THE CAME-SL04 IS AN ADJUSTABLE LENGTH SLIDER CONSTRUCTED OUT OF HIGH QUALITY ALUMINUM ALLOY
CHECK OUT OUR CAME-TV VIDEO SUCTION CUP
CAR MOUNT VIDEO
The design of the CAME-SINGLE allows for one hand operation. A 1/4 and 3/8 thread is located under the handle for mounting options. The internal rechargeable batteries are fitted inside the pistol grip handle and the built in Joystick can be used for controlling camera positions and for changing modes.
The Boltzen 55w Video Light includes an adjustable Fresnel lens to help focus the light and provide a longer throw. When used without the lens, the light becomes a wider flood and the included barn doors help to control the spill. This versatility allows you to go from a tight spot to a wide flood all in one continuous light.
The Boltzen 55 Watt video light shares the exact same housing as our Boltzen 30w Fresnel with the exception of a built in cooling fan to dissipate the extra heat. Our fan is barely audible at a distance of 1 meter. The CAME-TV Boltzen 55w Fresnel Video Light can be powered from AC (with included power adapter), NP Series battery or V-Mount battery via the included V-Mount adapter cable providing convenient use on set and on location.
The Magnetic Snap Kit has magnetics built into the face of it so that you can easily snap on the modifiers: grid, filter holder or diffuser. The modifiers can be used individually or stacked with the magnetic snap system allowing for a lot of creativity.
For more information on the CAME-TV 55w Boltzen Bi-Color Light or the Magnetic Snap Kit click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.
The CAME-TV RGBDT LED Lights can display Red, Green, Blue and can adjust to any color. By adding both Daylight and Tungsten LED's to the RGB LED we are able provide both 5600K (Daylight) and 3200K (Tungsten) while maintaining a high CRI. The RGBDT LED lights have 2 groups of LED's RGB and DT. For the color range of 3200K to 5600K the DT group of LED's will illuminate with a high CRI of 98.
The CAME-Optimus has a brand new frame design that allows the gimbal to be operated completely inverted or underslung.All motors on the Optimus can rotate a full 360 degrees without limitation for greater range and flexibility during operation.
(Shown with optional Tessera Adapter)
Here's another interview posted by, Newsshooter.com, from the recent IBC 2017 show in Amsterdam. This video goes over our new CAME-TV Prophet Gimbal and some of the accessories that we designed for it.
The CAME-Prophet is the successor to our very successful CAME-Argo gimbal. Both the Prophet and Argo are designed to support small to medium sized DSLRs with a maximum payload of 6.6 lbs (3 kg). However, while the Argo contains a dedicated 2-handed setup, the Prophet comes with a single handed pistol grip handle (similar to the CAME-Optimus), but with the option to use them with a variety of compatible two-handed accessories - including the Orbit-Two Ring Mount, Dual Handles and Tessera.
Our RGBDT lights have a new technology were we add Daylight and Tungsten LED's to the RGB LED. The RGB LED can display Red, Green and Blue. With these lights, when attempting to simulate Daylight or Tungsten the CRI value drops. By adding both Daylight and Tungsten LED's to the RGB LED we are able provide both 5600K (Daylight) and 3200K (Tungsten) while maintaining a high CRI.
The CAME-Action is one of the first commercially available 3 Axis 32 bit Basecam controlled gimbals to offer brushless motors with Encoders. Encoders are often used in Robotics for highly accurate monitoring of motor position. Some of the benefits of using Encoders are to: prevent motors from losing synchronization and skipping steps, provides important information about frame and camera angles, decreases power consumption (longer battery life), increases Torque, increases precision of stabilization, and more.