YOU4REEL.com, posted this quick video that was shot with one of our CAME-TV Gimbals showing the Coty Showcase in Dublin's Georgian building!
The CAME-TV Gimbals are completely 3-Axis and are designed to get shots that look fluid. There are different types of CAME-TV Gimbals that can support a wide range of cameras - from mirror-less cameras to more heavy duty cameras like the Blackmagic Cinema Camera. Recently, the new CAME-Action Gimbal was just announced, which is designed solely for GoPro cameras.
Vimeo user, Remo Chapeaublanc, uploaded this quick video of him testing out the CAME-Single Gimbal for the first time with his Sony A7RII and 16mm F/2.8 lens.
The size of the CAME-Single is perfect for mirror-less cameras like the GH4, A7s and A7RII. The quick release plate on the CAME-Single is completely tool-less making balancing your camera on the gimbal a breeze. Due to the encoder technology on the CAME-Single, stabilization is more precise and information about the frame and camera angles are more accurate.
Vitographyy, uploaded this short video of some footage he shot using one of our CAME-TV gimbals at the "86 Fest" car show. CAME-TV gimbals are completely 3-axis and offer multiple operation modes to suit the shot in which you are trying to achieve. There are different types of CAME-TV gimbals that can hold cameras like the GoPro to heavy duty cameras like the BlackMagic Production Camera.
For more information on the different type of CAME-TV Gimbal click below.
Vimeo user, De Rienzo Films, went out to Trafalgar Square in London and grabbed some shots with his Panasonic GH3 with a 14mm pancake lens balanced on a CAME-Single 3-Axis Gimbal.
The CAME-Single is a handheld gimbal that is made for smaller cameras like the Sony A7s, BMPCC or the Panasonic GH3/GH4. The brushless motors with encoders, prevent the motors from being out of sync and can give you detailed information about the frame and the angle of your camera. The internal rechargeable batteries are fitted inside the handle of the CAME-Single itself, making it easier to plug-in and charge.
Youtube user, DayZeroSurvivors, uploaded this quick test of him putting the CAME-Single through a running test with his Panasonic GH-4 + Lumix G X Vario PZ 14-42mm lens.
The CAME-Single has a larger frame than most pistol-grip style gimbals, allowing you to fully tilt up and down. The brushless motors are also significantly larger and have encoders built in them for more accurate motor readings. The CAME-Single has a run time of about 20 hours when the battery is fully charged.
Vimeo user, Valdas Kotovas, posted this quick video of him using the CAME-Single with his Sony A7s camera and Sony 24-70mm lens.
The CAME-Single gimbal is the first commercially available basecam controlled gimbal that offers brushless motors with encoders. Encoders are usually used in robotics to get extremely accurate monitoring of the positions of the motors. The CAME-Single is tool-less, making it easy to balance your camera while it's on the gimbal.
Youtube user, Ed Rakel, posted this quick video of him using his new CAME-Single Gimbal with a Panasonic GH-4 + Olympus 12 mm f2.0.
The CAME-Single is designed around the idea of being able to operate a gimbal with just one hand. It's 3-axis with a 32-bit board and the brushless motors have encoders, making it the first basecam controlled gimbal on the market with encoders. The max payload the CAME-Single can handle is 2.6lbs and is designed for smaller cameras like the Sony A7s, Panasonic GH4 or the Blackmagic Pocket Cinema Camera.
Scotty Ray from Satostudiogear, posted a video a little bit ago of his hike up the famous "Half Dome" in Yosemite National Park. He recently uploaded this video of his review of the CAME-Single and mentions how he was able to pull off some of the camera shots he was able to capture in his Yosemite video.
"It was awesome to be able to pull a gimbal out of your backpack and have it up and running in 30 seconds... I also attached the Gimbal to the top of my Tripod by removing the manfrotto head. This is useful for shots you can't normally reach, or over tall cliffs " -Scotty Ray
If you haven't seen his "Half Dome" Yosemite video, make sure to check it out below!
Cinema5D, passed by the CAME-TV booth during IBC 2015 and shot this quick interview with one of our representatives about the CAME-Single gimbal!
The CAME-Single is a 3-axis gimbal that has extremely accurate readings because of the encoders that are built into the motor. The CAME-Single has a built in battery in the handle itself that you can charge by plugging the charging cable directly to the handle. There's a 1/4-20" mounting point on the side of the handle and a 3/8" along with another 1/4-20" mounting point on the bottom of the handle.
In this video, Laurent Briere, used the CAME-Single to shoot this video that highlights a marathon at the royal city of Blois!
That CAME-Single is a 3-axis 32-bit basecam controlled gimbal that is completely tool-less, making it extremely easy to balance your camera. Currently, the CAME-Single is the first basecam controlled gimbal to offer brushless motors with encoders for highly accurate readings of the motors position. The sixth round of pre-orders are currently being accepted and should be shipping out around September 20, 2015.
Vimeo user, PigMintFilm, posted this wedding video that was shot using the CAME-Single Gimbal of the Bride and Groom's first choreographed dance. The video was shot with a Sony A7S + Sony 16mm F/2.8 lens.
The CAME-Single is a 3-axis basecam controlled gimbal that has brushless motors with encoders, which allows highly accurate monitoring of the motors position. The CAME-Single comes with a hard case for storage and a battery charger that you plug into the handle.
Vimeo user, Dieter Knüttel, uploaded this three part CAME-Single review. The first part is an overview and an unboxing, the second is a driving test and the third is labeled "Action Scenes" where he shows how the CAME-Single handles during some running situations.
PART 1: Unboxing And Overview
PART 2: Driving Test
PART 3: Action Scenes With A Dog
The CAME-Single has a max payload of about 2.6 pounds and can work with small cameras like the Sony A7s, Panasonic GH-4 and the BMPCC. The new updated version of the CAME-Single has internal batteries located in the handles that produce higher voltage for more power and stability.
The CAME-Single is a 3-axis gimbal that is made primarily for those "on-the-go" shooters who want a quick one-handed setup. With it's built in joystick, it will allow you to easily pan and tilt while the gimbal is in motion or stationary. The 1/4-20" mounting point on the side of the CAME-Single's handle gives the shooter the option to mount a monitor or a smartphone.
The CAME-Single is one of the first one-handed gimbals that uses brushless motors with encoders. It has a high voltage internal battery built into the handle that gives the CAME-Single more power and stability with a run time of roughly 20 hours. Also, if you haven't seen Yakir Yahish, other CAME-Single test check it out below.
In this beautifully shot video, Scotty Ray, traveled to Yosemite National Park to hike up "Half-Dome". He brought along the CAME-Single Gimbal to document his trip and was able to piece together this video.
"I used the CAME-Single over other gimbals because of its size and reliability. It does everything I need and fits inside my normal DSLR bag. It's a great overall gimbal.
For the video, I used a Sony A7s with a Sony 16-35 Zeiss version lens. The video was shot in one day which took about 14 hours without having to charge the CAME-Single."
The CAME-Single is a one handed 3-axis gimbal featuring motor encoders that prevent the motors from losing synchronization and skipping steps, decreases power consumption, increases precision of stabilization, and more. The CAME-Single is perfect for small mirrorless cameras such as the Panasonic GH4, Sony A7s or A7RII, and BlackMagic Pocket Cinema Camera. With the upgraded battery, the gimbal can run up to 20 hours on a single charge.