Tag Archives: mini

facebooktwitterpinterestfacebooktwitterpinterest

facebooktwitterpinterestfacebooktwitterpinterest

All setup and ready to shoot! Photo by @jumpman.shoots! #cametv #mini3 #gimbal #Sony #a6000 #minisnap3 #Camegimbalsnap5 #CameMini3 #CameGimbal
- If you know what this is, then you know what time it is. 📷📹🎥💯Video work on the way! #camemini3 #sonya6000 #sonyalpha #cametv #Regrann via Instagram https://www.instagram.com/p/BH3OmKdhVe5/

facebooktwitterpinterestfacebooktwitterpinterest

@maxsyder out filming with his #OlympusOMD & #cametv #mini #gimbal! #CameMini #CameGimbal #minisnap1 #Olympus - Rad time filming and shooting with @johnslugg today. #longboard #gimbal #cametv #Regrann via Instagram https://www.instagram.com/p/BHyNndYhowj/

facebooktwitterpinterestfacebooktwitterpinterest

Lightweight #cametv #mini #gimbal setup paired with the #Panasonic #G7! Pic by @nostalgicvis #CameGimbal #CameMini #minisnap1 #PanasonicG7
- Here's to my new arm workout 🙏🏼 Panasonic G7 + Came Mini Gimbal #Regrann via Instagram https://www.instagram.com/p/BHvGEvNh-Wb/

facebooktwitterpinterestfacebooktwitterpinterest

We were luck enough to have the Gear Addix crew pass by our booth and film a little interview on some of the CAME-TV Gimbals that we showcased at the 2016 Cine Gear Expo!

The size of the CAME-Single is perfect for mirror-less cameras such as the Panasonic GH4, Sony A7s | A7RII, and BlackMagic Pocket Cinema Cameras. The encoders on the CAME-Single prevent motors from losing synchronization, provides important information about frame and camera angles, decreases power consumption (longer battery life), increases Torque and precision of stabilization.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders
(CAME-Single W/ Dual Handles)

The Optimus model also features encoders and allows for one hand operation, but with all of the controls and battery now relocated outside of the handle, the single handle can be changed to Dual Handles depending on the camera operator's requirement.  All motors rotate a full 360 degrees without limitation for greater range and flexibility during operation.

CAME-OPTIMUS 3 Axis Gimbal Camera 32bit Boards With Encoders
(CAME-Optimus)

The CAME-Mini 3 is our latest edition to the CAME-MINI Gimbal Series. The new Mini 3 uses basecam 32 bit controllers with encoders. All of the wiring and electronics are completely enclosed into the frame, offering a clean professional appearance and protecting the wiring.

CAME-Mini 3 3-Axis Gimbal Camera 32bit Boards With Encoders
(CAME-Mini 3)

For more information on our entire CAME-TV Gimbal line click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

came-optimus_07

 

facebooktwitterpinterestfacebooktwitterpinterest

@maxsyder filming with his #cametv #mini #gimbal & #OlympusOMD camera! #CameGimbal #CameMini #minisnap1 #Olympus - Almost forgot I owned a gimbal. #gimbal #Subaru #wrx #sti #brz #filmmaking #Regrann via Instagram https://www.instagram.com/p/BHQSLP2BY8_/

facebooktwitterpinterestfacebooktwitterpinterest

unnamed

OUR BLACKMAGIC URSA MINI SHOULDER RIG IS DESIGNED TO WORK WITH THE URSA MINI

unnamed (1)

YOU MIGHT BE INTERESTED IN THESE OTHER GIMBALS

CAME-TV Prodigy 3-Axis Gimbal CAME-TV Mini 3 3-Axis Gimbal CAME-TV ARGO 3-Axis Gimbal
CAME-Prodigy
Tool-less
CAME-Mini 3
Tool-less
CAME-Argo
Tool-less
The CAME-PRODIGY gimbal is the physically largest of our gimbal family..... 32 Bit Boards with brushless motors and Encoders with a 5.8G video transmitter... The CAME-ARGO is completely tool-less which allows the operator to change camera setups....
read more read more read more

