A little bit ago Vimeo user, Tommy Films, uploaded his first cut of the "Transilvania Drag Race" video he filmed. Now, you can check out his second cut of the video which he shot with the CAME-ARGO gimbal paired with his Canon 700D & Canon 17-85mm lens!
The CAME-ARGO features a 32 bit Alexmos board and is completely tool-less. All of the motors are equipped with encoders, which increases the overall performance of the ARGO and makes the battery last a lot longer. If you haven't seen his first cut of the "Transilvania Drag Race" watch it below!
Looking for snow #untaggable #q2 #winter #xmas #gimbal #cametv #audi #autoworld #automotive #canon @eblogauto.ro @autoworld.audi @clau.morar @vhoratiu via Instagram https://www.instagram.com/p/BN_HZlIBA7Q/
All of the motors on the ARGO are equipped with encoders, which makes the ARGO's performance much more smooth and accurate along with increasing the lifespan of the battery. The entire top handle bar can be easily separated from the gimbal, allowing the ARGO to be mounted to other devices like a crane, slider or drone with the included adapter plate.The ARGO can hold setups that don't exceed the max payload of about 6.6 lbs, making it great for DSLR camera setups.
#cametv #optimus #cametvoptimus #gimbal #canon #eosm #canoneosm #15mmfisheye #fisheye #bestlight #led #feelworld #hdmonitor #stayfocusedmedia #hirestayfocused #hiresf #videographer
@feelworld_monitor #Regrann via Instagram https://www.instagram.com/p/BKEf3sMh3j0/
#cametv #3axisgimbal #optimus #encoders #canon #eosm #canoneosm #teamcanon #fisheye #fisheyelens #minitripod
@cametv #Regrann via Instagram https://www.instagram.com/p/BIlPqa-BV2L/
Tom Antos, recently uploaded this detailed review on our CAME-ARGO Gimbal! Along with his overall impressions of the ARGO, he added some example footage he shot with the Canon 7D.
The CAME-ARGO features a 32-bit Alexmos Board and is completely tool-less for easy balancing. All of the motors are equipped with encoders, making the performance more smooth and accurate. The handle comes with a monitor mount and a wireless remote, which allows you to remotely control the gimbal and switch between modes. The entire top handle bar can be easily separated from the gimbal, allowing the ARGO to be mounted to other devices like a crane, slider or drone with the included adapter plate.
CREATIVE Team, recently uploaded their second test video on the CAME-TV ARGO gimbal! The video was shot with the Canon 5DmkIII with three different lenses; the Canon 24-105mm, 50mm and 18-200mm!
The CAME-ARGO features a 32 bit Alexmos Board and is completely tool-less, making balancing your camera setup easy and quick. All of the motors are equipped with encoders, which makes the ARGO's performance more smooth and accurate, along with increasing the lifespan of the battery.
Youtube user, StabilizerNews uploaded this short film that follows a mountain biker as he goes for a ride through the woods. Except for the drone shots, the short was filmed mostly with the CAME-TV ARGO gimbal! He used the Canon 5DmkIII with two different lenses - the Canon 16-35mm & the Rokinon 35mm.
The CAME-ARGO features a 32 bit Alexmos Board and is completely tool-less. All of the motors are equipped with encoders, making the performance much more smooth and accurate while also increasing the lifespan of the battery. On the bottom of the ARGO's frame, there's a video transmitter along with a D-Tap out, which you can power an accessory like a wireless follow focus.
Youtube user, Scotty Ray uploaded this wonderfully shot backpacking video that documents his hike up to Clouds Rest in the famous Yosemite National Park. He filmed the video with the CAME-TV 7800 and Sony A7s. The two lenses he used was the Rokinon 14mm and the Zeiss 24-70mm.
The CAME-7800 3-Axis Camera Gimbal from CAME-TV is a handheld stabilizer designed for camera systems such as Canon 5Dmk3, Canon 5Dmk2, Canon 7D, Panasonic GH4, and Sony A7. It utilizes three motors that stabilize the camera along the pan, tilt, and roll axes. The CAME-7800 features a clean design that hides all of the wires. As with most sled-style stabilizers, your camera needs to be properly balanced in order to get the best performance out of the gimbal.
Although, the CAME-TV 7800 gimbal is currently sold out, we urge you to check out all our other gimbals like the CAME-TV ARGO, CAME-Single and CAME-Mini 3. Click the image below to see a list of all the gimbals we offer. Make sure to also sign up for our newsletter to receive updates and information on any new products we release.