Blog

FacebooktwitterpinterestFacebooktwitterpinterest

Youtube user, Brandon Rice uploaded this quick review on the new CAME-Optimus gimbal! The video goes through his first impressions and he even adds a little bit of sample footage at the end. The camera he used in the video was the Panasonic GH4.

The CAME-Optimus is the successor to our very successful CAME-Single gimbal. The new frame design allows the Optimus gimbal to be operated completely inverted or underslung. All motors rotate a full 360 degrees without limitation for greater range and flexibility during operation. The single handle can be changed to Dual Handles depending on the camera operator's requirement.

CAME-OPTIMUS 3 Axis Gimbal Camera 32bit Boards With Encoders

For more information on the CAME-TV Optimus gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-OPTIMUS 3 Axis Gimbal Camera 32bit Boards With Encoders

FacebooktwitterpinterestFacebooktwitterpinterest

Hungry Boy Productions, shared this wonderfully shot wedding highlight video that they recently filmed. They used a bunch of a gear for the shoot and one piece of gear they used was our CAME-TV Single gimbal! Although, they didn't specify what their exact setup with the CAME-Single was - they did say this,

"All gimbal, slider shots taken with Tokina 11-16 F2.8 Lens and all slow motion done on a blackmagic micro cinema camera (bmmcc) with a Panasonic 12-35 2.8"

The CAME-Single offers full 3-axis stabilization with a built-in joystick and brushless motors with encoders. It's extremely easy to balance with it's tool-less design and portable body, making it easy to take with you for shoots. The CAME-Single has an internal battery that will allow it to operate for up to 20 hours.

CAME-TV Single 3-Axis GimbalFor more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV Single 3-Axis Gimbal

 

FacebooktwitterpinterestFacebooktwitterpinterest

MyLifeIn4K, uploaded this video that was filmed by Bruce Doan of a video walkthrough at the Soka University International Festival. The video is great because it gives a little bit of insight of how it must of been walking through the crowd at the festival. It was filmed with the CAME-TV Single gimbal paired with the Sony a6300 with a Sony 10-18mm lens!

The CAME-Single works as a great portable 3-axis gimbal that can easily be balanced and carried around. With Single now including the new Dual Gimbal Handles, it provides the gimbal operators with smooth camera panning and tilt motions. The tool-less adjustment of the Dual Handles allow for easy configuration and can even act as a stand when the handles are positioned right angled to the cross bar.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

FacebooktwitterpinterestFacebooktwitterpinterest

GlainKanVision, recently uploaded this quick test video of him trying out the CAME-Single with the new Sony a6300 camera! The camera lens he used was the Sony Zeiss 16-70 F/4.

The Single gimbal is designed to be operated with just one hand. The encoders on the CAME-Single: prevent the motors from losing sync/skipping steps, provides important information about the frame and also decreases the power consumption - increasing the battery life. The Single now comes with the new Dual Gimbal Handles that will give the gimbal operator smoother pan & tilt motions.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With EncodersFor more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

 

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

FacebooktwitterpinterestFacebooktwitterpinterest

unnamed

USE COUPON CODE:
FOURTHSLIDER

Screen Shot 2016-07-04 at 2.01.51 AM

YOU MIGHT BE INTERESTED IN THESE GIMBALS

action CAME-TV ACTION 2 Gimbal Smartphones CAME-TV ARGO 3-Axis Gimbal
CAME-ACTION Tool-less CAME-ACTION 2
Tool-less
CAME-ARGOTool-less
The design of the CAME-Action allows for one handed smooth operation... 32 Bit Boards with brushless motors and Encoders designed for iPhone and similar sized phones... The CAME-ARGO is completely tool-less which allows the operator to change camera setups....
read more read more read more

FacebooktwitterpinterestFacebooktwitterpinterest

We were luck enough to have the Gear Addix crew pass by our booth and film a little interview on some of the CAME-TV Gimbals that we showcased at the 2016 Cine Gear Expo!

