Tag Archives: came-7500

facebooktwitterpinterestfacebooktwitterpinterest

Service Modes are used to assign button clicks to various gimbal operations. On most CAME-TV gimbals, you can toggle between these different modes simply by clicking on the service button (or joystick) to operate them. By default, the first three modes are set as follows:

1 Click: Switch to Profile 1
2 Clicks: Switch to Profile 2
3 Clicks: Switch to Profile 3

To see how Profiles 1, 2, and 3 are configured, click here.

It's also a good idea to take advantage of your Service Modes by using the Profile 4 and Profile 5 options. These profiles should specifically be set to calibrate your sensors and gyro, respectively. These modes will especially come in handy when you're shooting out in the field and don't have access to your laptop to recalibrate your gimbal.

4 Clicks: Calibrate ACC (Calibrate sensors. Must hold camera and gimbal level and square when using this option)
5 Clicks: Calibrate Gyro (Calibrate Gyros. Must hold camera and gimbal level and square when using this option)

Download the SimpleBGC software here.

SAMPLE: Once you have Profiles 4 & 5 programmed and saved, you can now calibrate your sensors and gyros directly through the gimbal. (Demonstrated in video below with a CAME-Single, but the process applies to all CAME-TV gimbals when calibration modes have been programmed in them.)

Gimbal calibration demonstrated on CAME-Single and CAME-7800 gimbals below. (Process applies to all gimbals with service modes programmed in).

facebooktwitterpinterestfacebooktwitterpinterest

Currently the only gimbal that has the motor encoders is the CAME-Single. We may start to implement these encoders onto newer versions of our gimbals in the future.

facebooktwitterpinterestfacebooktwitterpinterest

3 Axis Gimbal Alexmos Board
For camera systems such as Canon 5D3, Canon 5D2, Canon 7D, Panasonic GH4, and Sony A7. 32-bit controller used for the construction of high quality 3-axis camera stabilizing systems.
Smooth Shots Handles
3 motors that stabilize along the pan, tilt, and roll axes. Two side handles for hand-held use and a top handle for low-angle shots or for transporting.

SUPPORTS LOADS UP TO 6.5 LBS AND INCLUDES
PRE-CALIBRATED 32-BIT ALEXMOS CONTROL BOARD

YOU MIGHT BE INTERESTED IN THESE OTHER GIMBALS

CAME-Single
With Encoders
CAME-8000
Tool-less
CAME-7800
Tool-less
One of the first commercially available 3 Axis 32 bit Basecam controlled gimbals to offer motors with Encoders .... A handheld stabilizer designed for camera systems weighing up to 11 pounds, making it suitable for... Designed for camera systems such as Canon 5D3, Canon 5D2, Canon 7D, Panasonic GH4, and Sony A7...
read more read more read more

facebooktwitterpinterestfacebooktwitterpinterest

@remycadier shooting with the#cametv #7500 #gimbal out of the sunroof of a car!

11312297_719486714827116_1161065358_n

For more information on the CAME 7500 Gimbal click below!

CAME-TV 7500 3-Axis Gimbal

facebooktwitterpinterestfacebooktwitterpinterest

@scottyray_satostudios getting that "sunset shot" with the #cametv #7500 #gimbal

11263600_1579070029047920_1072440290_n

For more information on the CAME 7500 Gimbal click below!

CAME-TV 7500 3-Axis Gimbal