Blog

FacebooktwitterpinterestFacebooktwitterpinterest

Andrew Gerard, posted this final scene from a short film he's been working on. The scene was filmed entirely with the CAME-Single gimbal and his Sony A7Rii with the Fe 28mm F2 lens!
The CAME-Single is one of the first basecam controlled gimbals that offer encoders. The encoders will prevent the motors from losing sync, increase torque/stabilization and decrease power consumption. The CAME-Single is perfect for mirror-less cameras like the Panasonic GH4, the Sony A7S series, A7RII and the Blackmagic Pocket Cinema cameras. If you haven't scene Andrew Gerard last Came-Single video, watch it below!

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

 

 

FacebooktwitterpinterestFacebooktwitterpinterest

CAME-TV 21.5" 3G-SDI HDMI IPS Monitor Full HD With Sony V-Mount

The Monitor is a full HD 1920X1080 resolution, high contrast 3000:1 monitor, with a wide viewing angle IPS Panel. It provides a wide range of A/V connections for compatibility with SD and HD signals. Inputs and outputs include 3G HD-SDI, HDMI, Composite and Component.

The monitor features a wide horizontal and vertical viewing angle, up to 250nit and High Contrast 3000:1. This means you’ll be able to see accurate, consistent and bright images from any point of view. A selection of advanced monitoring features are available to help you properly monitor and focus your shots. Features include focus peaking, check field, screen marker and center marker. A 1:1 pixel mapping function is also available, allowing you to view the original resolution of your footage for more accurate focusing.

The monitor can be powered via the Sony V mount plate, the 12 VDC port, or a male 4-pin XLR connector. There are three handles incoporated into the monitor, two on the front and one in the rear providing ease of transfer from in or out of the case. The included aluminum case provides robust protection for field monitoring, travel and storage.

HIGH QUALITY IPS PANEL

CAME-TV 21.5" 3G-SDI HDMI IPS Monitor Full HD With Sony V-Mount

YOU MIGHT BE INTERESTED IN THESE MONITORS

CAME-TV 5" 800*480 SDI & HDMI Pro-Broadcast HD Monitor 502-SDI CAME-TV 7" 1024*600 HDMI SDI Pro-Broadcast HD Monitor 702-SDI CAME-TV Peaking Focus Assist 7" IPS 1280*800 HDMI Field Monitor
CAME-TV 5"
800*480 
CAME-TV 7"
1024*600
CAME-TV 7"
1280*800
SDI & HDMI Pro-Broadcast HD Monitor 502-SDI HDMI SDI Pro-Broadcast HD Monitor 702-SDI IPS HDMI Field Monitor Peaking Focus Assist
read more read more read more

FacebooktwitterpinterestFacebooktwitterpinterest

BoomshotsTV, uploaded this music video for the song "My Space" by the band Unified Highway. The CAME-TV JX300B Dolly And Track was used setup for multiple shots, being uses as both a linear track and a curved one.

The CAME-TV Dolly and Track can be configured in a straight and/or a curved track, allowing you to assemble it in multiple ways for different types of shots. The Dolly and Track are extremely easy to assemble because of the magnetic locking system - making the Dolly and Track all tool-less.  A few weeks ago, Satostudiogear, uploaded some BTS footage of them using the CAME-TV Dolly and Track during the music video shoot. Check it out below.

For more information on the CAME-TV JX300B Track Dolly click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV Dolly And Track Straight Rail And Curved Rail JX300B

FacebooktwitterpinterestFacebooktwitterpinterest

Andrew Gerard, recently posted this fight scene called "Two Faced", which he shot with the CAME-Single and Sony A7Rii camera with a Fe 28mm F2 lens. The short film follows two guys as they duke it out in a boxing gym.

The CAME-Single was used the whole time for the short and he shot all of it in one day. The CAME-Single has encoders built into the brushless motors allowing the gimbal to have an incredible amount of stability. A 1/4-20" and a 3/8" are located underneath the handle for mounting the CAME-Single to a tripod/monopod or to a jib. The CAME-Single comes with a hard case for easy packing and portability.

  CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

  CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

 

 

FacebooktwitterpinterestFacebooktwitterpinterest

, recently posted his second test of the CAME-Single paired with his Sony A7Sii! The video clocks in at about a minute, but it's filled with great shots that show the stability of the CAME-Single. No post stabilization was added.