The size of the CAME-Single is perfect for mirror-less cameras such as the Panasonic GH4, Sony A7s | A7RII, and BlackMagic Pocket Cinema Cameras. The encoders on the CAME-Single prevent motors from losing synchronization, provides important information about frame and camera angles, decreases power consumption (longer battery life), increases Torque and precision of stabilization.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders
(CAME-Single W/ Dual Handles)

The Optimus model also features encoders and allows for one hand operation, but with all of the controls and battery now relocated outside of the handle, the single handle can be changed to Dual Handles depending on the camera operator's requirement.  All motors rotate a full 360 degrees without limitation for greater range and flexibility during operation.

CAME-OPTIMUS 3 Axis Gimbal Camera 32bit Boards With Encoders
(CAME-Optimus)

The CAME-Mini 3 is our latest edition to the CAME-MINI Gimbal Series. The new Mini 3 uses basecam 32 bit controllers with encoders. All of the wiring and electronics are completely enclosed into the frame, offering a clean professional appearance and protecting the wiring.

CAME-Mini 3 3-Axis Gimbal Camera 32bit Boards With Encoders
(CAME-Mini 3)

For more information on our entire CAME-TV Gimbal line click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

came-optimus_07

 

FacebooktwitterpinterestFacebooktwitterpinterest

Youtube user, MrCheesyCam uploaded this detailed instructional video on how to setup our CAME-Accordion Jib!

The Accordion Crane features an extending scissor arm that puts the camera right where you need it. The accordion motion allows the arm to extend 4.7 Meters (15 feet) out and then retract back in. The Accordion is controlled by a rocker switch and the drive is powered by a V-Mount battery (not included).

CAME-TV Accordion Jib Crane

For more information on the CAME-Accordion Jib click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV Accordion Jib Crane

FacebooktwitterpinterestFacebooktwitterpinterest

CREATIVE Team, recently uploaded their second test video on the CAME-TV ARGO gimbal! The video was shot with the Canon 5DmkIII with three different lenses; the Canon 24-105mm, 50mm and 18-200mm!
The CAME-ARGO features a 32 bit Alexmos Board and is completely tool-less, making balancing your camera setup easy and quick. All of the motors are equipped with encoders, which makes the ARGO's performance more smooth and accurate, along with increasing the lifespan of the battery.

CAME-ARGO 3 Axis Gimbal Camera 32bit Boards With Encoders

For more information on the CAME-ARGO click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-ARGO 3 Axis Gimbal Camera 32bit Boards With Encoders

 

 

FacebooktwitterpinterestFacebooktwitterpinterest

Vimeo user, Dieter Knüttel uploaded his first test video on the new CAME-Optimus 3-axis gimbal! He filmed it with the Panasonic GH4 and Lumix 12-35mm lens. Dieter, does state in the description of the video that the shaky part at 0:52 seconds is due to his hand touching the seat and not a caused by the Optimus.

The CAME-Optimus is the successor to our very successful CAME-Single gimbal. The Optimus model also features encoders and allows for one hand operation, but with all of the controls and battery now relocated outside of the handle, the single handle can be changed to Dual Handles depending on the camera operator's requirement.  All motors rotate a full 360 degrees without limitation for greater range and flexibility during operation.

CAME-OPTIMUS 3 Axis Gimbal Camera 32bit Boards With Encoders

 

For more information on the CAME-TV Optimus gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-OPTIMUS 3 Axis Gimbal Camera 32bit Boards With Encoders

 

FacebooktwitterpinterestFacebooktwitterpinterest

unnamed

USE COUPON CODE:
FOURTHSLIDER

Screen Shot 2016-07-04 at 2.01.51 AM

YOU MIGHT BE INTERESTED IN THESE OTHER GIMBALS

action CAME-TV ACTION 2 Gimbal Smartphones CAME-TV ARGO 3-Axis Gimbal
CAME-ACTION Tool-less CAME-ACTION 2
Tool-less
CAME-ARGOTool-less
The design of the CAME-Action allows for one handed smooth operation... 32 Bit Boards with brushless motors and Encoders designed for iPhone and similar sized phones... The CAME-ARGO is completely tool-less which allows the operator to change camera setups....
read more read more read more

FacebooktwitterpinterestFacebooktwitterpinterest

Vimeo user, XFactor Aerial uploaded this quick test video of him using the CAME-Single paired with his Sony a6300 camera. The lens he used was the 15mm-55mm Var Zoom. Due to the privacy settings set by the user, please click the image below to watch it!

579109730_1280

XFactor Aerial, shot the test at the MetLife Stadium during the Copa America 2016 event. The size of the CAME-Single is perfect for mirror-less cameras such as the Panasonic GH4, Sony A7s | A7RII, and BlackMagic Pocket Cinema Cameras. The encoders on the CAME-Single prevent motors from losing synchronization, provides important information about frame and camera angles, decreases power consumption (longer battery life), increases Torque and precision of stabilization.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

FacebooktwitterpinterestFacebooktwitterpinterest

Vimeo user, Filips Baumanis uploaded this nicely shot montage video of Hiiumaa Island. The video was shot with the CAME-ACTION gimbal with the GoPro Hero 4 Silver!
The CAME-ACTION gimbal for the GoPro features brushless motors with encoders. The gimbal is constructed from aluminum alloy and weighs in at 300 grams / 0.66 pounds (without the battery and camera) and is compatible with the GoPro 3, 3+ & 4.

CAME-Action Gimbal 3 Axis For Gopro 32 Bit Boards With Encoders

For more information on the CAME-ACTION gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Action Gimbal 3 Axis For Gopro 32 Bit Boards With Encoders

 

FacebooktwitterpinterestFacebooktwitterpinterest

CAME-TV Folding Arm Slider SL02

THE UNIQUE FOLDING ARM SLIDER PROVIDES BOTH LINEAR AND PANNING MODES

CAME-TV Folding Arm Slider SL02

YOU MIGHT BE INTERESTED IN THESE OTHER GIMBALS

CAME-TV Prodigy 3-Axis Gimbal CAME-TV Mini 3 3-Axis Gimbal CAME-TV ARGO 3-Axis Gimbal
CAME-Prodigy
Tool-less
CAME-Mini 3
Tool-less
CAME-Argo
Tool-less
The CAME-PRODIGY gimbal is the physically largest of our gimbal family..... 32 Bit Boards with brushless motors and Encoders with a 5.8G video transmitter... The CAME-ARGO is completely tool-less which allows the operator to change camera setups....
read more read more read more

FacebooktwitterpinterestFacebooktwitterpinterest

Life2PRO - Travel Video, posted this stunning travel video of Siargao Island in the Philippines. He filmed it with the CAME-ARGO gimbal paired with the Sony A7s and the Zeiss 24-70mm lens!

The CAME-ARGO features a 32 bit Alexmos Board and is completely tool-less for easy balancing. All of the motors are equipped with encoders, making the gimbals performance more smooth and accurate. On the bottom of the ARGO there's a video transmitter along with a D-Tap out, which you can power an accessory like a wireless follow focus.

CAME-ARGO 3 Axis Gimbal Camera 32bit Boards With Encoders

For more information on the CAME-ARGO click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-ARGO 3 Axis Gimbal Camera 32bit Boards With Encoders

FacebooktwitterpinterestFacebooktwitterpinterest

Vimeo user, Laurent BRIERE shared this awesome video that covers the 5th edition of the "Trail de Sancerre" marathon in France! He covered the event with the CAME-Single gimbal paired with the Panasonic GH4 and Lumix 12-35mm lens.
The encoders on the CAME-Single: prevent the motors from losing sync/skipping steps, provides important information about the frame and also decreases the power consumption - increasing the battery life. The Single now comes with the new Dual Gimbal Handles that will give the gimbal operator smoother pan & tilt motions.

CAME-TV Single GimbalFor more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV Single Gimbal