@mrcheesycam using the #cametv #ARGO #gimbal with a #DTap adapter that has a built in #USB port to give power to his #Sony #A7sII camera!
HDVideshop Berlin, uploaded this quick overview of our new CAME-ARGO 3-axis gimbal. The video goes over the main features of the ARGO and how easy it is to setup. In the beginning of the video, he has a Sony A7s with a Zeiss 24-70mm F/4 lens balanced on the CAME-ARGO.
The CAME-ARGO features a 32 bit Alexmos board and is completely tool-less, which makes balancing your camera on the gimbal a breeze. A wireless remote is included with the CAME-ARGO, which allows you to control the gimbal from a distance and also switch to different operating modes. There is a D-Tap output on the bottom of the gimbals frame, allowing you to power accessories like a wireless follow focus.
For more information on how to pre-order the new CAME-ARGO click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.
Vimeo user, Luigi De Vita, uploaded this short clip of a video he shot using the CAME-Single gimbal and his Sony A7SII camera + a Sony zeiss 24-70mm f4 lens.
In the video, the CAME-Single is used for tracking the subject as he walks toward the van before ultimately getting in it. The van then drives off and we slowly follow as it starts to leave the parking garage. With a max payload of 2.6 lbs, the CAME-Single is designed to be portable, easy to balance and used with just one-hand. The encoders on the CAME-Single enhances the gimbals performance by preventing the motors from losing sync, increasing the torque/stability and decreasing the power consumption - allowing the gimbal to last longer.
For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.
With the growing popularity of these two Sony cameras, a sturdy and reliable rig is a must have. Our Sony FS5 Rig gives you all the essentials you would need to deck out your camera. It has a shoulder pad, a wooden top handle and the top and bottom baseplates have options to mount 15mm rods.
Our Sony FS7 Rig is basically three main pieces that can easily attach together to form one solid piece. The FS7 Rig is covered in mounting points, allowing the shooter to attach a bunch of accessories to the top plate, side plate and even the top handle. Like the FS5 Rig, you have the option to attach a pair of 15mm rods to the top and bottom plates.
If you haven't check out this review on the Sony FS7 Rig by Satostudiogear make sure you check it out.
For more information on the CAME-TV FS5 Rig and the CAME-TV FS7 Rig click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.
Kyle SHOX Brown FILMS, posted this promo video of the Bassline Festival that took place in Manchester. He used a Sony A7s with a Canon 35mm F2 and a Zeiss 24-70mm F4 lens - all balanced on the CAME-7800 for the video.
The CAME-7800 is a 3-axis gimbal that is able to hold setups that weigh up to 6.5 lbs, making it perfect for shooters who want to use their DSLR/Mirror-less cameras with a slightly heavier lens. Right out of the box, the CAME-7800 has multiple operating modes that give the shooter different options while shooting a scene. You can disable the follow mode on the pan/tilt, enable the follow mode on the pan/tilt or a "commixture" mode, which allows you to enable the pan but disable the tilt. All the modes can easily be cycled through by pressing the joystick down.
For more information on the CAME-7800 3-axis gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.
Vimeo User, Sean J. Vincent, used the CAME-TV Mini 2 gimbal to shoot this promotional video for the Project 7 Tactical Gear.
The CAME-Mini 2 is completely tool-less and has a sleek/compact body, making it extremely easy to carry around and hold. It's designed for compact setups for cameras like the Panasonic GH-4, BMPCC, Sony A7S and other mirror-less type cameras. The custom molded carrying case that the Mini 2 comes in, provides protection when you need to take the gimbal with you to different locations.The horizontal crossbar on the Mini 2 holds the four rechargeable 18650 batteries that power the gimbal.
For more information on the CAME-Mini 2 Gimbal click below! Make sure to also sign up for the newsletter to receive updates and information on any new products we release.
TG Film & Photo, uploaded this test of him following his dog with the CAME-Single gimbal. He balanced his Sony A7SII with a Zeiss 16-35mm lens.
The CAME-Single is a one-handed basecam designed gimbal that utilizes encoder technology to increase the stability of the gimbal. The batteries are internal rechargeable batteries that can last up to 20 hours. The CAME-Single can hold camera setups that don't exceed 2.6 lbs, so its perfect for mirror-less cameras that are lightweight. In the first test video he uploaded, he was walking down a wobbly pontoon in the water to see if any of the bounce can be seen in the footage. Watch the video below! He also states that he didn't add any post-stabilization.
For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.
Vimeo user, PanoVerino, uploaded this quick video that he shot while he was on a trip over the weekend. All the aerials were shot with a DJI Phantom 3 and all the ground shots were filmed using the CAME-Single gimbal with his Sony A7SmkII + Sony 16-35mm F4 lens.
The CAME-Single provides the shooter with incredible stability, while also being extremely portable. It comes packed in a hard case with foam padding on the inside, making sure that the CAME-Single doesn't get damaged when you bring it to multiple shoots. Balancing your camera on the CAME-Single is easy due to the tool-less design and the quick release camera plate. The CAME-Single has a larger frame than most pistol-grip gimbals, allowing you to fully tilt the camera up and down.
For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.
NuShyld Face Shield Protection are now available on Came-TV USA Warehouse! Click Here
