Tag Archives: came-tv

facebooktwitterpinterestfacebooktwitterpinterest

@oldtripod posted this short clip of some footage he got with his new‪#‎cametv‬ ‪#‎single‬ ‪#‎gimbal‬! Shot on the ‪#‎panasonic‬ ‪#‎lx100‬

facebooktwitterpinterestfacebooktwitterpinterest

Heres another pic of our #cametv #LED #LightPanels being used at a #greenscreen studio by@hmedgroup! Shooting it with a #panasonic #gh4 ・・・
Our previous last minute #greenscreen shoot went pretty well considering the setup we used. So we decided to film the entire #corporatetraining series in my garage.
Quite fun #filming at home actually, haha!#iPhone6s #greenscreenstudio #DIY #IndependentAlliance #corporatevideo #corporatetrainingvideo #panasonicGH4 #panasonic #cametv #LED #LEDPanel #videoproduction #marketing #media #HMediaGroup #Melbourne #Australia

via Instagram http://ift.tt/1SdRHwO

facebooktwitterpinterestfacebooktwitterpinterest

@sunny_dhaliwal_ doing a #photography shoot with the #cametv #UltraSlim #LED #LightPanels! ・・・
www.Sharanrai.com
BTS of our photoshoot with the talented singer/songwriter Natalie Tabares. What an amazing place to shoot in
MUA Claire Pinkney
#photography #photoshoot #portraitphotography #portrait #londonpub #london #londonphotographer #canon #cametv
@sharanrai_ @clarepinkneymua
via Instagram http://ift.tt/1ncURUF

facebooktwitterpinterestfacebooktwitterpinterest

MrCheesycam, uploaded this detailed overview on the new CAME-TV ARGO gimbal were he unboxes, balances and goes through some of the operating modes. The camera he balanced on the ARGO was his Panasonic GH4 and Sigma 20mm f/1.8 lens.


All the motors on the brand new CAME-TV ARGO are equipped with encoders, which makes the gimbal perform more accurately and precise. It comes with a pre-calibrated 32-bit ALEXMOS board and a wireless joystick that you can control and switch to different operating modes. The ARGO comes with a hard case that can fit all the pieces of the gimbal and also the carbon fiber foldable stand.

CAME-ARGO 3 Axis Gimbal Camera 32bit Boards With Encoders

For more information on how to pre-order the new CAME-ARGO click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-ARGO 3 Axis Gimbal Camera 32bit Boards With Encoders

facebooktwitterpinterestfacebooktwitterpinterest

@maxsyder's #cametv #mini #gimbal is back and ready to get used! Already setup for some filming with his #olympusomd and #olympus17mm
Lens! ・・・
Happy to finally have the gimbal back from the company. Had to send it back for repairs after there was an internal problem and it started to smoke. Excited to get back to filming. #gimbal #olympus #filmmaking via Instagram http://ift.tt/1peehKz

facebooktwitterpinterestfacebooktwitterpinterest

@bryanjoel93 posted this pic with his #cametv #DSLR #Cage on his #filmmaking "knowledge source" table! That's a good amount of #americancinematographer
Magazines next to his #slate! ・・・
Knowledge source. #filmmaking #americancinematographer #hollywood #motionpicture #tvproduction #cametv #shoulderrig #clapper #WriteShootEditRepeat #Library #Cinematography #filmmakingnyc #filmmaker #motivation via Instagram http://ift.tt/1TcDOR9

facebooktwitterpinterestfacebooktwitterpinterest

Brandon Rice Films, shared this wonderfully shot video called "Adrienne + Sean - A Love Story", which was filmed with the CAME-TV Mini 2 gimbal balanced for a Panasonic GH4 camera plus a Rokinon 12mm lens.

The CAME-Mini 2 is an extremely portable gimbal that has a max payload of about 2.6 lbs. It's perfect for lightweight micro four-thirds/mirror-less camera setups, just like the setup that Brandon Rice Films used for this video. The Mini 2 comes with a padded carrying case and a balance stand, which can also fit in the case when it is broken down. Balancing your camera setup on the Mini 2 is made easy because it's completely tool-less and any micro balancing adjustment to the frame can be done practically on the fly.

CAME-TV Mini 2 Gimbal

For more information on the CAME-Mini 2 Gimbal click below! Make sure to also sign up for the newsletter to receive updates and information on any new products we release.

CAME-TV Mini 2 Gimbal

facebooktwitterpinterestfacebooktwitterpinterest

A few common questions that we receive from customers regarding our gimbals are (A) Does my camera & lens combo work? and (B) What is the gimbal's maximum payload?

Though this information can be found on all of our gimbals' respective product pages, below you will see a quick index showing the appropriate camera types along with the maximum payloads that each gimbal is designed to support.

CAME-Prophet
Cameras supported - Medium-sized DSLR cameras, including Canon 5D/7D Series, Panasonic GH4, Sony A7r/A7s series, etc.
Maximum Payload (including lens & accessories): 6.6 lbs / 3 kg

CAME-8000
Cameras supported - Larger camera setups, including BMCC, CANON C100/C300, RED EPIC, CANON 5D Series/7D Series, etc.
Maximum Payload (including lens & accessories): 11 lbs / 4.9 kg

CAME-TV Prodigy
Cameras supported -Larger camera setups, including SONY FS7, BlackMagic Design URSA MINI, RED RAVEN, RED EPIC, CANON C100/C300, CANON 5D Series / 7D Series, etc.
Maximum Payload (including lens & accessories): 15lbs / 7kg.

