My Gimbal Won’t Operate When USB Connected to Software

facebooktwitterpinterestfacebooktwitterpinterest

When connecting the Gimbal via USB to the software, sometimes you may find the motors do not operate when you power the entire system On. The problem may be a setting in the software that temporarily disables the Motors. This setting is used when you are working on the gimbal, and need to change settings without powering the system off or disconnecting.

To turn the motors back on, click on the Motors ON/OFF Button located at the lower left of the SimpleBGC Application Screen.

SimpleBGC Motors On OFF Button

If your system is powered on and connected to the Software, this button will toggle power to the Motors On or OFF.