Tag Archives: pid tuning

facebooktwitterpinterestfacebooktwitterpinterest

We must first note that all CAME-TV gimbals are pre-programmed and quality-tested to function right out of the box. No additional software tuning or firmware upgrades should be necessary. However, if you would like to make minor tuning adjustments with the SimpleBGC software at your own accord- such as changing joystick speeds, decreasing motor power, etc. - we suggest that you first SAVE the gimbal's default, factory-programmed settings before making such changes.

Should something go wrong as you're making the changes, you can always revert back and load the original default profiles. And please note that the profiles that you save contain settings that are unique to your gimbal. Sharing these profiles with other gimbal owners is not advised and can make their gimbal inoperable.

And perhaps most importantly, under no circumstances do we advise upgrading your firmware. Doing so will wipe your settings and make your gimbal inoperable. The only way to potentially make it functional again would be to send it back to a CAME-TV support facility for repair (at your own cost if out of warranty).

[IMPORTANT NOTE:] Your saved Default Profile is configured to the default Firmware installed on your Gimbal. If you attempt to upgrade your firmware, the saved Default Profile will no longer be valid.

facebooktwitterpinterestfacebooktwitterpinterest

This video by MrCheesycam should only be used as a reference for restoring your the default configuration found on the CAME-TV CAME-MINI2 Gimbal using firmware 2.43 b9.

While you can use the video as reference to copy the settings exactly, there are a few areas in which you DO NOT want to change on your system. This video will explain which options you should copy, and which settings you should NOT COPY.

Primarily you do not want to change your default Invert settings under Motor Configuration. If you believe you need to make changes to your Invert options, you can view our FAQ Article About Gimbal Motor Invert Options.

Do not change your default RC Trim Settings according to the settings in the video above. If you believe you need to make changes to your RC Trim Settings, you can view our FAQ Article about Gimbal RC Settings.

For additional information about the CAME-MINI2 Gimbal, We suggest visiting our blog article regarding How To Use Service Modes and Profiles with the CAME-MINI2 Gimbal by MrCheesycam found here.