Blog

facebooktwitterpinterestfacebooktwitterpinterest

Vimeo user, Luigi De Vita, uploaded this short clip of a video he shot using the CAME-Single gimbal and his Sony A7SII camera + a Sony zeiss 24-70mm f4 lens.

In the video, the CAME-Single is used for tracking the subject as he walks toward the van before ultimately getting in it. The van then drives off and we slowly follow as it starts to leave the parking garage. With a max payload of 2.6 lbs, the CAME-Single is designed to be portable, easy to balance and used with just one-hand. The encoders on the CAME-Single enhances the gimbals performance by preventing the motors from losing sync, increasing the torque/stability and decreasing the power consumption - allowing the gimbal to last longer.

CAME-TV Single Gimbal

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV Single Gimbal

 

facebooktwitterpinterestfacebooktwitterpinterest

CAME-TV ARGO

A HANDHELD 3-AXIS STABILIZED GIMBAL SYSTEM

CAME-TV ARGO CAME-TV ARGO

YOU MIGHT BE INTERESTED IN THESE OTHER GIMBALS

action unnamed-5 mini2
CAME-ACTION Tool-less CAME-SINGLE Tool-less CAME-MINI 2 Tool-less
The design of the CAME-Action allows for one handed smooth operation... The new CAME-SINGLE is one of the first 3 Axis 32 bit Basecam controlled... The new MINI2 is completely tool-less which allows the operator to change camera setups....
read more read more read more

facebooktwitterpinterestfacebooktwitterpinterest

With the growing popularity of these two Sony cameras, a sturdy and reliable rig is a must have. Our Sony FS5 Rig gives you all the essentials you would need to deck out your camera. It has a shoulder pad, a wooden top handle and the top and bottom baseplates have options to mount 15mm rods.

CAME-TV FS5 Camera Rig

Our Sony FS7 Rig is basically three main pieces that can easily attach together to form one solid piece. The FS7 Rig is covered in mounting points, allowing the shooter to attach a bunch of accessories to the top plate, side plate and even the top handle. Like the FS5 Rig, you have the option to attach a pair of 15mm rods to the top and bottom plates.

CAME-TV FS7 Camera Rig

If you haven't check out this review on the Sony FS7 Rig by Satostudiogear make sure you check it out.

For more information on the CAME-TV FS5 Rig and the CAME-TV FS7 Rig click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV FS5 Camera Rig CAME-TV FS7 Camera Rig

 

facebooktwitterpinterestfacebooktwitterpinterest

Vimeo user, Simon Shasha, was lucky enough to be chosen by Blackmagic to test their Blackmagic Micro Cinema Camera before it hits the shelves. The video is beautifully shot and Simon, actually used two CAME-TV products to shoot the video - the CAME-Single and the new CAME-TV Blackmagic Micro Cinema Camera Cage plus a Lumix 12-35mm lens.

The CAME-Single is a 3-axis gimbal that is designed to be portable and extremely steady due to the new encoder technology that has been implemented on the gimbal. It's completely tool-less, making it easy to balance and has a max payload of about 2.6 lbs. Simon, was also kind enough to post some pictures of his setup with the CAME-Single and the BMMCC.

CAME-TV Single With Blackmagic Micro Cinema Camera

The newly designed CAME-TV BMMCC Cage is made to fit the new Blackmagic Micro Cinema Camera perfectly. All the buttons on the BMMCC are all easily accessible and it comes with a 15mm rod system. Not only does it come with a solid top handle, but it also comes with a wooden side handle that makes it more comfortable to hold. Take a look at his setup with the CAME-TV BMMCC Cage.

CAME-TV Blackmagic Micro Cinema Camera Cage With BMMCC

For more information on the CAME-Single gimbal and the CAME-TV BMMCC Cage click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With EncodersCAME-TV Blackmagic Micro Cinema Camera Cage

facebooktwitterpinterestfacebooktwitterpinterest

Kyle SHOX Brown FILMS, posted this promo video of the Bassline Festival that took place in Manchester. He used a Sony A7s with a Canon 35mm F2 and a Zeiss 24-70mm F4 lens - all balanced on the CAME-7800 for the video.

The CAME-7800 is a 3-axis gimbal that is able to hold setups that weigh up to 6.5 lbs, making it perfect for shooters who want to use their DSLR/Mirror-less cameras with a slightly heavier lens. Right out of the box, the CAME-7800 has multiple operating modes that give the shooter different options while shooting a scene. You can disable the follow mode on the pan/tilt, enable the follow mode on the pan/tilt or a "commixture" mode, which allows you to enable the pan but disable the tilt. All the modes can easily be cycled through by pressing the joystick down.

