The CAME-7800 is a stabilizer that features two side handles for hand-held use and a top handle for low-angle shots. The CAME-7800 offers multiple operation modes, which you can cycle through by clicking on the joystick. You can choose to lock the camera in place along all three axes, have the camera smoothly follow your pan and tilt motions while keeping the horizon level or lock the tilt axis while allowing the camera to pan left and right.
BBW Production, uploaded this short clip of him using the CAME-7800 3-axis gimbal on a recent music video shoot!
With a max payload of about 6.5lbs, the CAME-7800 is designed to hold heavier DSLR type cameras like a Canon 5Dmk2 or 5Dmk3. The CAME-7800 uses three motors that stabilize the pan, tilt and roll axis, which will compensate for shakes and unwanted vibrations. Quick release knobs have been added to the CAME-7800, making the roll and yaw axis tool-less for easier balancing.
Vimeo user, De Rienzo Films, posted this compilation video of different shots from a wedding they shot with the CAME-Single!
The CAME-Single is a 3-axis 32-bit basecam controlled gimbal that offers brushless motors with encoders. The batteries for the CAME-Single are now completely internal and on a full charge can last about 20 hours. The large frame gives the shooter the ability to fully tilt up and down without the camera hitting the gimbal. With a 1.2kg max payload, the CAME-Single is perfect for your mirror-less cameras like the Sony A7s, Panasonic GH4 or the BMPCC.
The brand new CAME-Action Gimbal is made solely for the GoPro Hero 3, 3+ and 4. Like the CAME-Single, the CAME-Action is a 3-axis gimbal that has brushless motors with encoders. The CAME-Action is extremely lightweight - weighing in about 300 grams(0.66 pounds) without the camera and batteries. It comes with a durable carrying case that the gimbal fits nicely into.
Thevideomode.com, posted a detailed article about the CAME-Single and the experiences they had with it. In the video, he demos the CAME-Single with his BMPCC and Lumix 7-14mm kens. In addition to the article, they also uploaded a video review and shot a quick test film that was shot entirely with the CAME-Single. Make sure you check out the full article here!
The CAME-Single is a 3-axis handheld gimbal that has encoders built into the brushless motors. The new updated version has internal batteries, which increases the battery life for up to 20 hours. The CAME-Single Gimbal is designed to hold small mirror-less cameras like the GH4, A7s or the Blackmagic Pocket Cinema Camera.
Leopold Hotz, recently used the CAME-Mini2 Gimbal to film a talented biker cruising through some parks! It was filmed using a Panasonic GH-4 with the Panasonic 12-35mm lens.
The CAME-Mini2 is completely tool-less, allowing the shooter to balance and change camera setups quickly. A quick release system has been added, making it easier to remove or insert your camera onto the Mini2 Gimbal. All the wires are completely enclosed into the frame, so that the wires won't be in the way as you shoot.
YOU4REEL.com, posted this quick video that was shot with one of our CAME-TV Gimbals showing the Coty Showcase in Dublin's Georgian building!
The CAME-TV Gimbals are completely 3-Axis and are designed to get shots that look fluid. There are different types of CAME-TV Gimbals that can support a wide range of cameras - from mirror-less cameras to more heavy duty cameras like the Blackmagic Cinema Camera. Recently, the new CAME-Action Gimbal was just announced, which is designed solely for GoPro cameras.
Vimeo user, Remo Chapeaublanc, uploaded this quick video of him testing out the CAME-Single Gimbal for the first time with his Sony A7RII and 16mm F/2.8 lens.
The size of the CAME-Single is perfect for mirror-less cameras like the GH4, A7s and A7RII. The quick release plate on the CAME-Single is completely tool-less making balancing your camera on the gimbal a breeze. Due to the encoder technology on the CAME-Single, stabilization is more precise and information about the frame and camera angles are more accurate.
Vitographyy, uploaded this short video of some footage he shot using one of our CAME-TV gimbals at the "86 Fest" car show. CAME-TV gimbals are completely 3-axis and offer multiple operation modes to suit the shot in which you are trying to achieve. There are different types of CAME-TV gimbals that can hold cameras like the GoPro to heavy duty cameras like the BlackMagic Production Camera.
For more information on the different type of CAME-TV Gimbal click below.
Vimeo user, De Rienzo Films, went out to Trafalgar Square in London and grabbed some shots with his Panasonic GH3 with a 14mm pancake lens balanced on a CAME-Single 3-Axis Gimbal.
The CAME-Single is a handheld gimbal that is made for smaller cameras like the Sony A7s, BMPCC or the Panasonic GH3/GH4. The brushless motors with encoders, prevent the motors from being out of sync and can give you detailed information about the frame and the angle of your camera. The internal rechargeable batteries are fitted inside the handle of the CAME-Single itself, making it easier to plug-in and charge.
Youtube user, DayZeroSurvivors, uploaded this quick test of him putting the CAME-Single through a running test with his Panasonic GH-4 + Lumix G X Vario PZ 14-42mm lens.
The CAME-Single has a larger frame than most pistol-grip style gimbals, allowing you to fully tilt up and down. The brushless motors are also significantly larger and have encoders built in them for more accurate motor readings. The CAME-Single has a run time of about 20 hours when the battery is fully charged.
Vimeo user, Valdas Kotovas, posted this quick video of him using the CAME-Single with his Sony A7s camera and Sony 24-70mm lens.
The CAME-Single gimbal is the first commercially available basecam controlled gimbal that offers brushless motors with encoders. Encoders are usually used in robotics to get extremely accurate monitoring of the positions of the motors. The CAME-Single is tool-less, making it easy to balance your camera while it's on the gimbal.
BBW Production, used the CAME-7800 Gimbal to shoot this short film he worked on about fly fishing!
The CAME-7800 Gimbal is a 3-axis hand held stabilizer that is able to compensate for any unwanted shakes and/or vibrations. With a max payload of 6.5 pounds, the CAME-7800 can hold cameras like the Canon 5Dmk3, Canon 7D, Panasonic GH4 and even a Sony A7. The CAME-7800 offers different operation modes that you can easily switch through by pressing on the joystick.
Youtube user, Ed Rakel, posted this quick video of him using his new CAME-Single Gimbal with a Panasonic GH-4 + Olympus 12 mm f2.0.
The CAME-Single is designed around the idea of being able to operate a gimbal with just one hand. It's 3-axis with a 32-bit board and the brushless motors have encoders, making it the first basecam controlled gimbal on the market with encoders. The max payload the CAME-Single can handle is 2.6lbs and is designed for smaller cameras like the Sony A7s, Panasonic GH4 or the Blackmagic Pocket Cinema Camera.
Scotty Ray from Satostudiogear, posted a video a little bit ago of his hike up the famous "Half Dome" in Yosemite National Park. He recently uploaded this video of his review of the CAME-Single and mentions how he was able to pull off some of the camera shots he was able to capture in his Yosemite video.
"It was awesome to be able to pull a gimbal out of your backpack and have it up and running in 30 seconds... I also attached the Gimbal to the top of my Tripod by removing the manfrotto head. This is useful for shots you can't normally reach, or over tall cliffs " -Scotty Ray
If you haven't seen his "Half Dome" Yosemite video, make sure to check it out below!