CAME-7500/7800/ARGO
Cameras supported - Medium-sized DSLR cameras, including Canon 5D/7D Series, Panasonic GH4, Sony A7r/A7s series, etc.
Maximum Payload (including lens & accessories): 6.6 lbs / 3.0 kg

Mini 3
Cameras supported - Smaller to medium-sized DSLR and mirrorless cameras, including BMPCC, Panasonic GH4, Sony A7r/A7s series, etc. with lighter lenses.
Maximum Payload (including lens & accessories): 2.6 lbs / 1.2 kg
Note regarding lens adapters: We strongly suggest that only native lenses be combined with your cameras while being mounted on these gimbals. Lens adapters such as metabones will add excess weight to the setup (plus usually attached to heavier lenses), which will exceed the max payload, and prevent your gimbal from balancing properly.

CAME-Mini 1, Mini 2, Single, Optimus,
Cameras supported - Small mirrorless cameras, including BMPCC, Panasonic GH4, Sony A7r/A7s series, a6300, etc. with lighter lenses.
Maximum Payload (including lens & accessories): 2.6 lbs / 1.2 kg
Note regarding lens adapters: We strongly suggest that only native lenses be combined with your cameras while being mounted on these gimbals. Lens adapters such as metabones will add excess weight to the setup (plus usually attached to heavier lenses), which will exceed the max payload, and prevent your gimbal from balancing properly

View CAME-TV's entire line of gimbals here.

facebooktwitterpinterestfacebooktwitterpinterest

@nastaydrek shared this BTS pic from a shoot he recently filmed using a single #cametv #LedLight as the main light source!
・・・
A little behind the scenes grab from my shoot last Sunday at @crispbarbershopcolorado - check out my production IG page @innovative_motion #innovativemotion #crispbarbershop #canon #cametvledlights #cametv #cameraslider #production #bts @atmosphereaerosol - we used your product on a few shoots now #colorado #videoproduction via Instagram http://ift.tt/1VHPhpd

facebooktwitterpinterestfacebooktwitterpinterest

HDVideshop Berlin, uploaded this quick overview of our new CAME-ARGO 3-axis gimbal. The video goes over the main features of the ARGO and how easy it is to setup. In the beginning of the video, he has a Sony A7s with a Zeiss 24-70mm F/4 lens balanced on the  CAME-ARGO.


The CAME-ARGO features a 32 bit Alexmos board and is completely tool-less, which makes balancing your camera on the gimbal a breeze. A wireless remote is included with the CAME-ARGO, which allows you to control the gimbal from a distance and also switch to different operating modes. There is a D-Tap output on the bottom of the gimbals frame, allowing you to power accessories like a wireless follow focus.

CAME-TV ARGO 3-Axis Gimbal

For more information on how to pre-order the new CAME-ARGO click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV ARGO 3-Axis Gimbal

facebooktwitterpinterestfacebooktwitterpinterest

@incuprod shooting an interview with two #sonya7s cameras and a pair of our #cametv #LedLights! ・・・
On location with #worldventures in #johannesburg #southafrica filming interviews. Using a pair of #sonya7s cameras and lights from #cametv via Instagram http://ift.tt/1T86B9j

facebooktwitterpinterestfacebooktwitterpinterest

@lh_visuals posted this pic of his #cametv #panasonic #gh4 #cage setup from a shoot he filmed last year! With a #rode #videomic attached on the top handle ・・・
last years biking shoot with biking by @benlehner28 and dp by @leopoldhotz also had my @rhinocg evo slider with me! For results click link in profile! #young#travel#life#trip#street#canon#film#gopro#nikon#panasonic#love#picoftheday#City#lhvisuals#instadaily#gh4#rode#rodemic#biking#mtb#cametv via Instagram http://ift.tt/1VF8Qyw

facebooktwitterpinterestfacebooktwitterpinterest

Vimeo user, Luigi De Vita, uploaded this short clip of a video he shot using the CAME-Single gimbal and his Sony A7SII camera + a Sony zeiss 24-70mm f4 lens.

In the video, the CAME-Single is used for tracking the subject as he walks toward the van before ultimately getting in it. The van then drives off and we slowly follow as it starts to leave the parking garage. With a max payload of 2.6 lbs, the CAME-Single is designed to be portable, easy to balance and used with just one-hand. The encoders on the CAME-Single enhances the gimbals performance by preventing the motors from losing sync, increasing the torque/stability and decreasing the power consumption - allowing the gimbal to last longer.

CAME-TV Single Gimbal

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV Single Gimbal

 

facebooktwitterpinterestfacebooktwitterpinterest

The #cametv #7800 #gimbal amongst all of @chupis_filmz's video gear! Thanks for the support!
・・・
Invest in your self, be a leader not a follower. 😉 🙌 🎥 📹 🚁 #DJI #dji3 #konova #cametv #canon #rode #hero4 #gopro via Instagram http://ift.tt/1TxGF5h

facebooktwitterpinterestfacebooktwitterpinterest

@daneeldeej went out and filmed a music show recently with his #cametv #single #gimbal! ・・・
Fell in love with the #camesingle last night filming @davidrodigan and @gentlemansdubclub at RamJam! Super smooth shots from such a tiny set up. #sentientvisuals #3axisgimbal #cametv
via Instagram http://ift.tt/20Twx7s