CAME-ARGO

FacebooktwitterpinterestFacebooktwitterpinterest

CREATIVE Team, recently uploaded their second test video on the CAME-TV ARGO gimbal! The video was shot with the Canon 5DmkIII with three different lenses; the Canon 24-105mm, 50mm and 18-200mm!
The CAME-ARGO features a 32 bit Alexmos Board and is completely tool-less, making balancing your camera setup easy and quick. All of the motors are equipped with encoders, which makes the ARGO's performance more smooth and accurate, along with increasing the lifespan of the battery.

CAME-ARGO 3 Axis Gimbal Camera 32bit Boards With Encoders

For more information on the CAME-ARGO click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-ARGO 3 Axis Gimbal Camera 32bit Boards With Encoders

 

 

FacebooktwitterpinterestFacebooktwitterpinterest

Life2PRO - Travel Video, posted this stunning travel video of Siargao Island in the Philippines. He filmed it with the CAME-ARGO gimbal paired with the Sony A7s and the Zeiss 24-70mm lens!

The CAME-ARGO features a 32 bit Alexmos Board and is completely tool-less for easy balancing. All of the motors are equipped with encoders, making the gimbals performance more smooth and accurate. On the bottom of the ARGO there's a video transmitter along with a D-Tap out, which you can power an accessory like a wireless follow focus.

CAME-ARGO 3 Axis Gimbal Camera 32bit Boards With Encoders

For more information on the CAME-ARGO click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-ARGO 3 Axis Gimbal Camera 32bit Boards With Encoders

FacebooktwitterpinterestFacebooktwitterpinterest

Youtube user, StabilizerNews uploaded this short film that follows a mountain biker as he goes for a ride through the woods. Except for the drone shots, the short was filmed mostly with the CAME-TV ARGO gimbal! He used the Canon 5DmkIII with two different lenses - the Canon 16-35mm & the Rokinon 35mm.
The CAME-ARGO features a 32 bit Alexmos Board and is completely tool-less. All of the motors are equipped with encoders, making the performance much more smooth and accurate while also increasing the lifespan of the battery. On the bottom of the ARGO's frame,  there's a video transmitter along with a D-Tap out, which you can power an accessory like a wireless follow focus.

CAME-ARGO 3 Axis Gimbal Camera 32bit Boards With Encoders

For more information on the CAME-ARGO click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-ARGO 3 Axis Gimbal Camera 32bit Boards With Encoders

FacebooktwitterpinterestFacebooktwitterpinterest

Vimeo user, BlackStunt Prod uploaded his latest demo reel that showcases a bunch of his most recent work. Most of the tracking shots that are in the demo reel were shot with the CAME-TV ARGO Gimbal!

BlackStunt Prod, filmed his projects with the Canon 70D with multiple lenses: the Canon 10-22mm, Canon 50mm f1.8 and a the Canon 24-70mm f2.8. He does mention that he also used a handheld stabilizer for some of the other shots. The CAME-ARGO features a 32 bit Alexmos board and is completely tool-less. All of the motors are equipped with encoders, which increases the overall performance of the ARGO and makes the battery last a lot longer.CAME-TV ARGO 3-Axis Gimbal

The entire top handle bar can easily be separated from the gimbal, which than can be mounted to other devices like a crane, slider or drone with the included adapter plate.

For more information on the CAME-ARGO click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV ARGO 3-Axis Gimbal

 

FacebooktwitterpinterestFacebooktwitterpinterest

HDVideoshop Berlin, uploaded this quick overview video of our CAME-TV ARGO Gimbal. The video shows the quick balancing process and also includes some sample footage. They used the ARGO with the Sony A7S camera.

The CAME-ARGO features a 32 bit Alexmos board and is completely tool-less. All of the motors are equipped with encoders, which makes the performance much more smooth and accurate - also, increasing the lifespan of the battery. On the bottom of the ARGO there's a video transmitter along with a D-Tap out, which can power accessories like a wireless follow focus.
CAME-TV ARGO Gimbal

 

 

For more information on the CAME-ARGO click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV ARGO Gimbal

FacebooktwitterpinterestFacebooktwitterpinterest

Youtube user, TheAwesomeSam, uploaded this video of how he put together a DIY support backpack for his CAME-ARGO 3-axis gimbal!

With just a few simple items he bought buy online or at a hardware store, TheAwesomeSam was able to build a backpack that hooks onto the handles of his ARGO. A support backpack is known to relieve some of the stress in your arms while holding the gimbal for long periods of time.DIY Support Backpack

The CAME-ARGO features a 32 bit Alexmos Board and is completely tool-less. All of the motors are equipped with encoders, which make the ARGO's performance much more smooth and accurate, while also increasing the lifespan of the battery. The CAME-ARGO comes with a monitor mount and a wireless remote, allowing you to control the gimbal remotely and switch between modes.

CAME-TV ARGO 3-Axis Gimbal

For more information on the CAME-ARGO click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV ARGO 3-Axis Gimbal

FacebooktwitterpinterestFacebooktwitterpinterest

Perbenyik Productions, recently got his hands on the new CAME-TV ARGO gimbal and uploaded this quick unboxing video that goes through everything you get when you purchase the gimbal.

In his second video, Perbenyik Productions, goes through a quick setup/balancing of the CAME-ARGO with his Panasonic GH4 and a Lumix 14-42mm lens.

The CAME-TV ARGO is completely tool-less, making it easy to balance your camera straight out of the box. The ARGO can hold setups that don't exceed the max payload of about 6.6 lbs. All the motors on the ARGO are equipped with encoders that make the gimbals performance more stable and precise. The middle section of the ARGO has a quick release battery that has a lifespan of about 15 hours (NOTE: if you have other accessories that are also being powered by the gimbal, the lifespan will be less).

CAME-TV ARGO 3-Axis Gimbal

For more information on how to pre-order the new CAME-ARGO click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV ARGO 3-Axis Gimbal

 

 

FacebooktwitterpinterestFacebooktwitterpinterest

MrCheesycam, uploaded this detailed overview on the new CAME-TV ARGO gimbal were he unboxes, balances and goes through some of the operating modes. The camera he balanced on the ARGO was his Panasonic GH4 and Sigma 20mm f/1.8 lens.


All the motors on the brand new CAME-TV ARGO are equipped with encoders, which makes the gimbal perform more accurately and precise. It comes with a pre-calibrated 32-bit ALEXMOS board and a wireless joystick that you can control and switch to different operating modes. The ARGO comes with a hard case that can fit all the pieces of the gimbal and also the carbon fiber foldable stand.

CAME-ARGO 3 Axis Gimbal Camera 32bit Boards With Encoders

For more information on how to pre-order the new CAME-ARGO click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-ARGO 3 Axis Gimbal Camera 32bit Boards With Encoders

FacebooktwitterpinterestFacebooktwitterpinterest

HDVideshop Berlin, uploaded this quick overview of our new CAME-ARGO 3-axis gimbal. The video goes over the main features of the ARGO and how easy it is to setup. In the beginning of the video, he has a Sony A7s with a Zeiss 24-70mm F/4 lens balanced on the  CAME-ARGO.


The CAME-ARGO features a 32 bit Alexmos board and is completely tool-less, which makes balancing your camera on the gimbal a breeze. A wireless remote is included with the CAME-ARGO, which allows you to control the gimbal from a distance and also switch to different operating modes. There is a D-Tap output on the bottom of the gimbals frame, allowing you to power accessories like a wireless follow focus.

CAME-TV ARGO 3-Axis Gimbal

For more information on how to pre-order the new CAME-ARGO click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV ARGO 3-Axis Gimbal

FacebooktwitterpinterestFacebooktwitterpinterest

CAME-TV ARGO

A HANDHELD 3-AXIS STABILIZED GIMBAL SYSTEM

CAME-TV ARGO CAME-TV ARGO

YOU MIGHT BE INTERESTED IN THESE OTHER GIMBALS

action unnamed-5 mini2
CAME-ACTION Tool-less CAME-SINGLE Tool-less CAME-MINI 2 Tool-less
The design of the CAME-Action allows for one handed smooth operation... The new CAME-SINGLE is one of the first 3 Axis 32 bit Basecam controlled... The new MINI2 is completely tool-less which allows the operator to change camera setups....
read more read more read more

FacebooktwitterpinterestFacebooktwitterpinterest

Introducing the brand new CAME-ARGO gimbal with encoders! The ARGO is a newly designed gimbal that is extremely lightweight, but is able to handle pretty heavy DSLR camera setups.
CAME-ARGO 3 Axis Gimbal Camera 32bit Boards With EncodersThe CAME-ARGO has a pre-calibrated 32-bit Alexmos control board and a max payload of about 3kg (6.6 lbs). The CAME-ARGO comes with a new foldable stand that will make it easier for you to balance and setup the gimbal, especially if you're on the go. As of right now, there is no exact date of when the ARGO will be available to purchase, but it will be soon!

CAME-ARGO 3 Axis Gimbal Camera 32bit Boards With Encoders

For more information on how to pre-order the new CAME-ARGO click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-ARGO 3 Axis Gimbal Camera 32bit Boards With Encoders