Tag Archives: 3axis

FacebooktwitterpinterestFacebooktwitterpinterest

Vimeo user, Dieter Knüttel, has uploaded four detailed videos regarding the CAME-Single gimbal so far and now he uploaded his fifth and final video. He talks about his overall experience using the CAME-Single and talks briefly about balancing it with his Panasonic GH3 mirror-less camera and Lumix 12-35mm lens.

CAME-Single Review With Dieter Knuttel

In this video, he jam packed even more test footage of him using the CAME-Single! It's great to see customers going out on the field and gathering a ton of footage with the CAME-Single. Dieter does state in the description "Any stutter you might see does not come from the gimbal but is a 25p on a 30p timeline problem".

For more information on the CAME-Single 3-Axis Gimbal click below!

CAME-Single 3-Axis Gimbal

FacebooktwitterpinterestFacebooktwitterpinterest

Johnnie Behiri from Cinema5D.com recently posted his first impressions and footage of the Sony A7s II. Johnnie Behiri is a BBC freelance cameraman/editor who also films documentaries, commercials, music videos and many other projects.

In the video above, Johnnie, states that he was trying to squeeze “normal footage”, “lowlight” and “slow-motion” parts into one video." In the moving shots Johnnie used our CAME-TV Single Handheld 3-axis gimbal, with the Sony A7sII and Sony 16-35mm lens, which he said was his preferred gimbal.

"CAME-TV CAME-Single is currently my preferred gimbal. Very easy to use and adjust."

We were honored to find out that he was using our CAME-Single gimbal while testing out the new Sony A7sII with great results.

DSC04384-640x360

In the article, Johnnie explains the main advantages of the Sony a7SII from the original a7s:

    • "Internal UHD 4K recording
    • S-log 3 (in addition to S-log 2)
    • Gamma Display Assistant (allows you to monitor your flat S-log 2 or 3 image in a more vivid Rec 709 way)
    • Internal IBIS stabilisation system (5-Axis SteadyShot)
    • A possibility to charge the camera via the USB port
    • A possibility to assign “REC” to other buttons than the awkwardly placed rec button
    • 100fps (PAL), 120fps (NTSC) in HD quality"

He also explains his most noticeable differences from comparing the Sony a7S II to the a7R II:

  • "The addition of S-log 3
  • Up to 120fps in full HD (compared to 60fps)
  • Gamma Display Assist
  • Sony’s a7S II is cleaner in low-light situations compared to the a7R II
  • Because of its higher pixel count, the Sony a7R II can shoot in APS-C S35 crop-mode in 4K. The a7S II can not do that. Further more, any APS-C lens that will be attached to this camera will have strong vignetting at the edges in 4K-mode (APS-C mode is limited to HD resolutions)."

For the full article, make sure to check out Cinema5D.com for Johnnie's full impression of the Sony A7s II or CLICK HERE

For more information on the CAME-Single Gimbal click below!

CAME-TV CAME-Single 3-Axis Gimbal

FacebooktwitterpinterestFacebooktwitterpinterest

, posted this wedding video he shot using the CAME-7800 3-axis gimbal with a Canon 5DmkII + 17-40mm lens! The video shows a lot of great tracking shots of the bride and groom walking through some beautiful outdoor locations.
The CAME-7800 can support setups up to 6.5 pounds, which is perfect for cameras like a Canon 5DmkIII, Canon 7D or even a Panasonic GH4. The CAME-7800 offers multiple modes that you can cycle through by clicking the joystick. The updated version of the 7800 Gimbal has new quick release knobs that make it easier to balance on the roll and yaw axis.

CAME-7800 3-Axis Gimbal(monitor and camera not included)

For more information on the CAME-7800 3-Axis Gimbal click below!

CAME-7800 3-Axis Gimbal

FacebooktwitterpinterestFacebooktwitterpinterest

Milton: Motion & Design, used the CAME-Single gimbal + his Sony A7s with a Sony 20mm lens to shoot a recent real estate video! The video shows a lot of excellent pan & tilt movements that give you a clear idea of how each room looks. There are steady tracking shots that go from the exterior of the house into the interior, which shows the overall flow of the house itself.

