CAME-7500

CAME-TV – Fall Clearance Sale 7500 Gimbal

vision • September 21, 2016

CAME-TV 7500 ON SALE

CAME-TV 7500 REVIEW VIDEO FROM TOM ANTOS

PANASONIC GH4 AND 3 AXIS GIMBAL CAME TV 7500 BY A HADJ AMEUR

YOU MIGHT BE INTERESTED IN THESE PRODUCTS
FROM OUR USA WAREHOUSE


CAME-ARGO Tool-Less	CAME-SINGLE Tool-Less	1024 LED Bi-Color
The CAME-ARGO is completely tool-less which allows the operator to change camera setups...	The CAME-SINGLE features Camera 32bit boards with Encoders and Handles...	The CAME-TV High CRI 1024 LED Bi-Color LED Panel is a lightweight, portable, and affordable lighting solution....

Samsung NX-1 Test Video That Used The CAME-7500 Gimbal By Hybrid Dynamic Media

vision • December 9, 2015

Hybrid Dynamic Media, posted this quick test video a few days ago of him trying out the Samsung NX-1 camera paired with the CAME-7500 gimbal.

The CAME-7500 is the older version of what is now the CAME-7800 3-axis gimbal. The 7500 gimbal required users to build the gimbal and required tools to balance the camera on the carriage. Now, most of the gimbals that we offer are tool-less, pre-built and some even have encoders built into the motor (CAME-Single & CAME-Action). The CAME-7800 is a good gimbal for setups that might be too heavy for the CAME-Mini 2 or the CAME-Single. We have a variety of gimbal models that can hold small action cameras(CAME-Action) or bigger setups like a Blackmagic Cinema Camera(CAME-8000).

For more information on any of the 3-axis gimbals we offer click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-7500 Gimbal Used In A Wedding Video By Csproductions87

vision • December 8, 2015

Csproductions87, uploaded this wedding he shot using his Panasonic GH4 balanced on a CAME-7500 gimbal with a Rokinon 16mm Cine Lens. The video is a quick highlight video that follows bride and groom as they prepare for the ceremony.

Although, the CAME-7500 gimbal is discontinued, we advise that you check out the updated version of the 7500 - the CAME-7800. The CAME-7800 is based on the original CAME-7500, but it's completely upgraded and pre-assembled. The 7800 has upgraded; handles, quick release plate and is tool-less on the roll and YAW axis.

CAME-7500 Gimbal

CAME-7800 Gimbal

For more information on the CAME-7800 or any of the 3-axis gimbals we offer click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-7500 & CAME-Single Gimbal Used To Film A Wedding By Ken Lauguico

vision • November 3, 2015

Ken Lauguico, posted this video that highlights a wedding he shot using the CAME-7500 and CAME-Single 3-axis gimbals. He used two different DSLR cameras, the Canon 6D and the Canon 5Dmkii.
The video has a ton of great tracking shots that follow the bride and the groom as they both get ready for the ceremony. The CAME-Single is a great one handed gimbal that provides extremely steady footage because of the brushless motors with the new encoder technology. The CAME-Single is great for cameras like the Sony A7sii, Panasonic GH4 or the BMPCC.

Although, the CAME-7500 is no longer available, the CAME-7800 is an upgraded version of the 7500 gimbal and is tool-less. For more information on the CAME-Single or the CAME-7800 click below! Make sure to also sign up for the newsletter to receive updates and information on any new products we release.

Wedding Video Shot Using The CAME-7500 Gimbal By Ken Lauguico

vision • July 22, 2015

The CAME-7500 3-axis gimbal is designed to compensates for shakes, vibration or any unwanted jitter while shooting, allowing you to capture smoother shots that look like your camera is floating freely. The updated version of the CAME-7500, now includes new quick-release knobs that make it easier to adjust on the roll and yaw axis.

Click the picture below for more information on the CAME-TV 7500 Gimbal.

CAME-7500 New Lower Price

vern • July 20, 2015

3 Axis Gimbal	Alexmos Board
For camera systems such as Canon 5D3, Canon 5D2, Canon 7D, Panasonic GH4, and Sony A7.	32-bit controller used for the construction of high quality 3-axis camera stabilizing systems.

Smooth Shots	Handles
3 motors that stabilize along the pan, tilt, and roll axes.	Two side handles for hand-held use and a top handle for low-angle shots or for transporting.

SUPPORTS LOADS UP TO 6.5 LBS AND INCLUDES
PRE-CALIBRATED 32-BIT ALEXMOS CONTROL BOARD

YOU MIGHT BE INTERESTED IN THESE OTHER GIMBALS


CAME-Single With Encoders	CAME-8000 Tool-less	CAME-7800 Tool-less
One of the first commercially available 3 Axis 32 bit Basecam controlled gimbals to offer motors with Encoders ....	A handheld stabilizer designed for camera systems weighing up to 11 pounds, making it suitable for...	Designed for camera systems such as Canon 5D3, Canon 5D2, Canon 7D, Panasonic GH4, and Sony A7...