facebooktwitterpinterestfacebooktwitterpinterest

@diiviinemedia giving his #cametv #mini2 #gimbal a break from shooting! #CameGimbal #CameMini2 ••• Video dropping soon. 🕰🎥#diiviinemedia #Regrann via Instagram https://www.instagram.com/p/BGfHBhMB1nc/

facebooktwitterpinterestfacebooktwitterpinterest

CAME-TV Blackmagic Ursa Mini Shoulder Rig

OUR BLACKMAGIC URSA MINI SHOULDER RIG IS DESIGNED TO WORK WITH THE URSA MINI

CAME-TV Blackmagic Ursa Mini Shoulder Rig

YOU MIGHT BE INTERESTED IN THESE OTHER GIMBALS

CAME-TV Prodigy 3-Axis Gimbal CAME-TV Mini 3 3-Axis Gimbal CAME-TV ARGO 3-Axis Gimbal
CAME-Prodigy
Tool-less
CAME-Mini 3
Tool-less
CAME-Argo
Tool-less
The CAME-PRODIGY gimbal is the physically largest of our gimbal family..... 32 Bit Boards with brushless motors and Encoders with a 5.8G video transmitter... The CAME-ARGO is completely tool-less which allows the operator to change camera setups....
read more read more read more

facebooktwitterpinterestfacebooktwitterpinterest

@maxsyder shooting a promo video with his #cametv #mini #gimbal and #OlympusOMD with an #Olympus 12-50mm lens!
・・・
Getting shots to make an example of a promotional video. #filming #filmmaking #olympus #gimbal #subaru #wrx #sti #brz via Instagram http://ift.tt/1oZhXyX

facebooktwitterpinterestfacebooktwitterpinterest

@briceavril prepping all his gear including a #cametv #mini #gimbal and #Sony #A7 for a music video shoot!
・・・
Prep #a7 #sony #cametv #lightpanel #behindthescenes #filmmakers #musicvideoshoot #sonya7 #sonyalpha via Instagram http://ift.tt/1UDozkW

facebooktwitterpinterestfacebooktwitterpinterest

CAME-TV Mini 3 3-Axis Gimbal

Features:

Motor encoders which increases battery life and prevents the motors from skipping steps.
Smart Battery for longer run time and quick installation.
Remote joystick to control pan and tilt of the camera and also switch through different profiles.
Removable side handles for easy storage and transportation.
5.8G video transmitter below the camera baseplate.

PRE-ORDER SPECIAL ON CAME MINI3
SAVE $200 BY PRE-ORDERING

CAME-TV Mini 3 3-Axis Gimbal

PRE-ORDER SPECIAL ON CAME MINI3 AIR
SAVE $200 BY PRE-ORDERING

CAME-TV Mini 3 AIR

YOU MIGHT BE INTERESTED IN THESE OTHER GIMBALS

action unnamed-5 CAME-TV ARGO 3-Axis Gimbal
CAME-ACTION Tool-less CAME-SINGLE Tool-less CAME-ARGOTool-less
The design of the CAME-Action allows for one handed smooth operation... The new CAME-SINGLE is one of the first 3 Axis 32 bit Basecam controlled... The CAME-ARGO is completely tool-less which allows the operator to change camera setups....
read more read more read more

facebooktwitterpinterestfacebooktwitterpinterest

Quick clip of a #bmx video that @nailtimvideo shot with the #cametv #mini #gimbal and his #sony #rx10

facebooktwitterpinterestfacebooktwitterpinterest

@maxsyder doing some filming with his #cametv #mini #gimbal and #olympusomd camera with a #olympus17mm lens! via Instagram http://ift.tt/1QwK7My

facebooktwitterpinterestfacebooktwitterpinterest

@maxsyder's #cametv #mini #gimbal is back and ready to get used! Already setup for some filming with his #olympusomd and #olympus17mm
Lens! ・・・
Happy to finally have the gimbal back from the company. Had to send it back for repairs after there was an internal problem and it started to smoke. Excited to get back to filming. #gimbal #olympus #filmmaking via Instagram http://ift.tt/1peehKz