Tag Archives: canon

facebooktwitterpinterestfacebooktwitterpinterest

@privatesalesescorts posted this BTS pic while shooting their webseries. Using the #cametv #7800 with a #canon5d!
・・・
Shooting Private Sales in Raw with the magic lantern firmware, came7800, 5dII and a vintage Nikon 35mm lens. You can see the finished scene in episode #2. Now on YouTube. #youtubewebseries #indiefilm #filmmaking #bts #canon5d #magiclantern #came7800
via Instagram http://ift.tt/1oQOQ1n

facebooktwitterpinterestfacebooktwitterpinterest

You4reel, uploaded this short highlight video of the Miss Ireland 2015 competition. He filmed it with a Panasonic GH-4 balanced on the CAME-7800 gimbal.

The CAME-7800 is an upgraded version of the old CAME-7500 and comes pre-assembled. The 7800 has an updated quick release plate with tool-less adjustments on the roll and yaw axis, making it easier to balance your camera on the gimbal. Although, you4reel doesn't state what type of lens he used, the CAME-7800 is able to hold more weight than our Mini 2 gimbal. It has a max payload of about 6.5 lbs and is perfect for your Canon 5D model DSLR cameras.

CAME-7800 3 Axis Camera Gimbal

For more information on the CAME-7800 3-axis gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-7800 3 Axis Camera Gimbal

facebooktwitterpinterestfacebooktwitterpinterest

Vimeo user, llija, uploaded this quick test CAME-TV 7800 gimbal test. The whole test was shot with the Nikon D600 plus a 17-35mm F.28 lens.

With a max payload of about 6.5 lbs, the CAME-7800 is perfect for DSLR cameras like the Canon 5D series, Nikon DSLRs and even Panasonic GH-4s with a heavier lens. The CAME-7800 comes pre-calibrated with a 32-bit Alexmos control board and is tool-less on the Roll and Yaw axis, making it easier for you to balance your setup on the gimbal. There are two different version of the CAME-7800 that you can purchase - the 7800 gimbal by itself or with a case and a balancing stand.

32 Bit CAME-7800 3 Axis Camera Gimbal

For more information on the CAME-7800 3-axis gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

32 Bit CAME-7800 3 Axis Camera Gimbal

facebooktwitterpinterestfacebooktwitterpinterest

@shinya_videographer using the #cametv #7800 #gimbal to film some scenes in the snow! ・・・
CAME7800#came7800#movi#movim10#djironin#dslr#dslr#dslrfilmmaking#dslrvideo#videoshooting#videographer#cinematography#eos60d#ronin#movie#videography#camera#shooting#cameragear#filmmaker#cinematographer#videomaking#filmmaking#gimbal#一眼ムービー#撮影#撮影機材#映像制作#夕日#夕焼けvia Instagram http://ift.tt/1RPZtgL

facebooktwitterpinterestfacebooktwitterpinterest

@jonogeestudio posted this pic of his #canon #5dmk3 setup with the #cametv #mattebox! ・・・
A great day shooting for #AusDay on #strayaday. This setup worked well with the #Canon #5dmarkiii rigged with the #rodemic #stereovideomicx, Swivi viewfinder and #cametv #mattebox.
via Instagram http://ift.tt/1SkprI2

facebooktwitterpinterestfacebooktwitterpinterest

@rawhunter.de posted this throwback pic of his #cametv #7500 #gimbal setup from 2014! ・・・
Back in 2014, filming with @walzcycles and @yamaha_yard_built at the @hockenheimring_official
#hockenheim #filming #yamaha #YardBuiltProject #gimbal #cametv #came7500 #stabilizer #canon #6d
via Instagram http://ift.tt/1QAsKel

facebooktwitterpinterestfacebooktwitterpinterest

Park Life, recently uploaded this commercial for "Horizon Career" where he used the CAME-7800 gimbal to film most of the scenes!

The CAME-7800 is a great gimbal for shooters who mostly film with DSLR cameras like a Canon 5Dmk2 or a Nikon. In this video, Park Life used a Sony A7S, which is lighter than a DSLR, but the CAME-7800 can handle it perfectly. The max payload the CAME-7800 is about 6.5lbs and the gimbal offers multiple operating modes, giving the shooter more choices for his/hers scene.

Updated Assembled 32 Bit CAME-7800 3 Axis Camera Gimbal

For more information on the CAME-7800 3-axis gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

Updated Assembled 32 Bit CAME-7800 3 Axis Camera Gimbal

facebooktwitterpinterestfacebooktwitterpinterest

Check out this test film by Ryoma Yoshimura that he shot entirely with the CAME-7800 gimbal! He used a Canon 5Dmk2 and a 60D with three different lenses - a Sigma 70-200 F.2.8, 25-105mm and a 50mm.
The CAME-7800 gimbal is a great gimbal if your camera setup is a little bit on the heavier side. With a max payload of about 6.5lbs(3kg), it can hold bigger DSLR cameras like the Canon 5D series or the Nikon cameras. The CAME-7800 has tool-less adjustment for the yaw and roll axis, making it easy to balance your camera.

CAME-7800 3 Axis Camera Gimbal

For more information on the CAME-7800 3-axis gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-7800 3 Axis Camera Gimbal

facebooktwitterpinterestfacebooktwitterpinterest

Moonlight Productions, posted this quick short film test of him using the CAME-7800 gimbal with a Panasonic GH4 paired with the 7-14mm lens. Due to the privacy settings on the video, please click here to watch the video! Or click the image below!
Screen Shot 2015-12-07 at 4.29.04 PM

The CAME-7800 gimbal is a 3-axis gimbal that can hold cameras like the Panasonic GH4 or the heavier DSLR cameras like the Canon 5Dmk2 - as long as it doesn't exceed the 6.5lbs payload. It makes balancing a breeze with it's tool-less roll and YAW design, allowing you to make possible adjustments on the fly. The clickable thumb stick gives you the option to cycle through different operating modes that can increase your creative possibilities.

32 Bit CAME-7800 3 Axis Camera Gimbal

For more information on the CAME-7800 3-axis gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

32 Bit CAME-7800 3 Axis Camera Gimbal

 

facebooktwitterpinterestfacebooktwitterpinterest

In this quick review, MrCheesyCam, goes over the CAME-TV 100m Wireless HD Video Transmitter Kit. Not only does he go over the specs, he even attaches it to his Panasonic GH4 camera and tests the range of the 100m Wireless HD Transmitter Kit.

The 100m HD Transmitter Kit make it extremely easier for the shooter and the director to collaborate together. The shooter can be filming as the director watches from a distance on an external monitor. The transmitter takes a common Canon LP-E6 battery and the receiver uses a Sony NP-F570/F750 battery. Syncing the transmitter and receiver requires you to simply cycle through the numbers by clicking the "Mode" button then hitting "Ok" to confirm.

CAME-TV 100m Wireless HD Video Transmitter And Receiver

For more information on the 100m Wireless HD Video Transmitter Kit click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV 100m Wireless HD Video Transmitter And Receiver

facebooktwitterpinterestfacebooktwitterpinterest

Tempo Media UK, went out with his Panasonic GH4 and CAME-7800 and shot this video that showcases BMX rider, Jay Cowley.

The video shows how the CAME-7800 gimbal can be a good piece of equipment to have for shooting action sports like BMX, skateboarding, rollerblading, etc. The CAME-7800 is a great gimbal for DSLR cameras like the Canon 5Dmkiii or mkii but can also work with smaller cameras like a Panasonic GH4 or Sony A7s.

CAME-7800 3-Axis Gimbal

For more information on the CAME-7800 3-axis gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV 7800 3-Axis Gimbal

 

facebooktwitterpinterestfacebooktwitterpinterest

Ken Lauguico, posted this video that highlights a wedding he shot using the CAME-7500 and CAME-Single 3-axis gimbals. He used two different DSLR cameras, the Canon 6D and the Canon 5Dmkii.
The video has a ton of great tracking shots that follow the bride and the groom as they both get ready for the ceremony. The CAME-Single is  a great one handed gimbal that provides extremely steady footage because of the brushless motors with the new encoder technology. The CAME-Single is great for cameras like the Sony A7sii, Panasonic GH4 or the BMPCC.

CAME-TV Single 3-axis GimbalAlthough, the CAME-7500 is no longer available, the CAME-7800 is an upgraded version of the 7500 gimbal and is tool-less.  For more information on the CAME-Single or the CAME-7800 click below! Make sure to also sign up for the newsletter to receive updates and information on any new products we release.

CAME-Single 3-axis gimbalCAME-TV 7800 3-axis gimbal

facebooktwitterpinterestfacebooktwitterpinterest

, posted this wedding video he shot using the CAME-7800 3-axis gimbal with a Canon 5DmkII + 17-40mm lens! The video shows a lot of great tracking shots of the bride and groom walking through some beautiful outdoor locations.
The CAME-7800 can support setups up to 6.5 pounds, which is perfect for cameras like a Canon 5DmkIII, Canon 7D or even a Panasonic GH4. The CAME-7800 offers multiple modes that you can cycle through by clicking the joystick. The updated version of the 7800 Gimbal has new quick release knobs that make it easier to balance on the roll and yaw axis.

CAME-7800 3-Axis Gimbal(monitor and camera not included)

For more information on the CAME-7800 3-Axis Gimbal click below!

CAME-7800 3-Axis Gimbal

facebooktwitterpinterestfacebooktwitterpinterest

BBW Production, uploaded this short clip of him using the CAME-7800 3-axis gimbal on a recent music video shoot!
With a max payload of about 6.5lbs, the CAME-7800 is designed to hold heavier DSLR type cameras like a Canon 5Dmk2 or 5Dmk3. The CAME-7800 uses three motors that stabilize the pan, tilt and roll axis, which will compensate for shakes and unwanted vibrations. Quick release knobs have been added to the CAME-7800, making the roll and yaw axis tool-less for easier balancing.

CAME-7800 3-Axis Gimbal

For more information on the CAME-7800 3-Axis Gimbal click below!

CAME-7800 3-Axis gimbal

facebooktwitterpinterestfacebooktwitterpinterest

BBW Production, used the CAME-7800 Gimbal to shoot this short film he worked on about fly fishing!
The CAME-7800 Gimbal is a 3-axis hand held stabilizer that is able to compensate for any unwanted shakes and/or vibrations. With a max payload of 6.5 pounds, the CAME-7800 can hold cameras like the Canon 5Dmk3, Canon 7D, Panasonic GH4 and even a Sony A7. The CAME-7800 offers different operation modes that you can easily switch through by pressing on the joystick.

CAME-7800 3-Axis Gimbal

Click below for more information on the CAME-7800 3-Axis Gimbal.

CAME-7800 3-Axis Gimbal