Monthly Archives: October 2015

•

Youtube user, Juliarta Juliarta, recently uploaded this quick CAME-7800 3-Axis Gimbal test!

The CAME-7800 is a stabilizer that features two side handles for hand-held use and a top handle for low-angle shots. The CAME-7800 offers multiple operation modes, which you can cycle through by clicking on the joystick. You can choose to lock the camera in place along all three axes, have the camera smoothly follow your pan and tilt motions while keeping the horizon level or lock the tilt axis while allowing the camera to pan left and right.

CAME-7800 3-Axis Gimbal

For more information on the CAME-7800 3-Axis Gimbal click below!

came-7800 3-axis gimbal

 

Related Posts:

•

BBW Production, uploaded this short clip of him using the CAME-7800 3-axis gimbal on a recent music video shoot!
With a max payload of about 6.5lbs, the CAME-7800 is designed to hold heavier DSLR type cameras like a Canon 5Dmk2 or 5Dmk3. The CAME-7800 uses three motors that stabilize the pan, tilt and roll axis, which will compensate for shakes and unwanted vibrations. Quick release knobs have been added to the CAME-7800, making the roll and yaw axis tool-less for easier balancing.

CAME-7800 3-Axis Gimbal

For more information on the CAME-7800 3-Axis Gimbal click below!

CAME-7800 3-Axis gimbal

Related Posts:

•

jpeg

Encoders Tool-less
This technology prevent motors from losing synchronization, skipping steps and more. Quick and easy to Balance + Quick Release Camera Plate System
Design Battery Life
The design of the CAME-SINGLE allows for one hand operation. Batteries can operate up 10 hours when fully charged.

ENCODERS ARE OFTEN USED IN ROBOTICS FOR HIGHLY ACCURATE MONITORING OF MOTOR POSITION

single

CAME Single Test By Scotty Ray

The hike to Half Dome in Yosemite takes several hours and requires us to travel light. I chose the CAME-Single over other gimbals because of its size and reliability. It does everything I need and fits inside my normal DSLR bag. For the video, I used a Sony A7s with a Sony 16-35 Zeiss version lens. The video was shot in one day which took about 14 hours without having to charge the CAME-Single. Battery life was incredible. Scotty Ray.

jpeg

YOU MIGHT BE INTERESTED IN THESE OTHER GIMBALS

action mini2 8000
CAME-ACTION Tool-less CAME-MINI 2 Tool-less CAME-8000 Tool-less
The new CAME-SINGLE is one of the first commercially available 3 Axis 32 bit Basecam controlled... The new MINI2 is completely tool-less which allows the operator to change camera setups.... A handheld stabilizer designed for camera systems weighing up to 11 pounds, making it suitable for...
read more read more read more

Related Posts:

•

Vimeo user, De Rienzo Films, posted this compilation video of different shots from a wedding they shot with the CAME-Single!
The CAME-Single is a 3-axis 32-bit basecam controlled gimbal that offers brushless motors with encoders. The batteries for the CAME-Single are now completely internal and on a full charge can last about 20 hours. The large frame gives the shooter the ability to fully tilt up and down without the camera hitting the gimbal. With a 1.2kg max payload, the CAME-Single is perfect for your mirror-less cameras like the Sony A7s, Panasonic GH4 or the BMPCC.

CAME-Single 3-Axis Gimbal

For more information on the CAME-Single Gimbal click below!

CAME-Single 3-Axis Gimbal

Related Posts:

•

MrCheesycam, recently uploaded this detailed review on the new CAME-Action Gimbal for the GoPro!

The brand new CAME-Action Gimbal is made solely for the GoPro Hero 3, 3+ and 4. Like the CAME-Single, the CAME-Action is a 3-axis gimbal that has brushless motors with encoders. The CAME-Action is extremely lightweight - weighing in about 300 grams(0.66 pounds) without the camera and batteries. It comes with a durable carrying case that the gimbal fits nicely into.

CAME-Action Gimbal For The GoPro

 

For more information on the CAME-Action Gimbal For The GoPro click below!

CAME-Action Gimbal For The GoPro

Related Posts:

•

Thevideomode.com, posted a detailed article about the CAME-Single and the experiences they had with it. In the video, he demos the CAME-Single with his BMPCC and Lumix 7-14mm kens.  In addition to the article, they also uploaded a video review and shot a quick test film that was shot entirely with the CAME-Single. Make sure you check out the full article here!

REVIEW:

The CAME-Single is a 3-axis handheld gimbal that has encoders built into the brushless motors. The new updated version has internal batteries, which increases the battery life for up to 20 hours. The CAME-Single Gimbal is designed to hold small mirror-less cameras like the GH4, A7s or the Blackmagic Pocket Cinema Camera.

TEST FILM:

For information on the CAME-Single 3-Axis Gimbal click below!

came-single 3-axis gimbal with encoders

Related Posts:

•

Leopold Hotz, recently used the CAME-Mini2 Gimbal to film a talented biker cruising through some parks! It was filmed using a Panasonic GH-4 with the Panasonic 12-35mm lens.

The CAME-Mini2 is completely tool-less, allowing the shooter to balance and change camera setups quickly. A quick release system has been added, making it easier to remove or insert your camera onto the Mini2 Gimbal. All the wires are completely enclosed into the frame, so that the wires won't be in the way as you shoot.

CAME-Mini 2 3-Axis Gimbal

For more information on the CAME-Mini2 3-Axis Gimbal click below!

CAME-Mini2 3-Axis Gimbal

Related Posts:

•

YOU4REEL.com, posted this quick video that was shot with one of our CAME-TV Gimbals showing the Coty Showcase in Dublin's Georgian building!

The CAME-TV Gimbals are completely 3-Axis and are designed to get shots that look fluid. There are different types of CAME-TV Gimbals that can support a wide range of cameras - from mirror-less cameras to more heavy duty cameras like the Blackmagic Cinema Camera. Recently, the new CAME-Action Gimbal was just announced, which is designed solely for GoPro cameras.

For more information on all the CAME-TV Gimbals that we offer click below!

CAME-TV Gimbal 7800 3-Axis

Related Posts:

•

Vimeo user, Remo Chapeaublanc, uploaded this quick video of him testing out the CAME-Single Gimbal for the first time with his Sony A7RII and 16mm F/2.8 lens.
The size of the CAME-Single is perfect for mirror-less cameras like the GH4, A7s and A7RII. The quick release plate on the CAME-Single is completely tool-less making balancing your camera on the gimbal a breeze. Due to the encoder technology on the CAME-Single, stabilization is more precise and information about the frame and camera angles are more accurate.

CAME-Single 3-Axis Gimbal

For more information on the CAME-Single 3-Axis Gimbal click below.

CAME-Single 3-Axis Gimbal

Related Posts: