In this quick video posted by Youtube user, Joe Taravella, he takes his new CAME-Single gimbal out for a test run! The footage looks great, especially when he walks up and down the stairs. He used his Sony A7S with a Sony 10-18mm F4 lens.The new CAME-Single is one of the first commercially available 3-Axis 32-bit basecam controlled gimbals that offer brushless motors with Encoders.
Click below for more information on the CAME-Single 3-Axis gimbal.
Youtube user, SWAF Jarrad, posted some quick test footage from his CAME-Single 3-Axis gimbal. In the video, he does mention that he had some trouble in the beginning, but once he changed the lens on his camera, everything was a lot smoother. His setup in the video was a Panasonic GH-4 with a Panasonic 14-140mm lens. Check out his footage below!
Click the picture below for more information on the CAME-Single Gimbal.
Here's a quick test of the CAME-Single that AeroVideo shot with his Sony A7S camera plus a Sony 28-70mm lens.
The new CAME-SINGLE is one of the first commercially available 3-Axis 32-bit basecam controlled gimbals that offer brushless motors with Encoders.The design of the CAME-SINGLE allows the shooter to operate the gimbal with just one hand and has a 1/4-20 and 3/8 threaded mounting point located under the handle.
Click the picture below for more information on the CAME-Single
|This technology prevent motors from losing synchronization, skipping steps and more.||32-bit controller used for the construction of high quality 3-axis camera stabilizing systems.|
|The design of the CAME-SINGLE allows for one hand operation.||Batteries can operate up 10 hours when fully charged.|
ENCODERS ARE OFTEN USED IN ROBOTICS FOR HIGHLY ACCURATE MONITORING OF MOTOR POSITION
YOU MIGHT BE INTERESTED IN THESE OTHER GIMBALS
NextWaveDV, put together this quick video of them testing out the new CAME-Single 3-Axis Gimbal with a Sony A7s!
The CAME-Single is equipped with brushless motors that have encoders. The encoders prevent motors from losing synchronization, skipping steps, decreases power consumption, increases Torque, increases the precision of the stabilization and provides important information about frame and camera angles.
Click the picture below for more information on the CAME-Single 3-Axis Gimbal.