The CAME-Steadicam can hold camera setups that are roughly 5 to 33 pounds with a minimum height of 27.5 inches and a max of 40 inches. The CAME-Steadicam comes equipped with a baseplate that has a Power, AV and HDMI connector. You also have the option to buy the stabilizer and the vest separately or as a package.
Voyager Video, posted this quick test of the CAME-Mini 2 gimbal! It was shot with the Sony A7S and a Zeiss 24-70mm lens.
The new CAME-MINI 2 Gimbal is completely tool-less, which allows the operator to quickly change camera setups and re-balance the entire system for optimal performance. All of the wiring and electronics are enclosed into the frame offering a clean professional appearance and also protecting all the wiring.
The CAME-7500 3-axis gimbal is designed to compensates for shakes, vibration or any unwanted jitter while shooting, allowing you to capture smoother shots that look like your camera is floating freely. The updated version of the CAME-7500, now includes new quick-release knobs that make it easier to adjust on the roll and yaw axis.
Youtube user, SWAF Jarrad, posted some quick test footage from his CAME-Single 3-Axis gimbal. In the video, he does mention that he had some trouble in the beginning, but once he changed the lens on his camera, everything was a lot smoother. His setup in the video was a Panasonic GH-4 with a Panasonic 14-140mm lens. Check out his footage below!
Here's a quick test of the CAME-Single that AeroVideo shot with his Sony A7S camera plus a Sony 28-70mm lens.
The new CAME-SINGLE is one of the first commercially available 3-Axis 32-bit basecam controlled gimbals that offer brushless motors with Encoders.The design of the CAME-SINGLE allows the shooter to operate the gimbal with just one hand and has a 1/4-20 and 3/8 threaded mounting point located under the handle.
Click the picture below for more information on the CAME-Single
The CAME-Single is equipped with brushless motors that have encoders. The encoders prevent motors from losing synchronization, skipping steps, decreases power consumption, increases Torque, increases the precision of the stabilization and provides important information about frame and camera angles.
Max Snyder, uploaded this short video that shows test footage of him using the CAME-Mini 1 Gimbal for the first time! The wiring and electronics on the CAME-Mini 1 are completely enclosed into the frame, giving a clean professional appearance.
The CAME-TV GH-4 Cage is designed specifically for the Panasonic GH-4 and provides easy access to the battery and SD card without actually removing the camera from the cage. The baseplate that comes with the CAME-TV GH-4 Cage has 15mm rod holes that allow you to attach industry standard 15mm rods for accessories like a follow focus.