Tag Archives: 360 degree rotation

We were luck enough to have the Gear Addix crew pass by our booth and film a little interview on some of the CAME-TV Gimbals that we showcased at the 2016 Cine Gear Expo!

The size of the CAME-Single is perfect for mirror-less cameras such as the Panasonic GH4, Sony A7s | A7RII, and BlackMagic Pocket Cinema Cameras. The encoders on the CAME-Single prevent motors from losing synchronization, provides important information about frame and camera angles, decreases power consumption (longer battery life), increases Torque and precision of stabilization.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders
(CAME-Single W/ Dual Handles)

The Optimus model also features encoders and allows for one hand operation, but with all of the controls and battery now relocated outside of the handle, the single handle can be changed to Dual Handles depending on the camera operator's requirement.  All motors rotate a full 360 degrees without limitation for greater range and flexibility during operation.

CAME-OPTIMUS 3 Axis Gimbal Camera 32bit Boards With Encoders
(CAME-Optimus)

The CAME-Mini 3 is our latest edition to the CAME-MINI Gimbal Series. The new Mini 3 uses basecam 32 bit controllers with encoders. All of the wiring and electronics are completely enclosed into the frame, offering a clean professional appearance and protecting the wiring.

CAME-Mini 3 3-Axis Gimbal Camera 32bit Boards With Encoders
(CAME-Mini 3)

For more information on our entire CAME-TV Gimbal line click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

came-optimus_07

 

Vimeo user, Dieter Knüttel uploaded his first test video on the new CAME-Optimus 3-axis gimbal! He filmed it with the Panasonic GH4 and Lumix 12-35mm lens. Dieter, does state in the description of the video that the shaky part at 0:52 seconds is due to his hand touching the seat and not a caused by the Optimus.

The CAME-Optimus is the successor to our very successful CAME-Single gimbal. The Optimus model also features encoders and allows for one hand operation, but with all of the controls and battery now relocated outside of the handle, the single handle can be changed to Dual Handles depending on the camera operator's requirement.  All motors rotate a full 360 degrees without limitation for greater range and flexibility during operation.

CAME-OPTIMUS 3 Axis Gimbal Camera 32bit Boards With Encoders

 

For more information on the CAME-TV Optimus gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-OPTIMUS 3 Axis Gimbal Camera 32bit Boards With Encoders