The CAME-Single is the first commercially available 3-axis 32-bit  basecam controlled gimbal that has brushless motors with encoders. You're able to operate the CAME-Single easily with just one hand. The tool-less design allows the user to quickly and efficiently balance his or hers camera setup for optimal performance.

CAME-Single 3-Axis GimbalFor more information on the CAME-Single 3-Axis Gimbal click below!

CAME-Single 3-Axis Gimbal

 

FacebooktwitterpinterestFacebooktwitterpinterest

1080 Digital Media, uploaded this quick test of him using the CAME-Single straight out of the box! He does make a note in the video description stating that on some of the shots he used a heavier lens(Samyang 14mm) that went over the maximum payload, which caused some shuddering. When he switched to a light lens, the Canon 18-55mm, he said it worked much more smoothly.

The CAME-Single is a 3-axis gimbal that has brushless motors with new encoder technology. Encoders are often used to give highly accurate motor position readings, which will prevent the motors from going out of sync. The large frame on the CAME-Single allows you to fully tilt up and down your camera with ease. A tool-less quick release plate gives the shooter the ability to balance the camera quickly and on the fly.

CAME-Single 3-Axis GimbalFor more information on the CAME-Single 3-Axis Gimbal click below!

CAME-Single 3-Axis gimbal

 

 

FacebooktwitterpinterestFacebooktwitterpinterest

MrCheesyCam, uploaded this follow up video showing the CAME-Action GoPro Gimbal supporting the weight of the LCD BacPac and an ND Filter!
The CAME-Action Gimbal is designed specifically for the GoPro camera and is made with aluminum alloy - weighing in at only 300 grams(0.66 pounds). The CAME-Action is one of the first commercially available GoPro gimbals that has brushless motors with encoders. A mini USB cable is also provided to give the option to charge your GoPro using the power from the gimbal itself.

came-action gimbal for gopro

For more information on the CAME-Action Gimbal click below!

CAME-Action Gimbal For GoPro

FacebooktwitterpinterestFacebooktwitterpinterest

Youtube user, Juliarta Juliarta, recently uploaded this quick CAME-7800 3-Axis Gimbal test!

The CAME-7800 is a stabilizer that features two side handles for hand-held use and a top handle for low-angle shots. The CAME-7800 offers multiple operation modes, which you can cycle through by clicking on the joystick. You can choose to lock the camera in place along all three axes, have the camera smoothly follow your pan and tilt motions while keeping the horizon level or lock the tilt axis while allowing the camera to pan left and right.

CAME-7800 3-Axis Gimbal

For more information on the CAME-7800 3-Axis Gimbal click below!

came-7800 3-axis gimbal

 

FacebooktwitterpinterestFacebooktwitterpinterest

BBW Production, uploaded this short clip of him using the CAME-7800 3-axis gimbal on a recent music video shoot!
With a max payload of about 6.5lbs, the CAME-7800 is designed to hold heavier DSLR type cameras like a Canon 5Dmk2 or 5Dmk3. The CAME-7800 uses three motors that stabilize the pan, tilt and roll axis, which will compensate for shakes and unwanted vibrations. Quick release knobs have been added to the CAME-7800, making the roll and yaw axis tool-less for easier balancing.

CAME-7800 3-Axis Gimbal

For more information on the CAME-7800 3-Axis Gimbal click below!

CAME-7800 3-Axis gimbal

FacebooktwitterpinterestFacebooktwitterpinterest

Vimeo user, De Rienzo Films, posted this compilation video of different shots from a wedding they shot with the CAME-Single!
The CAME-Single is a 3-axis 32-bit basecam controlled gimbal that offers brushless motors with encoders. The batteries for the CAME-Single are now completely internal and on a full charge can last about 20 hours. The large frame gives the shooter the ability to fully tilt up and down without the camera hitting the gimbal. With a 1.2kg max payload, the CAME-Single is perfect for your mirror-less cameras like the Sony A7s, Panasonic GH4 or the BMPCC.

CAME-Single 3-Axis Gimbal

For more information on the CAME-Single Gimbal click below!

CAME-Single 3-Axis Gimbal

FacebooktwitterpinterestFacebooktwitterpinterest

MrCheesycam, recently uploaded this detailed review on the new CAME-Action Gimbal for the GoPro!

The brand new CAME-Action Gimbal is made solely for the GoPro Hero 3, 3+ and 4. Like the CAME-Single, the CAME-Action is a 3-axis gimbal that has brushless motors with encoders. The CAME-Action is extremely lightweight - weighing in about 300 grams(0.66 pounds) without the camera and batteries. It comes with a durable carrying case that the gimbal fits nicely into.

CAME-Action Gimbal For The GoPro

 

For more information on the CAME-Action Gimbal For The GoPro click below!

CAME-Action Gimbal For The GoPro

FacebooktwitterpinterestFacebooktwitterpinterest

Thevideomode.com, posted a detailed article about the CAME-Single and the experiences they had with it. In the video, he demos the CAME-Single with his BMPCC and Lumix 7-14mm kens.  In addition to the article, they also uploaded a video review and shot a quick test film that was shot entirely with the CAME-Single. Make sure you check out the full article here!

REVIEW:

The CAME-Single is a 3-axis handheld gimbal that has encoders built into the brushless motors. The new updated version has internal batteries, which increases the battery life for up to 20 hours. The CAME-Single Gimbal is designed to hold small mirror-less cameras like the GH4, A7s or the Blackmagic Pocket Cinema Camera.

TEST FILM:

For information on the CAME-Single 3-Axis Gimbal click below!

came-single 3-axis gimbal with encoders

FacebooktwitterpinterestFacebooktwitterpinterest

Leopold Hotz, recently used the CAME-Mini2 Gimbal to film a talented biker cruising through some parks! It was filmed using a Panasonic GH-4 with the Panasonic 12-35mm lens.

The CAME-Mini2 is completely tool-less, allowing the shooter to balance and change camera setups quickly. A quick release system has been added, making it easier to remove or insert your camera onto the Mini2 Gimbal. All the wires are completely enclosed into the frame, so that the wires won't be in the way as you shoot.

CAME-Mini 2 3-Axis Gimbal

For more information on the CAME-Mini2 3-Axis Gimbal click below!

CAME-Mini2 3-Axis Gimbal

FacebooktwitterpinterestFacebooktwitterpinterest

YOU4REEL.com, posted this quick video that was shot with one of our CAME-TV Gimbals showing the Coty Showcase in Dublin's Georgian building!

The CAME-TV Gimbals are completely 3-Axis and are designed to get shots that look fluid. There are different types of CAME-TV Gimbals that can support a wide range of cameras - from mirror-less cameras to more heavy duty cameras like the Blackmagic Cinema Camera. Recently, the new CAME-Action Gimbal was just announced, which is designed solely for GoPro cameras.

For more information on all the CAME-TV Gimbals that we offer click below!

CAME-TV Gimbal 7800 3-Axis

FacebooktwitterpinterestFacebooktwitterpinterest

Vimeo user, Remo Chapeaublanc, uploaded this quick video of him testing out the CAME-Single Gimbal for the first time with his Sony A7RII and 16mm F/2.8 lens.
The size of the CAME-Single is perfect for mirror-less cameras like the GH4, A7s and A7RII. The quick release plate on the CAME-Single is completely tool-less making balancing your camera on the gimbal a breeze. Due to the encoder technology on the CAME-Single, stabilization is more precise and information about the frame and camera angles are more accurate.

CAME-Single 3-Axis Gimbal

For more information on the CAME-Single 3-Axis Gimbal click below.

CAME-Single 3-Axis Gimbal

FacebooktwitterpinterestFacebooktwitterpinterest

Vitographyy, uploaded this short video of some footage he shot using one of our CAME-TV gimbals at the "86 Fest" car show.
CAME-TV gimbals are completely 3-axis and offer multiple operation modes to suit the shot in which you are trying to achieve. There are different types of CAME-TV gimbals that can hold cameras like the GoPro to heavy duty cameras like the BlackMagic Production Camera.

CAME-7800 3-Axis Gimbal

For more information on the different type of CAME-TV Gimbal click below.

CAME-8000 3-Axis Gimbal