Kristoffer Davidsson, uploaded this recap video of the "Stockholm Stairs" competition that he shot with the CAME-Mini 2. He used two different cameras to film with the Mini 2: the Sony A7sII and the Sony a6300.
Compared to our original CAME-Mini 1, the Mini-2 is completely tool-less which allows the operator to change camera setups and re-balance the entire system quickly. A quick release system has been added on the Mini-2 for faster access to remove and install your camera onto the Mini-2 gimbal frame. All of the wiring and electronics are completely enclosed into the frame offering a clean professional appearance and to protect the wiring.
For more information on the CAME-Mini 2 Gimbal click below! Make sure to also sign up for the newsletter to receive updates and information on any new products we release.
OUR BLACKMAGIC URSA MINI SHOULDER RIG IS DESIGNED TO WORK WITH THE URSA MINI
YOU MIGHT BE INTERESTED IN THESE OTHER GIMBALS
 |
 |
 |
| CAME-Prodigy Tool-less |
CAME-Mini 3 Tool-less |
CAME-Argo Tool-less |
| The CAME-PRODIGY gimbal is the physically largest of our gimbal family..... | 32 Bit Boards with brushless motors and Encoders with a 5.8G video transmitter... | The CAME-ARGO is completely tool-less which allows the operator to change camera setups.... |
 |
|
|
Beau Reviews, uploaded this detailed review on our CAME-TV Single Gimbal. He talks about the specs, his personal views and even included some side by side footage of the Single in use!
The CAME-Single has a quick release camera plate and is completely tool-less, for easy and fast camera balancing. The size of the CAME-Single is perfect for mirror-less cameras such as the Panasonic GH4, Sony A7s | A7RII, and BlackMagic Pocket Cinema Cameras. Some of the benefits of the encoders are to: prevent motors from losing synchronization/skipping steps, provides important information about frame/camera angles, decreases power consumption (longer battery life), increases Torque and increases the precision of stabilization.
For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.
Briazi N Gongj, uploaded this boot camp video that was filmed entirely with his CAME-TV Single Gimbal and Canon 70D with a Canon 10-18mm lens. His setup weighed in at about 2.1 lbs, which is barely reaching the 2.6 lbs max payload!
The design of the CAME-Single allows the shooter to use it with just on hand. A 1/4-20" and 3/8" thread is located under the handle for mounting options. The Single's internal batteries are fitted inside the pistol grip handle and the built in Joystick can be used for controlling camera positions and changing modes. The Dual Gimbal Handles provide gimbal operators smooth camera panning and tilt motions. The tool-less adjustment of the handles provide easy configuration of the desired operating angle and spacing.
For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.
