In this video, Laurent Briere, used the CAME-Single to shoot this video that highlights a marathon at the royal city of Blois!
That CAME-Single is a 3-axis 32-bit basecam controlled gimbal that is completely tool-less, making it extremely easy to balance your camera. Currently, the CAME-Single is the first basecam controlled gimbal to offer brushless motors with encoders for highly accurate readings of the motors position. The sixth round of pre-orders are currently being accepted and should be shipping out around September 20, 2015.
With the recent release of the long awaited Sony A7RII camera, the CAME-TV A7RII Cage is designed specifically for the A7RII to fit snug in the cage itself. It's CNC machined from aluminum making it lightweight, but also extremely strong. The base plate and the top handle thats included with the A7RII Cage, has industry standard 15mm rod mounting points for attaching accessories like a follow focus and/or a matte box.
Premini, recently uploaded his first CAME-Mini 2 Gimbal test on Vimeo! No post stabilization was added and he did a quick color grade. He filmed the whole thing with a BMPCC + a Kern Paillard Switar 10mm lens.
The CAME-Mini 2 is a tool-less 3-axis gimbal that is built to work with lightweight cameras. All of the wiring is enclosed in the frame itself, making sure that the wiring doesn't get damaged while it's being used. The Mini 2 is completely powered by four 18650 rechargeable batteries that you insert into the gimbals horizontal cross bar.
Vimeo user, PigMintFilm, posted this wedding video that was shot using the CAME-Single Gimbal of the Bride and Groom's first choreographed dance. The video was shot with a Sony A7S + Sony 16mm F/2.8 lens.
The CAME-Single is a 3-axis basecam controlled gimbal that has brushless motors with encoders, which allows highly accurate monitoring of the motors position. The CAME-Single comes with a hard case for storage and a battery charger that you plug into the handle.
Vimeo user, Dieter Knüttel, uploaded this three part CAME-Single review. The first part is an overview and an unboxing, the second is a driving test and the third is labeled "Action Scenes" where he shows how the CAME-Single handles during some running situations.
PART 1: Unboxing And Overview
PART 2: Driving Test
PART 3: Action Scenes With A Dog
The CAME-Single has a max payload of about 2.6 pounds and can work with small cameras like the Sony A7s, Panasonic GH-4 and the BMPCC. The new updated version of the CAME-Single has internal batteries located in the handles that produce higher voltage for more power and stability.
Dan Chung from NewsShooter.com, posted an interview that was filmed at the CAME-TV booth at the BIRTV show in Beijing. The video gives a quick rundown on the specs and profiles of the CAME-Mini 2 Gimbal.
The CAME-Mini 2 is completely tool-less, allowing the operator to change camera setups and re-balance the entire system on the fly. A quick release system has been added to the MINI 2 Gimbal making it easier for the shooter to detach the camera from the gimbal.
The CAME-Single is a 3-axis gimbal that is made primarily for those "on-the-go" shooters who want a quick one-handed setup. With it's built in joystick, it will allow you to easily pan and tilt while the gimbal is in motion or stationary. The 1/4-20" mounting point on the side of the CAME-Single's handle gives the shooter the option to mount a monitor or a smartphone.
The CAME-Single is one of the first one-handed gimbals that uses brushless motors with encoders. It has a high voltage internal battery built into the handle that gives the CAME-Single more power and stability with a run time of roughly 20 hours. Also, if you haven't seen Yakir Yahish, other CAME-Single test check it out below.
The CAME-TV FS7 Cage is designed specifically for the Sony FS7 camera, allowing you to mount multiple useful accessories to the cage itself that will help your shooting experience. The FS7 Cage has two rosette mounting points(one on each side), which gives you the option to mount the FS7's remote control grip directly to the cage.
BBW Production, shot this short video of the "Speedtest Glassdrive Racing" Event entirely on the CAME-7800 Gimbal!
With a max payload of roughly 6.6 pounds, the CAME-7800 Gimbal is designed for cameras like the 5Dmk3, GH4 or the Sony A7s.
In this beautifully shot video, Scotty Ray, traveled to Yosemite National Park to hike up "Half-Dome". He brought along the CAME-Single Gimbal to document his trip and was able to piece together this video.
"I used the CAME-Single over other gimbals because of its size and reliability. It does everything I need and fits inside my normal DSLR bag. It's a great overall gimbal.
For the video, I used a Sony A7s with a Sony 16-35 Zeiss version lens. The video was shot in one day which took about 14 hours without having to charge the CAME-Single."
The CAME-Single is a one handed 3-axis gimbal featuring motor encoders that prevent the motors from losing synchronization and skipping steps, decreases power consumption, increases precision of stabilization, and more. The CAME-Single is perfect for small mirrorless cameras such as the Panasonic GH4, Sony A7s or A7RII, and BlackMagic Pocket Cinema Camera. With the upgraded battery, the gimbal can run up to 20 hours on a single charge.
FocusPulling (.com), uploaded this video about getting some extra battery power for your camera. He goes through a bunch of gear that you might need and if you skip to around the 07:32 mark in the video, he goes over the specs of the CAME-TV VM02 V-Mount Plate.
The CAME-TV VM02 V-Mount Plate offers 12V, 7.2V and 5v outputs and comes with an industry standard 15mm rail mount, so that mounting it to your rig is a breeze.