Tag Archives: tool-less gimbal

•

Laurent BRIERE, follows French ultra trail runner, Yoann Stuck in this documentary style video called "Town To Trail". In the video Laurent Briere used the CAME-Single paired with his Panasonic GH-4 and 12-35mm F2.8 lens.

The CAME-Single is perfect for these types of shots that require a lot of tracking and movement. The CAME-Single has a max payload of about 2.6 lbs, making it perfect for mirror-less cameras. The pieces all fit into one carrying case, which make it extremely portable and easy to carry around between locations. The CAME-Single has internal rechargeable batteries that are built into the hand grip, giving the CAME-Single more power and stability due to a higher voltage output.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

 

Related Posts:

•

Andrew Gerard, posted this final scene from a short film he's been working on. The scene was filmed entirely with the CAME-Single gimbal and his Sony A7Rii with the Fe 28mm F2 lens!
The CAME-Single is one of the first basecam controlled gimbals that offer encoders. The encoders will prevent the motors from losing sync, increase torque/stabilization and decrease power consumption. The CAME-Single is perfect for mirror-less cameras like the Panasonic GH4, the Sony A7S series, A7RII and the Blackmagic Pocket Cinema cameras. If you haven't scene Andrew Gerard last Came-Single video, watch it below!

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

 

 

Related Posts:

•

The sounds built into the gimbal serve several key functions - notifying you 1) when your gimbal is powered up, 2) when you've successfully switched profiles, 3) when your battery is running out, or 4) when it senses a general error within the system.

However, when you're right in the middle of a production, there are moments when silence is absolutely necessary - such as a wedding, a film/tv scene with recorded audio, etc. For these situations, it may be necessary to temporarily deactivate (or mute) the sounds coming from your gimbal. Simply connect to the SimpleBGC software, and then go into the Service tab and select which sounds you want to turn off.

You can always re-activate the audio alerts whenever you feel the need to.
service_audio1

Related Posts:

•

Andrew Gerard, recently posted this fight scene called "Two Faced", which he shot with the CAME-Single and Sony A7Rii camera with a Fe 28mm F2 lens. The short film follows two guys as they duke it out in a boxing gym.

The CAME-Single was used the whole time for the short and he shot all of it in one day. The CAME-Single has encoders built into the brushless motors allowing the gimbal to have an incredible amount of stability. A 1/4-20" and a 3/8" are located underneath the handle for mounting the CAME-Single to a tripod/monopod or to a jib. The CAME-Single comes with a hard case for easy packing and portability.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

 

 

Related Posts:

•

, recently posted his second test of the CAME-Single paired with his Sony A7Sii! The video clocks in at about a minute, but it's filled with great shots that show the stability of the CAME-Single. No post stabilization was added.

The CAME-Single is designed to be lightweight, portable and easy to use with just one hand. It has a max payload of about 2.6lbs, making it perfect for cameras like the Sony A7S series, Panasonic GH4, BMPCC, etc. If you want to see Pano Verino's first test, check it out below!

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

 

Related Posts:

•

Pano Verino, uploaded his first test with his Sony A7Smk2 balanced  with the CAME-Single gimbal! He does state that there was No Post Stabilization added in post, but the Sony's in camera image stabilization is turned on.

The video is short and mainly focuses on how his setup handles while running and walking. The CAME-Single is one of the first commercially available 3 Axis 32 bit basecam controlled gimbals to offer brushless motors with Encoders. Encoders are often used in Robotics for highly accurate monitoring of the motors position. The design of the CAME-Single is made for shooters to operate the gimbal with just one hand and a 1/4 and 3/8 thread is located under the handle for mounting options.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CameTVSingle

Related Posts:

•

Mesh Frequency, uploaded this quick field test he did with his new CAME-Single gimbal!

Mesh Frequency, states that the main purpose of this video was to see how the CAME-Single handles when following a subject. He also mention how cold and windy it was while filming this field test.

It was cold and windy but it took only 5 minutes to set up the gimbal. I messed up the focus in few places but my main goal was to follow the subject. Unlike what few reviews on line said the whole thing fit in my bag. Over all I am very happy with the tool.

The CAME-Single offers full 3-axis stabilization with a built in joystick and brushless motors with encoders. It's extremely easy to balance with it's tool-less design and portable body, making it easy to take with you for shoots. The CAME-Single has an internal battery that will allow it to operate for up to 20 hours. 

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

 

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

Related Posts:

•

unnamed

The CAME-Single Wireless Remote is super convenient when you want to remotely control Pan and Tilt on (some) CAME-SINGLE Gimbals. The remote feature works well with a second operator controlling the camera’s movements as the first operator moves around the set. Achieve perfect framing and complete more complex camera movements by working with Dual Operators. If you have your gimbal mounted to the end of a long Crane or Jib you can control easily control the camera with this remote. The system connects via Bluetooth up to 30 feet away. (Range will vary depending on Line of Sight and environmental interference.)

Note: This module is only compatible with Came Single Gimbals purchased after Nov 1st 2015.