CAME-7800 3 Axis Camera Gimbal

For more information on the CAME-7800 3-axis gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-7800 3 Axis Camera Gimbal

facebooktwitterpinterestfacebooktwitterpinterest

Vimeo user, Media Collaboratory, uploaded this quick video of him grabbing some footage with his new CAME-TV Single gimbal. His camera setup was a Panasonic GH-4 with a Lumix G 14mm f/2.5 ASPH II lens and it was all shot in V-Log.
The CAME-Single is designed to be portable and easy to use with just one hand. It's completely tool-less, so that there's no hassle balancing or making minor adjustment while your camera is on the gimbal itself. There are two main pieces of the CAME-Single - the handle and the frame, both of which have their own padded cut out in the hard case. Having the gimbal in two pieces allows the shooter to be able to quickly break it down and bring it to different shooting locations. The max payload of the CAME-Single is about 2.6 lbs and can work with lightweight mirror-less camera setups.

CAME-TV Single Gimbal

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV Single Gimbal

 

facebooktwitterpinterestfacebooktwitterpinterest

You4reel, uploaded this short highlight video of the Miss Ireland 2015 competition. He filmed it with a Panasonic GH-4 balanced on the CAME-7800 gimbal.

The CAME-7800 is an upgraded version of the old CAME-7500 and comes pre-assembled. The 7800 has an updated quick release plate with tool-less adjustments on the roll and yaw axis, making it easier to balance your camera on the gimbal. Although, you4reel doesn't state what type of lens he used, the CAME-7800 is able to hold more weight than our Mini 2 gimbal. It has a max payload of about 6.5 lbs and is perfect for your Canon 5D model DSLR cameras.

CAME-7800 3 Axis Camera Gimbal

For more information on the CAME-7800 3-axis gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-7800 3 Axis Camera Gimbal

facebooktwitterpinterestfacebooktwitterpinterest

Vimeo User, Sean J. Vincent, used the CAME-TV Mini 2 gimbal to shoot this promotional video for the Project 7 Tactical Gear.

The CAME-Mini 2 is completely tool-less and has a sleek/compact body, making it extremely easy to carry around and hold. It's designed for compact setups for cameras like the Panasonic GH-4, BMPCC, Sony A7S and other mirror-less type cameras. The custom molded carrying case that the Mini 2 comes in, provides protection when you need to take the gimbal with you to different locations.The horizontal crossbar on the Mini 2 holds the four rechargeable 18650 batteries that power the gimbal.

CAME-MINI 2 Camera Gimbal For A7S GH4 BMPCC

 

For more information on the CAME-Mini 2 Gimbal click below! Make sure to also sign up for the newsletter to receive updates and information on any new products we release.

CAME-MINI 2 Camera Gimbal For A7S GH4 BMPCC

facebooktwitterpinterestfacebooktwitterpinterest

TG Film & Photo, uploaded this test of him following his dog with the CAME-Single gimbal. He balanced his Sony A7SII with a Zeiss 16-35mm lens.
The CAME-Single is a one-handed basecam designed gimbal that utilizes encoder technology to increase the stability of the gimbal. The batteries are internal rechargeable batteries that can last up to 20 hours. The CAME-Single can hold camera setups that don't exceed 2.6 lbs, so its perfect for mirror-less cameras that are lightweight. In the first test video he uploaded, he was walking down a wobbly pontoon in the water to see if any of the bounce can be seen in the footage. Watch the video below! He also states that he didn't add any post-stabilization.

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Single gimbal

 

 

facebooktwitterpinterestfacebooktwitterpinterest

Vimeo user, llija, uploaded this quick test CAME-TV 7800 gimbal test. The whole test was shot with the Nikon D600 plus a 17-35mm F.28 lens.

With a max payload of about 6.5 lbs, the CAME-7800 is perfect for DSLR cameras like the Canon 5D series, Nikon DSLRs and even Panasonic GH-4s with a heavier lens. The CAME-7800 comes pre-calibrated with a 32-bit Alexmos control board and is tool-less on the Roll and Yaw axis, making it easier for you to balance your setup on the gimbal. There are two different version of the CAME-7800 that you can purchase - the 7800 gimbal by itself or with a case and a balancing stand.

32 Bit CAME-7800 3 Axis Camera Gimbal

For more information on the CAME-7800 3-axis gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

32 Bit CAME-7800 3 Axis Camera Gimbal

facebooktwitterpinterestfacebooktwitterpinterest

Vimeo user, Liszön, recently used the CAME-Mini 2 gimbal to shoot a music video for the song "Little War" by the band Spy From Moscow. It was shot using two BMPCC cameras and he would switch between three different lenses. Liszon, states that his Mini 2 setup used solely a Samyang 12mm F2 lens with his BMPCC and for the other handheld shots he used a Tamron 17-50mm and a Sigma 30mm.

The CAME-Mini 2 is completely tool-less and gives the shooter three different profiles to use. Profile 1 - enables follow mode on the pan and tilt, Profile 2 - allows follow mode on the pan (not the tilt) and Profile 3 - disables follow mode on the pan and tilt. All of the wiring and electronics are all completely enclosed in the frame of the CAME-Mini 2, which will prevent any wires from getting in the way while the gimbal is in use.

CAME-MINI 2 Camera Gimbal For A7S GH4 BMPCC

For more information on the CAME-Mini 2 Gimbal click below! Make sure to also sign up for the newsletter to receive updates and information on any new products we release.

CAME-MINI 2 Camera Gimbal For A7S GH4 BMPCC

 

facebooktwitterpinterestfacebooktwitterpinterest

Vimeo user, PanoVerino, uploaded this quick video that he shot while he was on a trip over the weekend. All the aerials were shot with a DJI Phantom 3 and all the ground shots were filmed using the CAME-Single gimbal with his Sony A7SmkII + Sony 16-35mm F4 lens.

The CAME-Single provides the shooter with incredible stability, while also being extremely portable. It comes packed in a hard case with foam padding on the inside, making sure that the CAME-Single doesn't get damaged when you bring it to multiple shoots. Balancing your camera on the CAME-Single is easy due to the tool-less design and the quick release camera plate. The CAME-Single has a larger frame than most pistol-grip gimbals, allowing you to fully tilt the camera up and down.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

 

facebooktwitterpinterestfacebooktwitterpinterest

Michaels Video and Wedding Cinema, posted this quick out of the box test of the CAME-TV GP-80Q Parallax Video Slider! He stated that he filmed it with his Panasonic G7 and mounted a cheap tripod head onto the slider for the test.

The GP-80Q comes with a parallax track attached in between the two main carbon fiber rods, allowing the slider to have automatic panning. There is one thumb knob on each end of the slider that will allow you to quickly adjust the parallax track for the type of slide you want to achieve. It weighs in at only 2.6 lbs and can hold a max payload of about 17.6 lbs.

CAME-TV Camera Slider Carbon Fiber 80cm Lightweight GP-80Q

There are two different version of the CAME-TV Carbon Fiber Parallax slider - the GP-80Q and the GP-120Q. The main difference is the overall length of the sliders, the GP-80Q is 80cm(2.6 ft.) and the GP-120Q is 120cm(3.9 ft.).

For more information on the CAME-TV GP-80Q Slider click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV Camera Slider Carbon Fiber 80cm Lightweight GP-80Q

facebooktwitterpinterestfacebooktwitterpinterest

Youtube user,  JBF (Johnnyboy Films),  recently uploaded this fanmade music video he shot for the song "Everything" by the band Black Skirts. It was shot using the CAME-Single Gimbal and the Panasonic G7! He also mentioned that he used three different lenses - the Lumix 12-35mm f2.8, Lumix 20mm f1.7 and the Sigma 17-50mm with a Micro four-thirds adapter.

The CAME-Single is a 3-axis basecam controlled gimbal that is designed to be used with one hand. It has a net weight of of about 1.2kg(roughly 2.6lbs), making it easy to carry around with you on different types of shoots. The CAME-Single is great for smaller setups that don't exceed 2.6 lbs - like mirror-less cameras such as the BMPCC, Panasonic GH-4 and the Sony A7S/A7RII cameras. It has a built-in joystick that can easily be used with your index finger for panning and tilting to achieve multiple types of camera shots. The new encoder technology that are built-in the brushless motors offer more stability, increases torque and decreases the power consumption - making the gimbal's battery life last longer.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

 

facebooktwitterpinterestfacebooktwitterpinterest

Mimicking the success of the CAME-ACTION Gimbal for GoPros, the new CAME-ACTION 2 is designed with the same encoder technology offering unparalleled performance and stability for Smartphones like the iPhone 6 or 6s.

CAME-ACTION 2 Gimbal For Smartphones

The CAME-ACTION 2 is lightweight and extremely portable - constructed from an Aluminum alloy and weighs in at a very light 300 grams / 0.66 pounds (without the battery and camera) and is compatible with the iPhone. Like the CAME-ACTION for the GoPro, the CAME-ACTION 2 is 3-axis and has a 32-bit board with encoders. The CAME-ACTION 2 is now available for pre-order and will start shipping the pre-orders in March 2016.

CAME-ACTION 2 Gimbal For Smartphones

Click below for more information on the CAME-ACTION 2! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-ACTION 2 Gimbal For Smartphones