16340 batteries for the CAME-ACTION gimbal should be reading at 3.7v or higher. The 3S Lipo Battery for the CAME-7800 and 8000 should be giving you a reading of 11v or higher.

For more information on the products mentioned above click below! Make sure to also sign up for the newsletter to receive updates and information on any new products we release.

CAME-Mini 2 3-axis gimbalCAME-ACTION Gimbal For The GoProcame-7800 3-axis Gimbalcame-8000 3-axis Gimbal

facebooktwitterpinterestfacebooktwitterpinterest

, posted this wedding video he shot using the CAME-7800 3-axis gimbal with a Canon 5DmkII + 17-40mm lens! The video shows a lot of great tracking shots of the bride and groom walking through some beautiful outdoor locations.
The CAME-7800 can support setups up to 6.5 pounds, which is perfect for cameras like a Canon 5DmkIII, Canon 7D or even a Panasonic GH4. The CAME-7800 offers multiple modes that you can cycle through by clicking the joystick. The updated version of the 7800 Gimbal has new quick release knobs that make it easier to balance on the roll and yaw axis.

CAME-7800 3-Axis Gimbal(monitor and camera not included)

For more information on the CAME-7800 3-Axis Gimbal click below!

CAME-7800 3-Axis Gimbal