Blog

facebooktwitterpinterestfacebooktwitterpinterest

Youtube user, Canal Nômade, posted his first test run with the CAME-Mini 2 Gimbal!

Click below for more information on the new CAME-Mini 2 3-Axis Gimbal.

3_came-mini-2-gimbal-panasonic-gh4

facebooktwitterpinterestfacebooktwitterpinterest

You4reel, shot this huge Corona sponsored event in Ireland with the CAME-TV 7800 Gimbal! The CAME-7800 is a 3-axis gimbal designed for cameras like the Canon 5Dmk3, Canon 5Dmk2, Canon 7D and even the Panasonic GH-4.

Click below for more information on the CAME-TV 7800 3-Axis Gimbal.

CAME-TV 7800 3-Axis Gimbal

facebooktwitterpinterestfacebooktwitterpinterest

Vimeo user, North South Films, used the CAME-TV 7800 Gimbal to shoot this short engagement video.

The CAME-7800 features a clean design that hides all of the wires to ensure they don't get damaged while it's being used. The 7800 Gimbal, also gives the shooter multiple operation modes that can easily be switched by pressing the joystick.

CAME-TV 7800 3-Axis Gimbal (Monitor is optional)

Click below for more information on the CAME-TV 7800 3-Axis Gimbal.

CAME-TV 7800 3-Axis Gimbal

facebooktwitterpinterestfacebooktwitterpinterest

Youtube user, Yakir Yahish,  posted this quick video of him doing a driving test with the CAME-Single gimbal!

Click below for more information on the CAME-Single 3-Axis Gimbal.

CAME-Single 3-Axis Gimbal

facebooktwitterpinterestfacebooktwitterpinterest

Vimeo user, No Routes Found, posted this quick review of the CAME-7800 Gimbal while he was on location shooting a documentary. Check it out below!

Click below for more information on the CAME-TV 7800 3-Axis Gimbal.

CAME-TV 7800 3-Axis Gimbal

facebooktwitterpinterestfacebooktwitterpinterest

Low Profile Sony battery plates
The weight saving slim design is great for portability. Can be powered through industry standard Sony batteries (NP-F or V-Mount)
Diffusion Filter Sturdy Yoke
Great for wrapping light around your talent. Quick release handles allow for easy positioning of the LED panel.

LIGHTWEIGHT, PORTABLE AND AFFORDABLE LIGHTING SOLUTION FOR ANY PHOTO, VIDEO, OR FILM PRODUCTION

YOU MIGHT BE INTERESTED IN THESE EXTRAS

Barn Doors Softbox Multi-function Stand
The 4-way adjustable barndoors are ideal for controlling spill light..... Upgrade your level of professionalism... 2-way head enables light mounting in horizontal or vertical axis....
read more read more read more

facebooktwitterpinterestfacebooktwitterpinterest

Recently, Vimeo user, Kluzo, used the CAME-7800 gimbal to cover an event in Paris!
The CAME-7800 uses three motors that stabilize the camera along with the pan, tilt, and roll axis. The motors will help compensate for shakes, vibrations, and other unwanted movements, allowing you to get some smooth shots.

CAME-TV 7800 3-Axis Gimbal
(Monitor Is Optional)

Click below for more information on the CAME-7800 3-Axis Gimbal.

CAME-TV 7800 3-Axis Gimbal

 

facebooktwitterpinterestfacebooktwitterpinterest

In this quick video posted by Youtube user, Joe Taravella, he takes his new CAME-Single gimbal out for a test run! The footage looks great, especially when he walks up and down the stairs. He used his Sony A7S with a Sony 10-18mm F4 lens.The new CAME-Single is one of the first commercially available 3-Axis 32-bit basecam controlled gimbals that offer brushless motors with Encoders.

Click below for more information on the CAME-Single 3-Axis gimbal.

CAME-Single 3-Axis Gimbal

facebooktwitterpinterestfacebooktwitterpinterest

The CAME-Steadicam can hold camera setups that are roughly 5 to 33 pounds with a minimum height of 27.5 inches and a max of 40 inches. The CAME-Steadicam comes equipped with a baseplate that has a Power, AV and HDMI connector. You also have the option to buy the stabilizer and the vest separately or as a package.

