The CAME-7500 is the older version of what is now the CAME-7800 3-axis gimbal. The 7500 gimbal required users to build the gimbal and required tools to balance the camera on the carriage. Now, most of the gimbals that we offer are tool-less, pre-built and some even have encoders built into the motor (CAME-Single & CAME-Action). The CAME-7800 is a good gimbal for setups that might be too heavy for the CAME-Mini 2 or the CAME-Single. We have a variety of gimbal models that can hold small action cameras(CAME-Action) or bigger setups like a Blackmagic Cinema Camera(CAME-8000).
Csproductions87, uploaded this wedding he shot using his Panasonic GH4 balanced on a CAME-7500 gimbal with a Rokinon 16mm Cine Lens. The video is a quick highlight video that follows bride and groom as they prepare for the ceremony.
Although, the CAME-7500 gimbal is discontinued, we advise that you check out the updated version of the 7500 - the CAME-7800. The CAME-7800 is based on the original CAME-7500, but it's completely upgraded and pre-assembled. The 7800 has upgraded; handles, quick release plate and is tool-less on the roll and YAW axis.
For more information on the CAME-7800 or any of the 3-axis gimbals we offer click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.
Brandon Lane, uploaded this test video that is mainly focused on how the Sony A7Sii Slog2 performs. In the video he decided to try it out by following his dogs with the CAME-Mini 2 gimbal.
The video is all in slo-mo using a Samyang 35mm Cine T1.5 and a Samyang 14mm T3.1 lens shot at 120fps. Brandon Lane, does state that he shot the whole video with the CAME-Mini 2 set to mode 1(Follow Mode). The CAME-Mini 2 is a tool-less 3 axis gimbal that is designed for smaller bodied cameras like the Panasonic GH4, BMPCC and/or the Sony A7Sii cameras. All of the wiring and electronics are completely enclosed into the frame, offering a clean professional appearance and to also protect the wiring.
The article is separated into multiple parts that include: the features, in use and the overall verdict of the CAME-ACTION. The CAME-ACTION is designed for the Hero 3, 3+ and 4 GoPro models, along with some other action cameras that have a similar body type. It's completely tool-less, which make using it a breeze, especially when you are in a rush. The encoders make it extremely stable and increases the battery life of the CAME-ACTION when its in use because it allows the gimbal to run on less power.
There are many solutions available that use a simple counterweight to stabilize the camera whilst you are moving it. However, for the sheer control that it is offered by the Came-Action 3-axis Gimbal it beats all of these device. - TheVideoMode.com
David Oastler, uploaded a video a few weeks ago that went over a majority of the details and specs of the CAME-Single gimbal. Recently, he shared this follow up video with us about using the CAME-Single on multiple wedding gigs he shot.
In the first half of the video, David Oastler gives a quick rundown of his personal experiences using the CAME-Single. In the second half of the video he provides some test footage from different weddings he shot where he used the CAME-Single to follow the bride and groom walking. The CAME-Single is great for cameras like the Panasonic GH4, Sony A7s/A7rII and/or the Blackmagic Pocket Cinema Camera. If you haven't seen David Oastler's first video, make sure you check it out below!
For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.
James Norden, posted this quick test of him using the CAME-Mini 2 gimbal! The video consist of James taking the Mini 2 gimbal out on the street and following someone.
He was able to balance his Sony A7RII with the Voigtländer 21mm f/1.8 lens. James Norden does state that his setup did exceed the max weight the Mini 2 can handle. The CAME-Mini 2 is a tool-less gimbal that provides the shooter with incredibly smooth footage. It's really easy to balance your camera on the gimbal and it only takes four rechargeable 18650 batteries.
"Overall I'm very impressed with the CAME Mini 2 - with the right lighter lens it will produce excellent results." - James Norden
Recently, Tom Antos, posted this detailed review of the CAME-Single 3-axis gimbal. He does state that he was using a Sony A7s with a big lens that might of exceeded the max payload the CAME-Single can handle, but it still worked well and gave him steady footage. In this video he demos the Single with a Sony NEX-5R.
Tom Antos, goes through great detail on what the CAME-Single comes with and how you would normally setup/balance it. The cool thing about the video is that he actually cuts in some "behind the scenes" footage of a recent shoot he worked on using the CAME-Single. The CAME-Single works great as a portable gimbal that you can easily bring around with you.
Laurent Briere, follows hundreds of youths and adults running in this marathon that has been going on for 28 years. The CAME-Single is lightweight enough for the shooter to run side by side with a subject as they run, walk or jog. The brushless motors with encoders make the CAME-Single gimbal extremely stable and efficient.
He follows the BB-8 using a BMPCC with a Zeiss 50mm F1.7 lens balanced on the CAME-Mini 2 gimbal. The video is just under :30 seconds, but it demonstrates how stable the Mini 2 gimbal can be when trying to follow a fast subject. The Mini 2 has a clean and professional appearance by having all the wiring internally, so that it won't get in the way as you shoot. It takes four rechargeable 18650 batteries, which slide into the horizontal cross bar.
Laurent BRIERE, posted this quick video of him filming some of his friends at a skatepark with his Panasonic GH4 and CAME-Single gimbal!
The CAME-Single is great for getting steady footage when you're shooting a scene that requires you to follow a subject that's continuously moving around. Laurent BRIERE, has posted a lot of videos in which he follows athletes as they compete in some form of competition. The CAME-Single is a 3-axis gimbal that's designed for you to use one-handed. The new encoder technology allows the CAME-Single to use less power, but also increase the overall stability.
Recently, Dieter Knüttel, finished his five part review on the CAME-Single gimbal and now he just posted his review on the new CAME-ACTION gimbal for the GoPro.
Dieter Knüttel, goes through all the specs for the CAME-ACTION including the different modes and everything that comes in the box. The last few minutes of the video show a bunch of test footage he shot using the CAME-ACTION. The CAME-ACTION is able to work with the GoPro Hero 4, 3 and 3+.
Lucent Productions, was able to take the CAME-ACTION gimbal out to the park with his kid and grab some quick test footage with his GoPro.
The CAME-ACTION is made for shooters who want to get some stable action shots with their GoPro camera. It runs on three rechargeable 16340 batteries , which are small, lightweight and portable. It's made of aluminum alloy and weighs in at 0.66 pounds without the camera and batteries. Since, we introduced the CAME-Single with new encoder technology, the CAME-ACTION also uses brushless motors with encoders, which will decrease the power consumption and increase the overall stability.
David Oastler, posted this detailed review of the CAME-Single 3-axis gimbal. He goes through the balancing process with his Sony A7s and toward the end of the video he shows some test footage that he captured while using the gimbal. (NOTE: David Oastler, does state that there was an audio problem with his mic).
The CAME-Single is a tool-less designed gimbal that is made for one-handed operation. The built in joystick allows you to pan and tilt your camera depending on your shot. To turn on the CAME-Single, you press and hold the button located on the side of the handle. To switch between the three different operating modes, you simple click the same button until the mode you want is selected.