CAME-Single

facebooktwitterpinterestfacebooktwitterpinterest

David Oastler, posted this detailed review of the CAME-Single 3-axis gimbal. He goes through the balancing process with his Sony A7s and toward the end of the video he shows some test footage that he captured while using the gimbal. (NOTE: David Oastler, does state that there was an audio problem with his mic).

The CAME-Single is a tool-less designed gimbal that is made for one-handed operation. The built in joystick allows you to pan and tilt your camera depending on your shot. To turn on the CAME-Single, you press and hold the button located on the side of the handle. To switch between the three different operating modes, you simple click the same button until the mode  you want is selected.

CAME-Single 3-axis Gimbal

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV Single 3-Axis Gimbal

facebooktwitterpinterestfacebooktwitterpinterest

Ken Lauguico, posted this video that highlights a wedding he shot using the CAME-7500 and CAME-Single 3-axis gimbals. He used two different DSLR cameras, the Canon 6D and the Canon 5Dmkii.
The video has a ton of great tracking shots that follow the bride and the groom as they both get ready for the ceremony. The CAME-Single is  a great one handed gimbal that provides extremely steady footage because of the brushless motors with the new encoder technology. The CAME-Single is great for cameras like the Sony A7sii, Panasonic GH4 or the BMPCC.

CAME-TV Single 3-axis GimbalAlthough, the CAME-7500 is no longer available, the CAME-7800 is an upgraded version of the 7500 gimbal and is tool-less.  For more information on the CAME-Single or the CAME-7800 click below! Make sure to also sign up for the newsletter to receive updates and information on any new products we release.

CAME-Single 3-axis gimbalCAME-TV 7800 3-axis gimbal

facebooktwitterpinterestfacebooktwitterpinterest

unnamed

SHARE YOUR IMAGES/VIDEOS ON INSTAGRAM WITH #CAMETV AND YOU MAY BE FEATURED HERE OR ON OUR SITE

 

Leopold Hotz

unnamed-1

Leopold Hotz, went out with his CAME-Mini 2 gimbal and filmed an extremely talented bike rider...Read More>>


Dieter Knuttel

unnamed-2

In his fifth and final part of his CAME-Single review, Dieter Knuttel, talks about his overall experience and adds more test footage of him using the CAME-Single gimbal!...Read More>>


Laurent Briere

unnamed-3

Laurent Briere, used a Panasonic GH4 balanced on a CAME-Single to capture this special event called the "Team ASICS Trail". He was able to capture some amazing shots as he ran next to some of the runners....Read More>>


MrCheesyCam

unnamed-4

MrCheesyCam, uploaded this detailed review of the new CAME-Action gimbal for the GoPro. He goes through all the main specs and even includes some test footage at the end of the video!...Read More>>


YOU MIGHT BE INTERESTED IN THESE OTHER GIMBALS

action unnamed-5 mini2
CAME-ACTION Tool-less CAME-SINGLE Tool-less CAME-MINI 2 Tool-less
The design of the CAME-Action allows for one handed smooth operation... The new CAME-SINGLE is one of the first 3 Axis 32 bit Basecam controlled... The new MINI2 is completely tool-less which allows the operator to change camera setups....
read more read more read more

facebooktwitterpinterestfacebooktwitterpinterest

Here's a quick informative video on how to check the voltage on your gimbal batteries!

If you happen to have a multi-tester laying around, it would be a good idea to check the batteries you have for your gimbal. You want to make sure your batteries are fully charged before testing the voltage.

Screen Shot 2015-10-30 at 11.10.29 AM

The 18650 batteries for the CAME-TV Mini/Mini 2 and the 16340 batteries for the CAME-ACTION gimbal should be reading at 3.7v or higher. The 3S Lipo Battery for the CAME-7800 and 8000 should be giving you a reading of 11v or higher.

For more information on the products mentioned above click below! Make sure to also sign up for the newsletter to receive updates and information on any new products we release.

CAME-Mini 2 3-axis gimbalCAME-ACTION Gimbal For The GoProcame-7800 3-axis Gimbalcame-8000 3-axis Gimbal

facebooktwitterpinterestfacebooktwitterpinterest

1080 Digital Media, recently uploaded his second test of him using the CAME-Single gimbal. The majority of his first video was how it performed while walking. 1080 Digital Media, states that the main focus on this video was for driving and "following a person" shots. He used a Panasonic GH3 recording at 50fps, but states that Vimeo re-conformed it to 25P.

This is mainly a test for driving shots and following (a person) shots. These 2 areas are the rig's strong points so far.

Since the CAME-Single has brushless motors with encoders, it has the ability to make your driving shots incredibly smooth and more stable.

CAME-Single 3-Axis Gimbal

For more information on the CAME-Single 3-Axis Gimbal click below! Make sure to also sign up for the newsletter to receive updates and information on any new products we release.

CAME-Single 3-axis gimbal

 

facebooktwitterpinterestfacebooktwitterpinterest

Recently, Stanly, posted this video of some shots he edited together using his Sony A7s with a Zeiss Loxia 2/50 lens balanced on a CAME-Single.

Even though the video is short, it looks like a very cinematic music video. The beginning shows the main soundcheck, but at the end it transitions directly into the bands live show. The CAME-Single gives the shooter incredibly smooth footage while operating the gimbal with just one hand. The CAME-Single is the first commercially available 3-axis 32-bit basecam controlled gimbal that offers brushless motors with encoders.

CAME-Single 3-axis gimbal

 

For more information on the CAME-Single Gimbal click below! Make sure to also sign up for the newsletter to receive updates and information on any new products we release.

CAME-Single 3-axis gimbal

facebooktwitterpinterestfacebooktwitterpinterest

Vimeo user,Laurent BRIERE - BEtrainedProd, shot this special trail event with his Panasonic GH4 balanced on a CAME-Single gimbal. The video is filled with excellent tracking shots as Laurent Briere follows the runners as they reach the finish line.

The CAME-Single is designed for one handed operation and gives the shooter amazing stability with the new encoder technology thats built into the motors.The 3-axis CAME-Single has a new updated internal battery, which allows the gimbal to operate up to 20 hours on a single charge.

CAME-Single 3-Axis Gimbal For more information on the CAME-Single 3-axis gimbal click below! Make sure to also sign up for the newsletter to receive updates and information on any new products we release.

CAME-TV Single 3-Axis Gimbal

facebooktwitterpinterestfacebooktwitterpinterest

Vimeo user, Dieter Knüttel, has uploaded four detailed videos regarding the CAME-Single gimbal so far and now he uploaded his fifth and final video. He talks about his overall experience using the CAME-Single and talks briefly about balancing it with his Panasonic GH3 mirror-less camera and Lumix 12-35mm lens.

CAME-Single Review With Dieter Knuttel

In this video, he jam packed even more test footage of him using the CAME-Single! It's great to see customers going out on the field and gathering a ton of footage with the CAME-Single. Dieter does state in the description "Any stutter you might see does not come from the gimbal but is a 25p on a 30p timeline problem".

For more information on the CAME-Single 3-Axis Gimbal click below!

CAME-Single 3-Axis Gimbal

facebooktwitterpinterestfacebooktwitterpinterest

Johnnie Behiri from Cinema5D.com recently posted his first impressions and footage of the Sony A7s II. Johnnie Behiri is a BBC freelance cameraman/editor who also films documentaries, commercials, music videos and many other projects.

In the video above, Johnnie, states that he was trying to squeeze “normal footage”, “lowlight” and “slow-motion” parts into one video." In the moving shots Johnnie used our CAME-TV Single Handheld 3-axis gimbal, with the Sony A7sII and Sony 16-35mm lens, which he said was his preferred gimbal.

"CAME-TV CAME-Single is currently my preferred gimbal. Very easy to use and adjust."

We were honored to find out that he was using our CAME-Single gimbal while testing out the new Sony A7sII with great results.

DSC04384-640x360

In the article, Johnnie explains the main advantages of the Sony a7SII from the original a7s:

    • "Internal UHD 4K recording
    • S-log 3 (in addition to S-log 2)
    • Gamma Display Assistant (allows you to monitor your flat S-log 2 or 3 image in a more vivid Rec 709 way)
    • Internal IBIS stabilisation system (5-Axis SteadyShot)
    • A possibility to charge the camera via the USB port
    • A possibility to assign “REC” to other buttons than the awkwardly placed rec button
    • 100fps (PAL), 120fps (NTSC) in HD quality"

He also explains his most noticeable differences from comparing the Sony a7S II to the a7R II:

  • "The addition of S-log 3
  • Up to 120fps in full HD (compared to 60fps)
  • Gamma Display Assist
  • Sony’s a7S II is cleaner in low-light situations compared to the a7R II
  • Because of its higher pixel count, the Sony a7R II can shoot in APS-C S35 crop-mode in 4K. The a7S II can not do that. Further more, any APS-C lens that will be attached to this camera will have strong vignetting at the edges in 4K-mode (APS-C mode is limited to HD resolutions)."

For the full article, make sure to check out Cinema5D.com for Johnnie's full impression of the Sony A7s II or CLICK HERE

For more information on the CAME-Single Gimbal click below!

CAME-TV CAME-Single 3-Axis Gimbal

facebooktwitterpinterestfacebooktwitterpinterest

Milton: Motion & Design, used the CAME-Single gimbal + his Sony A7s with a Sony 20mm lens to shoot a recent real estate video! The video shows a lot of excellent pan & tilt movements that give you a clear idea of how each room looks. There are steady tracking shots that go from the exterior of the house into the interior, which shows the overall flow of the house itself.

The CAME-Single is the first commercially available 3-axis 32-bit  basecam controlled gimbal that has brushless motors with encoders. You're able to operate the CAME-Single easily with just one hand. The tool-less design allows the user to quickly and efficiently balance his or hers camera setup for optimal performance.

CAME-Single 3-Axis GimbalFor more information on the CAME-Single 3-Axis Gimbal click below!

CAME-Single 3-Axis Gimbal

 

facebooktwitterpinterestfacebooktwitterpinterest

1080 Digital Media, uploaded this quick test of him using the CAME-Single straight out of the box! He does make a note in the video description stating that on some of the shots he used a heavier lens(Samyang 14mm) that went over the maximum payload, which caused some shuddering. When he switched to a light lens, the Canon 18-55mm, he said it worked much more smoothly.

The CAME-Single is a 3-axis gimbal that has brushless motors with new encoder technology. Encoders are often used to give highly accurate motor position readings, which will prevent the motors from going out of sync. The large frame on the CAME-Single allows you to fully tilt up and down your camera with ease. A tool-less quick release plate gives the shooter the ability to balance the camera quickly and on the fly.

CAME-Single 3-Axis GimbalFor more information on the CAME-Single 3-Axis Gimbal click below!

CAME-Single 3-Axis gimbal

 

 

facebooktwitterpinterestfacebooktwitterpinterest

jpeg

Encoders Tool-less
This technology prevent motors from losing synchronization, skipping steps and more. Quick and easy to Balance + Quick Release Camera Plate System
Design Battery Life
The design of the CAME-SINGLE allows for one hand operation. Batteries can operate up 10 hours when fully charged.

ENCODERS ARE OFTEN USED IN ROBOTICS FOR HIGHLY ACCURATE MONITORING OF MOTOR POSITION

single

CAME Single Test By Scotty Ray

The hike to Half Dome in Yosemite takes several hours and requires us to travel light. I chose the CAME-Single over other gimbals because of its size and reliability. It does everything I need and fits inside my normal DSLR bag. For the video, I used a Sony A7s with a Sony 16-35 Zeiss version lens. The video was shot in one day which took about 14 hours without having to charge the CAME-Single. Battery life was incredible. Scotty Ray.

jpeg

YOU MIGHT BE INTERESTED IN THESE OTHER GIMBALS

action mini2 8000
CAME-ACTION Tool-less CAME-MINI 2 Tool-less CAME-8000 Tool-less
The new CAME-SINGLE is one of the first commercially available 3 Axis 32 bit Basecam controlled... The new MINI2 is completely tool-less which allows the operator to change camera setups.... A handheld stabilizer designed for camera systems weighing up to 11 pounds, making it suitable for...
read more read more read more

facebooktwitterpinterestfacebooktwitterpinterest

Vimeo user, De Rienzo Films, posted this compilation video of different shots from a wedding they shot with the CAME-Single!
The CAME-Single is a 3-axis 32-bit basecam controlled gimbal that offers brushless motors with encoders. The batteries for the CAME-Single are now completely internal and on a full charge can last about 20 hours. The large frame gives the shooter the ability to fully tilt up and down without the camera hitting the gimbal. With a 1.2kg max payload, the CAME-Single is perfect for your mirror-less cameras like the Sony A7s, Panasonic GH4 or the BMPCC.

CAME-Single 3-Axis Gimbal

For more information on the CAME-Single Gimbal click below!

CAME-Single 3-Axis Gimbal

facebooktwitterpinterestfacebooktwitterpinterest

Thevideomode.com, posted a detailed article about the CAME-Single and the experiences they had with it. In the video, he demos the CAME-Single with his BMPCC and Lumix 7-14mm kens.  In addition to the article, they also uploaded a video review and shot a quick test film that was shot entirely with the CAME-Single. Make sure you check out the full article here!

REVIEW:

The CAME-Single is a 3-axis handheld gimbal that has encoders built into the brushless motors. The new updated version has internal batteries, which increases the battery life for up to 20 hours. The CAME-Single Gimbal is designed to hold small mirror-less cameras like the GH4, A7s or the Blackmagic Pocket Cinema Camera.

TEST FILM:

For information on the CAME-Single 3-Axis Gimbal click below!

came-single 3-axis gimbal with encoders

facebooktwitterpinterestfacebooktwitterpinterest

YOU4REEL.com, posted this quick video that was shot with one of our CAME-TV Gimbals showing the Coty Showcase in Dublin's Georgian building!

The CAME-TV Gimbals are completely 3-Axis and are designed to get shots that look fluid. There are different types of CAME-TV Gimbals that can support a wide range of cameras - from mirror-less cameras to more heavy duty cameras like the Blackmagic Cinema Camera. Recently, the new CAME-Action Gimbal was just announced, which is designed solely for GoPro cameras.

For more information on all the CAME-TV Gimbals that we offer click below!

CAME-TV Gimbal 7800 3-Axis