USE COUPON CODE:
FOURTHSLIDER
YOU MIGHT BE INTERESTED IN THESE GIMBALS
 |
 |
 |
| CAME-ACTION Tool-less | CAME-ACTION 2 Tool-less |
CAME-ARGOTool-less |
| The design of the CAME-Action allows for one handed smooth operation... | 32 Bit Boards with brushless motors and Encoders designed for iPhone and similar sized phones... | The CAME-ARGO is completely tool-less which allows the operator to change camera setups.... |
 |
|
|
We were luck enough to have the Gear Addix crew pass by our booth and film a little interview on some of the CAME-TV Gimbals that we showcased at the 2016 Cine Gear Expo!
The size of the CAME-Single is perfect for mirror-less cameras such as the Panasonic GH4, Sony A7s | A7RII, and BlackMagic Pocket Cinema Cameras. The encoders on the CAME-Single prevent motors from losing synchronization, provides important information about frame and camera angles, decreases power consumption (longer battery life), increases Torque and precision of stabilization.
The Optimus model also features encoders and allows for one hand operation, but with all of the controls and battery now relocated outside of the handle, the single handle can be changed to Dual Handles depending on the camera operator's requirement.  All motors rotate a full 360 degrees without limitation for greater range and flexibility during operation.
The CAME-Mini 3 is our latest edition to the CAME-MINI Gimbal Series. The new Mini 3 uses basecam 32 bit controllers with encoders. All of the wiring and electronics are completely enclosed into the frame, offering a clean professional appearance and protecting the wiring.
For more information on our entire CAME-TV Gimbal line click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.
Youtube user, MrCheesyCam uploaded this detailed instructional video on how to setup our CAME-Accordion Jib!
The Accordion Crane features an extending scissor arm that puts the camera right where you need it. The accordion motion allows the arm to extend 4.7 Meters (15 feet) out and then retract back in. The Accordion is controlled by a rocker switch and the drive is powered by a V-Mount battery (not included).
For more information on the CAME-Accordion Jib click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.
CREATIVE Team, recently uploaded their second test video on the CAME-TV ARGO gimbal! The video was shot with the Canon 5DmkIII with three different lenses; the Canon 24-105mm, 50mm and 18-200mm!
The CAME-ARGO features a 32 bit Alexmos Board and is completely tool-less, making balancing your camera setup easy and quick. All of the motors are equipped with encoders, which makes the ARGO's performance more smooth and accurate, along with increasing the lifespan of the battery.
For more information on the CAME-ARGO click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.
Vimeo user, Dieter Knüttel uploaded his first test video on the new CAME-Optimus 3-axis gimbal! He filmed it with the Panasonic GH4 and Lumix 12-35mm lens. Dieter, does state in the description of the video that the shaky part at 0:52 seconds is due to his hand touching the seat and not a caused by the Optimus.
The CAME-Optimus is the successor to our very successful CAME-Single gimbal. The Optimus model also features encoders and allows for one hand operation, but with all of the controls and battery now relocated outside of the handle, the single handle can be changed to Dual Handles depending on the camera operator's requirement.  All motors rotate a full 360 degrees without limitation for greater range and flexibility during operation.
For more information on the CAME-TV Optimus gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.
USE COUPON CODE:
FOURTHSLIDER
YOU MIGHT BE INTERESTED IN THESE OTHER GIMBALS
|
|
|
| CAME-ACTION Tool-less | CAME-ACTION 2 Tool-less |
CAME-ARGOTool-less |
| The design of the CAME-Action allows for one handed smooth operation... | 32 Bit Boards with brushless motors and Encoders designed for iPhone and similar sized phones... | The CAME-ARGO is completely tool-less which allows the operator to change camera setups.... |
|
|
|
Vimeo user, XFactor Aerial uploaded this quick test video of him using the CAME-Single paired with his Sony a6300 camera. The lens he used was the 15mm-55mm Var Zoom. Due to the privacy settings set by the user, please click the image below to watch it!
XFactor Aerial, shot the test at the MetLife Stadium during the Copa America 2016 event. The size of the CAME-Single is perfect for mirror-less cameras such as the Panasonic GH4, Sony A7s | A7RII, and BlackMagic Pocket Cinema Cameras. The encoders on the CAME-Single prevent motors from losing synchronization, provides important information about frame and camera angles, decreases power consumption (longer battery life), increases Torque and precision of stabilization.
For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.
Vimeo user, Filips Baumanis uploaded this nicely shot montage video of Hiiumaa Island. The video was shot with the CAME-ACTION gimbal with the GoPro Hero 4 Silver!
The CAME-ACTION gimbal for the GoPro features brushless motors with encoders. The gimbal is constructed from aluminum alloy and weighs in at 300 grams / 0.66 pounds (without the battery and camera) and is compatible with the GoPro 3, 3+ & 4.
For more information on the CAME-ACTION gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.
@scottyray_satostudios testing out his new ‪#‎Sony‬ ‪#‎a6300‬ setup with the‪#‎cametv‬ ‪#‎mini3‬ ‪#‎gimbal‬! ‪#‎CameGimbal‬ ‪#‎CameMini3‬ ‪#‎Sonya6300‬ Via Instagram
THE UNIQUE FOLDING ARM SLIDER PROVIDES BOTH LINEAR AND PANNING MODES
YOU MIGHT BE INTERESTED IN THESE OTHER GIMBALS
 |
 |
|
| CAME-Prodigy Tool-less |
CAME-Mini 3 Tool-less |
CAME-Argo Tool-less |
| The CAME-PRODIGY gimbal is the physically largest of our gimbal family..... | 32 Bit Boards with brushless motors and Encoders with a 5.8G video transmitter... | The CAME-ARGO is completely tool-less which allows the operator to change camera setups.... |
|
|
|
Life2PRO - Travel Video, posted this stunning travel video of Siargao Island in the Philippines. He filmed it with the CAME-ARGO gimbal paired with the Sony A7s and the Zeiss 24-70mm lens!
The CAME-ARGO features a 32 bit Alexmos Board and is completely tool-less for easy balancing. All of the motors are equipped with encoders, making the gimbals performance more smooth and accurate. On the bottom of the ARGO there's a video transmitter along with a D-Tap out, which you can power an accessory like a wireless follow focus.
For more information on the CAME-ARGO click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.
Vimeo user, Laurent BRIERE shared this awesome video that covers the 5th edition of the "Trail de Sancerre" marathon in France! He covered the event with the CAME-Single gimbal paired with the Panasonic GH4 and Lumix 12-35mm lens.
The encoders on the CAME-Single: prevent the motors from losing sync/skipping steps, provides important information about the frame and also decreases the power consumption - increasing the battery life. The Single now comes with the new Dual Gimbal Handles that will give the gimbal operator smoother pan & tilt motions.
For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.
SmallRig, recently released a Dovetail Mount that works specifically with our CAME-TV Single gimbal!
The CAME-Single Dovetail Mount 1745 allows you to easily remove your camera from the Single (with the Single's dovetail still attached to your camera) and attach it to another accessory like a tripod.
You can find more information on the SmallRig CAME-Single Dovetail Mount here! For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.
Vimeo user, Xylophone Films uploaded this quick highlight video that shows an event that took place at Mumford Brewing in Los Angeles. It was filmed with the CAME-Single gimbal paired with the Panasonic GH4 and Lumix 12-35mm lens!
The CAME-Single has a quick release camera plate and is completely tool-less, making it easy to balance your camera setup. The size of the CAME-Single is perfect for mirror-less cameras such as the Panasonic GH4, Sony A7s/A7RII, and BlackMagic Pocket Cinema Cameras. The Single is designed to be operated with just one hand. A 1/4-20" and 3/8" thread is located under the handle for mounting options. The internal rechargeable batteries are fitted inside the pistol grip handle and the built in Joystick can be used for controlling camera positions.
For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.
USE COUPON CODE:
DAD2016CAGE
YOU MIGHT BE INTERESTED IN THESE OTHER GIMBALS
|
|
|
| CAME-ACTION Tool-less | CAME-ACTION 2 Tool-less |
CAME-ARGOTool-less |
| The design of the CAME-Action allows for one handed smooth operation... | 32 Bit Boards with brushless motors and Encoders designed for iPhone and similar sized phones... | The CAME-ARGO is completely tool-less which allows the operator to change camera setups.... |
|
|
|