The CAME-Single is designed to be lightweight, portable and easy to use with just one hand. It has a max payload of about 2.6lbs, making it perfect for cameras like the Sony A7S series, Panasonic GH4, BMPCC, etc. If you want to see Pano Verino's first test, check it out below!

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

 

FacebooktwitterpinterestFacebooktwitterpinterest

In this in-depth review of our CAME-TV 1200W HMI Fresnel LightProjectNReSource, goes through his experience with the light and also the build quality and packaging. . Toward the end of the video he even shows some footage of a project he shot using the CAME-TV 1200W HMI light!

ProjectNReSource, gives great insight on his overall experiences on using the CAME-TV HMI 1200W light. The CAME-TV HMI Fresnel 1200W Light comes with the 1200W lamp head, a dimmable ballast, an aluminum case, barn doors and the power chord. The color temperature ranges from about 5600K to 6000K.

http://www.came-tv.com/hmi-fresneHMI Fresnel Light 1200W Electronic Ballast+Dimmable+ Free Case

He does give some good advice on what to expect when getting the light. When dealing with high end HMI lights, striking the lights quickly after it's been powered off can cause some issues. Like he said in the video, please allow a few minutes before re-striking to avoid any damage to the bulb - a "hot re-strike" can be a problem with any HMI light.

For more information on the CAME-TV HMI Fresnel 1200W light click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

HMI Fresnel Light 1200W Electronic Ballast+Dimmable+ Free Case

 

 

FacebooktwitterpinterestFacebooktwitterpinterest

CAME-TV Pro Cinema Camera Kits

DESIGNED AND BUILT FOR
PROFESSIONAL VIDEOGRAPHERS

RED Scarlet/Epic KitsCAME-TV Rig For BlackMagic URSA KitCAME-TV Rig For Sony FS7CAME-TV Rig For Sony FS5 Kit

YOU MIGHT BE INTERESTED IN THESE OTHER GIMBALS

action unnamed-5 unnamed-4
CAME-ACTION Tool-less CAME-SINGLE Tool-less CAME-ARGO
Tool-less
The design of the CAME-Action allows for one handed smooth operation... The new CAME-SINGLE is one of the first 3 Axis 32 bit Basecam controlled... The new CAME-ARGO features 32 Bit Boards with brushless motors and Encoders....
read more read more read more

FacebooktwitterpinterestFacebooktwitterpinterest

Pano Verino, uploaded his first test with his Sony A7Smk2 balanced  with the CAME-Single gimbal! He does state that there was No Post Stabilization added in post, but the Sony's in camera image stabilization is turned on.

The video is short and mainly focuses on how his setup handles while running and walking. The CAME-Single is one of the first commercially available 3 Axis 32 bit basecam controlled gimbals to offer brushless motors with Encoders. Encoders are often used in Robotics for highly accurate monitoring of the motors position. The design of the CAME-Single is made for shooters to operate the gimbal with just one hand and a 1/4 and 3/8 thread is located under the handle for mounting options.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CameTVSingle

FacebooktwitterpinterestFacebooktwitterpinterest

Mesh Frequency, uploaded this quick field test he did with his new CAME-Single gimbal!

Mesh Frequency, states that the main purpose of this video was to see how the CAME-Single handles when following a subject. He also mention how cold and windy it was while filming this field test.

It was cold and windy but it took only 5 minutes to set up the gimbal. I messed up the focus in few places but my main goal was to follow the subject. Unlike what few reviews on line said the whole thing fit in my bag. Over all I am very happy with the tool.

The CAME-Single offers full 3-axis stabilization with a built in joystick and brushless motors with encoders. It's extremely easy to balance with it's tool-less design and portable body, making it easy to take with you for shoots. The CAME-Single has an internal battery that will allow it to operate for up to 20 hours. 

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

 

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

FacebooktwitterpinterestFacebooktwitterpinterest

satostudiogear, posted this quick BTS video of him using the CAME-TV JX300B Track Dolly on a recent music video shoot!

The CAME-TV JX300B Track Dolly can be configured as a linear track dolly or a curved one, giving the shooter more options for different shots. The rails snap together via strong magnets that are on each end of the rails. The magnets make the track dolly completely tool-less and easy to assemble when out on location for a shoot. The padded bag for the track rails make it extremely portable and easy to pack.
CAME-TV Dolly And Track Straight Rail And Bend Rail JX300B

For more information on the CAME-TV JX300B Track Dolly click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV Dolly And Track Straight Rail And Bend Rail JX300B

FacebooktwitterpinterestFacebooktwitterpinterest

unnamed

This dolly and track system can be configured in straight and/or curved runs. A key feature of the track is our magnetic locking system, completely tool less and allows for quick assembly and disassembly. Crafted out of aircraft grade aluminum the track tubing is durable and light weight. Preconfigured inner and outer arcs provide consistent and smooth transitions for the dolly assembly.

The folding spreader dolly incorporates 3 wheel assemblies that each have 4 smooth gliding wheels. Each wheel assembly pivots 360 degrees and the 4 wheel design provides maximum contact with the rail. Both the track and dolly compact into the included bags, providing easy transportation and handy storing.

MAGNETIC LOCKING SYSTEM IS COMPLETELY TOOL LESS

 

unnamed-1unnamed-3unnamed-5

YOU MIGHT BE INTERESTED IN THESE TRIPODS

unnamed-6 unnamed-7 unnamed-8
Pro Video Tripod Fluid Pan Tilt Head Tool-less Al Tripod
Fluid Pan Tilt Head
Pro Video Tripod
Fluid Pan Tilt Head
read more read more read more

FacebooktwitterpinterestFacebooktwitterpinterest

Park Life, recently uploaded this commercial for "Horizon Career" where he used the CAME-7800 gimbal to film most of the scenes!

The CAME-7800 is a great gimbal for shooters who mostly film with DSLR cameras like a Canon 5Dmk2 or a Nikon. In this video, Park Life used a Sony A7S, which is lighter than a DSLR, but the CAME-7800 can handle it perfectly. The max payload the CAME-7800 is about 6.5lbs and the gimbal offers multiple operating modes, giving the shooter more choices for his/hers scene.

Updated Assembled 32 Bit CAME-7800 3 Axis Camera Gimbal

For more information on the CAME-7800 3-axis gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

Updated Assembled 32 Bit CAME-7800 3 Axis Camera Gimbal

FacebooktwitterpinterestFacebooktwitterpinterest

unnamed

The CAME-Single Wireless Remote is super convenient when you want to remotely control Pan and Tilt on (some) CAME-SINGLE Gimbals. The remote feature works well with a second operator controlling the camera’s movements as the first operator moves around the set. Achieve perfect framing and complete more complex camera movements by working with Dual Operators. If you have your gimbal mounted to the end of a long Crane or Jib you can control easily control the camera with this remote. The system connects via Bluetooth up to 30 feet away. (Range will vary depending on Line of Sight and environmental interference.)

Note: This module is only compatible with Came Single Gimbals purchased after Nov 1st 2015.

SUPER CONVENIENT WHEN YOU WANT TO
REMOTELY CONTROL PAN AND TILT

 

unnamed-1unnamed-3

YOU MIGHT BE INTERESTED IN THESE OTHER GIMBALS

action unnamed-5 unnamed-4
CAME-ACTION Tool-less CAME-SINGLE Tool-less CAME-ARGO
Tool-less
The design of the CAME-Action allows for one handed smooth operation... The new CAME-SINGLE is one of the first 3 Axis 32 bit Basecam controlled... The new CAME-ARGO features 32 Bit Boards with brushless motors and Encoders....
read more read more read more

FacebooktwitterpinterestFacebooktwitterpinterest

After receiving his CAME-singleAndrew Gerard Media, went out and grabbed some quick test footage with his Sony A7Rii!

The CAME-Single gimbal is perfect for shooters who want a simple system thats easy to balance and provides steady footage. The encoders that are built into the brushless motors allow the CAME-Single to be extremely stable. The max payload that the CAME-Single can handle is about 2.6lbs(1.2kg), which is perfect for mirror-less cameras like the Sony A7S series, Panasonic GH4 and the Blackmagic Pocket Cinema Camera.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With EncodersFor more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

FacebooktwitterpinterestFacebooktwitterpinterest

Youtube user, Slashcam, recently uploaded two quick tests he did with the CAME-Single gimbal! Both videos use the CAME-Single, but with different camera setups. The first video uses a Sony A7SII with a FE 3.5-5.6 / 28-70 OSS lens and the second video uses a Panasonic GH4 with a Lumix G X Vario 12-35mm f/2.8 lens.
Each video uses the CAME-Single in different variations. One video focuses on how it performs while you follow a subject and the other video goes through the joystick movements, pan/tilts and holding the CAME-Single as you ride a bike. The CAME-Single is one of the first commercially available 3-axis 32-bit basecam controlled gimbals to offer brushless motors with Encoders.

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders