Tag Archives: came-tv argo

facebooktwitterpinterestfacebooktwitterpinterest

Owners of our CAME-Argo and Mini 3 might have noticed something different in each gimbal's battery configuration. We are now using a battery case that has 18650 LiPo batteries allowing you to remove them, charge them and immediately replace them with a backup set of fully charged 18650 LiPo batteries that you might have on standby. This allows you to keep cycling through numerous sets of batteries for an extended gimbal run time.

As with all LiPo batteries it is never good to over-discharge the battery. Over-discharge is when a battery cell voltage drops below the level of circuit protection limit. Once a LiPo battery is over-discharged, it is more than likely that it cannot be recharged and new one would have to be purchased.

We strongly recommend that when the gimbal is not in use or is in storage, to remove the 18650 LiPo batteries from the battery case. Failure to do so can result in over-discharge of the battery/batteries.

YouTube Reviewer MrCheesycam gives us a thorough breakdown of the updated battery packs in the video below:

facebooktwitterpinterestfacebooktwitterpinterest

@rlcreativevisuals' new #cametv #argo #gimbal setup with his #Sony #A7s! #CameGimbal #ArgoGimbal #Camegimbalsnap5 #argosnap3 #CameArgo #SonyA7s #CametvArgo - Level up :) #cametv #cameargo #Regrann via Instagram https://www.instagram.com/p/BJLwpL1BmeG/

facebooktwitterpinterestfacebooktwitterpinterest

facebooktwitterpinterestfacebooktwitterpinterest

Tom Antos, recently uploaded this detailed review on our CAME-ARGO Gimbal! Along with his overall impressions of the ARGO, he added some example footage he shot with the Canon 7D.

The CAME-ARGO features a 32-bit Alexmos Board and is completely tool-less for easy balancing. All of the motors are equipped with encoders, making the performance more smooth and accurate. The handle comes with a monitor mount and a wireless remote, which allows you to remotely control the gimbal and switch between modes. The entire top handle bar can be easily separated from the gimbal, allowing the ARGO to be mounted to other devices like a crane, slider or drone with the included adapter plate.

CAME-TV ARGO 3-Axis Gimbal

For more information on the CAME-ARGO click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV ARGO 3-Axis Gimbal

 

facebooktwitterpinterestfacebooktwitterpinterest

Awesome #cametv #Argo #gimbal setup by @uturncrossfit for his #Sony #A7sII! #CameArgo #CameGimbal #SonyA7sii #argosnap3 - NERD ALERT..... #whattofilmnext #utcf #uturncrossfit #crossfit #sonya7sii #cametv #workout #motivation #fitness #community #recordeverything #video #somuchtolearn #kindofheavy #myclan #findahobby #rokinon #35mm #smallhd502 #makeitfun #whatsmygoodsideagain #Regrann via Instagram https://www.instagram.com/p/BHnnLKohkvQ/

facebooktwitterpinterestfacebooktwitterpinterest

Can't wait to see some of the test footage that @tom_antos filmed with our #cametv #argo #gimbal! #CameArgo #CameGimbal #argosnap3 - Argo camera gimbal from @cametv is next up for testing #Regrann via Instagram https://www.instagram.com/p/BHky7mLhYFg/

facebooktwitterpinterestfacebooktwitterpinterest

CREATIVE Team, recently uploaded their second test video on the CAME-TV ARGO gimbal! The video was shot with the Canon 5DmkIII with three different lenses; the Canon 24-105mm, 50mm and 18-200mm!
The CAME-ARGO features a 32 bit Alexmos Board and is completely tool-less, making balancing your camera setup easy and quick. All of the motors are equipped with encoders, which makes the ARGO's performance more smooth and accurate, along with increasing the lifespan of the battery.

CAME-ARGO 3 Axis Gimbal Camera 32bit Boards With Encoders

For more information on the CAME-ARGO click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-ARGO 3 Axis Gimbal Camera 32bit Boards With Encoders

 

 

facebooktwitterpinterestfacebooktwitterpinterest

Printable instruction manuals for our most popular CAME-TV gimbals can be viewed and downloaded below:

 
CAME-Prophet Manual
 
CAME-Spry Manual
 
CAME-Prodigy Manual
 
CAME-Optimus Manual
 
CAME-Argo Manual
 
CAME-Mini 3 Manual
 
CAME-Single Manual

facebooktwitterpinterestfacebooktwitterpinterest

@nastaydrek just received his brand new #cametv #argo #gimbal! Thanks for the support! #CameGimbal #CameArgo #argosnap3 - Just received my new #cametv Argo 3 axis gimbal!! - let's go film #production #innovativemotion #cametvargo #gimbal #Regrann via Instagram https://www.instagram.com/p/BHBNuXzB732/

facebooktwitterpinterestfacebooktwitterpinterest

@joswin's #cametv #argo #gimbal setup with his #Sony #A7s! #CameGimbal #CameArgo #SonyA7s •••
Just got this baby in the mail. Can't wait to film some dope stuff with it! 💪🏼 via Instagram https://www.instagram.com/p/BG7lfPEB1sQ/

facebooktwitterpinterestfacebooktwitterpinterest

BTS of a shot using the #cametv #argo #gimbal that required some teamwork! Pic by @gabortokodidotcom #sony #a7sii #SonyA7sii ・・・
like in the eurovision bts.
www.gabortokodi.com
#sony #sonya7s2 #sonya7sii #sonya7sm2 #cametv #eurovision #gimbal via Instagram https://www.instagram.com/p/BGF7O_xB1sq/

facebooktwitterpinterestfacebooktwitterpinterest

Vimeo user, BlackStunt Prod uploaded his latest demo reel that showcases a bunch of his most recent work. Most of the tracking shots that are in the demo reel were shot with the CAME-TV ARGO Gimbal!

BlackStunt Prod, filmed his projects with the Canon 70D with multiple lenses: the Canon 10-22mm, Canon 50mm f1.8 and a the Canon 24-70mm f2.8. He does mention that he also used a handheld stabilizer for some of the other shots. The CAME-ARGO features a 32 bit Alexmos board and is completely tool-less. All of the motors are equipped with encoders, which increases the overall performance of the ARGO and makes the battery last a lot longer.CAME-TV ARGO 3-Axis Gimbal

The entire top handle bar can easily be separated from the gimbal, which than can be mounted to other devices like a crane, slider or drone with the included adapter plate.

For more information on the CAME-ARGO click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV ARGO 3-Axis Gimbal

 

facebooktwitterpinterestfacebooktwitterpinterest

HDVideoshop Berlin, uploaded this quick overview video of our CAME-TV ARGO Gimbal. The video shows the quick balancing process and also includes some sample footage. They used the ARGO with the Sony A7S camera.

The CAME-ARGO features a 32 bit Alexmos board and is completely tool-less. All of the motors are equipped with encoders, which makes the performance much more smooth and accurate - also, increasing the lifespan of the battery. On the bottom of the ARGO there's a video transmitter along with a D-Tap out, which can power accessories like a wireless follow focus.
CAME-TV ARGO Gimbal

 

 

For more information on the CAME-ARGO click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV ARGO Gimbal

facebooktwitterpinterestfacebooktwitterpinterest

@gabortokodidotcom doing some outdoor shooting with his #cametv #argo #gimbal and #Canon #5dmarkiii!
・・・
www.gabortokodi.com
#cametv #canon #canon5dmarkiii #canon6d via Instagram http://ift.tt/1N3Woch

facebooktwitterpinterestfacebooktwitterpinterest

@feynsinn.design filming on location with his #cametv #argo #gimbal and #canon #5dmarkiii!
・・・
In and out of the sewage today whilst filming, got to wear this pretty sweet suit 😉 #feynsinn #gimbal #cametv #business #film via Instagram http://ift.tt/24kYfOd