CAME-Steadicam Pro

 

Click below for more information on the CAME-Steadicam Pro.

CAME-Steadicam Pro With Vest

facebooktwitterpinterestfacebooktwitterpinterest

Vimeo user, Milton: Motion & Design, posted this video of his first test run right after opening his CAME-Single gimbal!

Click the picture below for more information on the CAME-Single gimbal.

CAME-Single 3-Axis Gimbal

 

facebooktwitterpinterestfacebooktwitterpinterest

Voyager Video, posted this quick test of the CAME-Mini 2 gimbal! It was shot with the Sony A7S and a Zeiss 24-70mm lens.

The new CAME-MINI 2 Gimbal is completely tool-less, which allows the operator to quickly change camera setups and re-balance the entire system for optimal performance. All of the wiring and electronics are enclosed into the frame offering a clean professional appearance and also protecting all the wiring.

CAME-Mini 2 3-Axis Gimbal

Click the picture below for more information on the CAME-Mini 2 Gimbal.

CAME-Mini 2 3-Axis Gimbal

 

facebooktwitterpinterestfacebooktwitterpinterest

3 Axis Gimbal Joystick
For camera systems such as the Panasonic GH4, Blackmagic Pocket Cinema Camera and Sony A7. A thumb controller joystick next to the right handle allows Pan and Tilt control.
Completely Enclosed Handles
All of the wiring and electronics are
completely enclosed into the frame.
Two side handles for hand-held use and a top handle for low-angle shots or for transporting.

FULL 3 AXIS STABILIZATION USING THE LATEST 32BIT CONTROLLERS WITH DUAL IMU SENSORS

YOU MIGHT BE INTERESTED IN THESE OTHER GIMBALS

CAME-Single
With Encoders
CAME-8000
Tool-less
CAME-7800
Tool-less
One of the first commercially available 3 Axis 32 bit Basecam controlled gimbals to offer motors with Encoders .... A handheld stabilizer designed for camera systems weighing up to 11 pounds, making it suitable for... Designed for camera systems such as Canon 5D3, Canon 5D2, Canon 7D, Panasonic GH4, and Sony A7...
read more read more read more

facebooktwitterpinterestfacebooktwitterpinterest

The CAME-7500 3-axis gimbal is designed to compensates for shakes, vibration or any unwanted jitter while shooting, allowing you to capture smoother shots that look like your camera is floating freely. The updated version of the CAME-7500, now includes new quick-release knobs that make it easier to adjust on the roll and yaw axis.

CAME-TV 7500 3-Axis Gimbal

Click the picture below for more information on the CAME-TV 7500 Gimbal.

CAME-TV 7500 3-Axis Gimbal

 

facebooktwitterpinterestfacebooktwitterpinterest

Mr.Cheesycam, uploaded this detailed video on how different profiles and settings can affect your CAME Mini 2 gimbal.

The video also has a nice split screen edit that clearly shows what he's doing in the program, so you can follow along with ease.

Screen Shot 2015-07-27 at 2.05.39 PM

Click the picture below for more information on the CAME Mini 2 gimbal.

CAME Mini 2 3-Axis Gimbal

facebooktwitterpinterestfacebooktwitterpinterest

3 Axis Gimbal Alexmos Board
For camera systems such as Canon 5D3, Canon 5D2, Canon 7D, Panasonic GH4, and Sony A7. 32-bit controller used for the construction of high quality 3-axis camera stabilizing systems.
Smooth Shots Handles
3 motors that stabilize along the pan, tilt, and roll axes. Two side handles for hand-held use and a top handle for low-angle shots or for transporting.

SUPPORTS LOADS UP TO 6.5 LBS AND INCLUDES
PRE-CALIBRATED 32-BIT ALEXMOS CONTROL BOARD

YOU MIGHT BE INTERESTED IN THESE OTHER GIMBALS

CAME-Single
With Encoders
CAME-8000
Tool-less
CAME-7800
Tool-less
One of the first commercially available 3 Axis 32 bit Basecam controlled gimbals to offer motors with Encoders .... A handheld stabilizer designed for camera systems weighing up to 11 pounds, making it suitable for... Designed for camera systems such as Canon 5D3, Canon 5D2, Canon 7D, Panasonic GH4, and Sony A7...
read more read more read more