SUPER CONVENIENT WHEN YOU WANT TO
REMOTELY CONTROL PAN AND TILT

 

unnamed-1unnamed-3

YOU MIGHT BE INTERESTED IN THESE OTHER GIMBALS

action unnamed-5 unnamed-4
CAME-ACTION Tool-less CAME-SINGLE Tool-less CAME-ARGO
Tool-less
The design of the CAME-Action allows for one handed smooth operation... The new CAME-SINGLE is one of the first 3 Axis 32 bit Basecam controlled... The new CAME-ARGO features 32 Bit Boards with brushless motors and Encoders....
read more read more read more

Related Posts:

•

After receiving his CAME-single, Andrew Gerard Media, went out and grabbed some quick test footage with his Sony A7Rii!

The CAME-Single gimbal is perfect for shooters who want a simple system thats easy to balance and provides steady footage. The encoders that are built into the brushless motors allow the CAME-Single to be extremely stable. The max payload that the CAME-Single can handle is about 2.6lbs(1.2kg), which is perfect for mirror-less cameras like the Sony A7S series, Panasonic GH4 and the Blackmagic Pocket Cinema Camera.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With EncodersFor more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

Related Posts:

•

Youtube user, Slashcam, recently uploaded two quick tests he did with the CAME-Single gimbal! Both videos use the CAME-Single, but with different camera setups. The first video uses a Sony A7SII with a FE 3.5-5.6 / 28-70 OSS lens and the second video uses a Panasonic GH4 with a Lumix G X Vario 12-35mm f/2.8 lens.
Each video uses the CAME-Single in different variations. One video focuses on how it performs while you follow a subject and the other video goes through the joystick movements, pan/tilts and holding the CAME-Single as you ride a bike. The CAME-Single is one of the first commercially available 3-axis 32-bit basecam controlled gimbals to offer brushless motors with Encoders.

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

Related Posts:

•

Introducing the brand new CAME-ARGO gimbal with encoders! The ARGO is a newly designed gimbal that is extremely lightweight, but is able to handle pretty heavy DSLR camera setups.
CAME-ARGO 3 Axis Gimbal Camera 32bit Boards With EncodersThe CAME-ARGO has a pre-calibrated 32-bit Alexmos control board and a max payload of about 3kg (6.6 lbs). The CAME-ARGO comes with a new foldable stand that will make it easier for you to balance and setup the gimbal, especially if you're on the go. As of right now, there is no exact date of when the ARGO will be available to purchase, but it will be soon!

CAME-ARGO 3 Axis Gimbal Camera 32bit Boards With Encoders

For more information on how to pre-order the new CAME-ARGO click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-ARGO 3 Axis Gimbal Camera 32bit Boards With Encoders

 

Related Posts:

•

Check out this test film by Ryoma Yoshimura that he shot entirely with the CAME-7800 gimbal! He used a Canon 5Dmk2 and a 60D with three different lenses - a Sigma 70-200 F.2.8, 25-105mm and a 50mm.
The CAME-7800 gimbal is a great gimbal if your camera setup is a little bit on the heavier side. With a max payload of about 6.5lbs(3kg), it can hold bigger DSLR cameras like the Canon 5D series or the Nikon cameras. The CAME-7800 has tool-less adjustment for the yaw and roll axis, making it easy to balance your camera.

CAME-7800 3 Axis Camera Gimbal

For more information on the CAME-7800 3-axis gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-7800 3 Axis Camera Gimbal

Related Posts:

•

Check out this video that Darryl Smith posted of him using the CAME-Single with a Panasonic and a Panasonic 8mm f/3.5 ED Fisheye lens!

Although, the video is mostly a test on how the Panasonic GH4 looks when the 4K is down converted to 1080, he does use the CAME-Single gimbal the whole time. The CAME-Single is made to hold camera setups that are no more than 2.6lbs(1.2kg). The encoders that are built into the brushless motors allow the gimbal to be extremely stable and use up less battery than needed. The CAME-Single can operate for up to 20 hours when it's fully charged.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

Related Posts:

•

Filmmaker, Tom Antos, recently used a Sony A7sii balanced on the CAME-Single gimbal to film this entire music video! The video follows singer, Anna Cyzon as she walks around the streets of New York. The CAME-Single is perfect for a project that requires a lot of tracking shots, especially if it takes place in crowded areas.

The CAME-Single is small enough to be carried around, but is also strong enough to handle a max payload of 2.6lbs. Tom Antos, also posted a quick making of the music video, which he uploaded the same time as the music video was released. It goes through the creative process and even shows why he decided to shoot the entire music video with the CAME-Single. Watch the making  below!

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

Related Posts:

•

Sean J Vincent, recently shared with us a teaser from a web series he worked on that used the CAME-Mini 2 gimbal! He shot it with a Panasonic GH4 and a G Vario 14-42mm lens.

Here's a short synopsis taken from the "Paradox" video description:

Shot at the end of the summer in Norfolk, this web series follows the adventures of a time traveller and the girl who rescues him... Why is he here? Where did the time machine come from? When is he from?
All will be revealed soon...

The web series was shot using a Panasonic GH4 and a Sony FS100. If you want a closer look of Sean J. Vincent's CAME-Mini 2 setup, check out this review on the Mini 2 he posted a few months ago while he was shooting "Paradox".

For more information on the CAME-Mini 2 Gimbal click below! Make sure to also sign up for the newsletter to receive updates and information on any new products we release. Also, be sure to check out the first episode of "Paradox" on December 22, 2015.

CAME-MINI 2 Camera Gimbal For A7S GH4 BMPCC

 

Related Posts: