Tag Archives: cametv

FacebooktwitterpinterestFacebooktwitterpinterest

Check out this test film by Ryoma Yoshimura that he shot entirely with the CAME-7800 gimbal! He used a Canon 5Dmk2 and a 60D with three different lenses - a Sigma 70-200 F.2.8, 25-105mm and a 50mm.
The CAME-7800 gimbal is a great gimbal if your camera setup is a little bit on the heavier side. With a max payload of about 6.5lbs(3kg), it can hold bigger DSLR cameras like the Canon 5D series or the Nikon cameras. The CAME-7800 has tool-less adjustment for the yaw and roll axis, making it easy to balance your camera.

CAME-7800 3 Axis Camera Gimbal

For more information on the CAME-7800 3-axis gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-7800 3 Axis Camera Gimbal

FacebooktwitterpinterestFacebooktwitterpinterest

Check out this video that Darryl Smith posted of him using the CAME-Single with a Panasonic and a Panasonic 8mm f/3.5 ED Fisheye lens!

Although, the video is mostly a test on how the Panasonic GH4 looks when the 4K is down converted to 1080, he does use the CAME-Single gimbal the whole time. The CAME-Single is made to hold camera setups that are no more than 2.6lbs(1.2kg). The encoders that are built into the brushless motors allow the gimbal to be extremely stable and use up less battery than needed. The CAME-Single can operate for up to 20 hours when it's fully charged.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

FacebooktwitterpinterestFacebooktwitterpinterest

  CAME-TV Sony FS5 Camera Rig Wooden Top Handle Base Plate

Top Handle
Constructed out of wood and aluminum. The wood provides an attractive finish and is comfortable to grip providing a warmer surface than cold metal. There are many fastening holes in the top of the handle and there is a 15mm hole on the stem to mount a 15mm rod perpendicular which can provide additional mounting methods for accessories. The base of the handle is dovetailed which insures a secure and adjustable mount to the top plate.

Top Plate
Features two 15mm rod holes for expanding the system and is physically attached to the Sony FS5 via four mounting fasteners.

Base Plate
The heart of this kit is the base plate that features a quick release system to easily attach and detach the shoulder pad base. There are two 15mm rod holes that run through the base that allows front and/or back mounting of 15mm rods. This base incorporates two rosettes which allows for adding accessories. In addition there is a dovetailed tripod plate that provides quick and secure mounting to a tripod.

SONY FS5 SOLUTION FOR QUICK SHOULDER
OR TRIPOD MOUNTING

CAME-TV Sony FS5 Camera Rig Wooden Top Handle Base Plate

YOU MIGHT BE INTERESTED IN THESE PRODUCTS

 

CAME-TV DSLR Cage W/ Hand Grip For GH4 & SONY A7s & 5D Mark III CAME-TV DSLR Cage For GH4 & SONY A7s & 5D Mark III CAME-TV DSLR Cage Rigs For GH4 & SONY A7s & 5D Mark III
DSLR Cage W/ Hand Grip DSLR Cage DSLR Cage Rig
For GH4 & SONY A7s... For GH4 & SONY A7s... For GH4 & SONY A7s....
read more read more read more

 

FacebooktwitterpinterestFacebooktwitterpinterest

Filmmaker, Tom Antos, recently used a Sony A7sii balanced on the CAME-Single gimbal to film this entire music video! The video follows singer, Anna Cyzon as she walks around the streets of New York. The CAME-Single is perfect for a project that requires a lot of tracking shots, especially if it takes place in crowded areas.

The CAME-Single is small enough to be carried around, but is also strong enough to handle a max payload of 2.6lbs. Tom Antos, also posted a quick making of the music video, which he uploaded the same time as the music video was released. It goes through the creative process and even shows why he decided to shoot the entire music video with the CAME-Single. Watch the making  below!

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

FacebooktwitterpinterestFacebooktwitterpinterest

unnamed-2

We are having a spectacular sales event on several popular items. This is our way of saying thanks to our existing and new customers. We will be frequently updating with new sale items, so stay tuned for these great savings!

unnamed

CAME-80T Carbon Fiber DSLR Camera Slider Track Video StabilizerCAME-80T Carbon Fiber DSLR Camera Slider Track Video Stabilizer

unnamed
CAME-15T Pro Carbon Tripod For RED EPIC Cage DSLR Rigs

CAME-15T Pro Carbon Tripod For RED EPIC Cage DSLR Rigs

 

 

FacebooktwitterpinterestFacebooktwitterpinterest

unnamed-2

We are having a $100 off sales event on several popular items. This is our way of saying thanks to our existing and new customers. We will be frequently updating with new sale items, so stay tuned for these great savings!

unnamed

unnamedunnamed-1

unnamed
unnamed

unnamed-1

 

 

FacebooktwitterpinterestFacebooktwitterpinterest

Sean J Vincent, recently shared with us a teaser from a web series he worked on that used the CAME-Mini 2 gimbal! He shot it with a Panasonic GH4 and a G Vario 14-42mm lens.

Here's a short synopsis taken from the "Paradox" video description:

Shot at the end of the summer in Norfolk, this web series follows the adventures of a time traveller and the girl who rescues him... Why is he here? Where did the time machine come from? When is he from?
All will be revealed soon...

The web series was shot using a Panasonic GH4 and a Sony FS100. If you want a closer look of Sean J. Vincent's CAME-Mini 2 setup, check out this review on the Mini 2 he posted a few months ago while he was shooting "Paradox".

For more information on the CAME-Mini 2 Gimbal click below! Make sure to also sign up for the newsletter to receive updates and information on any new products we release. Also, be sure to check out the first episode of "Paradox" on December 22, 2015.

CAME-MINI 2 Camera Gimbal For A7S GH4 BMPCC

 

FacebooktwitterpinterestFacebooktwitterpinterest

, posted this quick test video a few days ago of him trying out the Samsung NX-1 camera paired with the CAME-7500 gimbal.

The CAME-7500 is the older version of what is now the CAME-7800 3-axis gimbal. The 7500 gimbal required users to build the gimbal and  required tools to balance the camera on the carriage. Now, most of the gimbals that we offer are tool-less, pre-built and some even have encoders built into the motor (CAME-Single & CAME-Action). The CAME-7800 is a good gimbal for setups that might be too heavy for the CAME-Mini 2 or the CAME-Single. We have a variety of gimbal models that can hold small action cameras(CAME-Action) or bigger setups like a Blackmagic Cinema Camera(CAME-8000).

CAME-MINI 2 Camera Gimbal For A7S GH4 BMPCC

CAME-7800 3 Axis Camera Gimbal

For more information on any of the 3-axis gimbals we offer click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Mini2

FacebooktwitterpinterestFacebooktwitterpinterest

Csproductions87, uploaded this wedding he shot using his Panasonic GH4 balanced on a CAME-7500 gimbal with a Rokinon 16mm Cine Lens. The video is a quick highlight video that follows bride and groom as they prepare for the ceremony.

Although, the CAME-7500 gimbal is discontinued, we advise that you check out the updated version of the 7500 - the CAME-7800. The CAME-7800 is  based on the original CAME-7500, but it's completely upgraded and pre-assembled. The 7800 has upgraded; handles, quick release plate and is tool-less on the roll and YAW axis.

CAME-7500 Gimbal
CAME-7500 3-Axis Gimbal

CAME-7800 Gimbal
CAME-7800 3 Axis Camera Gimbal

For more information on the CAME-7800  or any of the 3-axis gimbals we offer click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

came-7800

FacebooktwitterpinterestFacebooktwitterpinterest

Moonlight Productions, posted this quick short film test of him using the CAME-7800 gimbal with a Panasonic GH4 paired with the 7-14mm lens. Due to the privacy settings on the video, please click here to watch the video! Or click the image below!
Screen Shot 2015-12-07 at 4.29.04 PM

The CAME-7800 gimbal is a 3-axis gimbal that can hold cameras like the Panasonic GH4 or the heavier DSLR cameras like the Canon 5Dmk2 - as long as it doesn't exceed the 6.5lbs payload. It makes balancing a breeze with it's tool-less roll and YAW design, allowing you to make possible adjustments on the fly. The clickable thumb stick gives you the option to cycle through different operating modes that can increase your creative possibilities.

32 Bit CAME-7800 3 Axis Camera Gimbal

For more information on the CAME-7800 3-axis gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

32 Bit CAME-7800 3 Axis Camera Gimbal

 

FacebooktwitterpinterestFacebooktwitterpinterest

unnamed-2

We are having a $100 off sales event on several popular items. This is our way of saying thanks to our existing and new customers. We will be frequently updating with new sale items, so stay tuned for these great savings!

unnamed

$100 Off Crane Jib Arm For DV Cameras!$100 Off Crane Jib Arm For DV Cameras!

unnamed
CAME-TV 7" 1024*600 HDMI SDI Pro-Broadcast HD Monitor 702-SDI

CAME-TV 7" 1024*600 HDMI SDI Pro-Broadcast HD Monitor 702-SDI

 

 

FacebooktwitterpinterestFacebooktwitterpinterest

Brandon Lane, uploaded this test video that is mainly focused on how the Sony A7Sii Slog2 performs. In the video he decided to try it out by following his dogs with the CAME-Mini 2 gimbal.
The video is all in slo-mo using a Samyang 35mm Cine T1.5 and a Samyang 14mm T3.1 lens shot at 120fps. Brandon Lane, does state that he shot the whole video with the CAME-Mini 2 set to  mode 1(Follow Mode). The CAME-Mini 2 is a tool-less 3 axis gimbal that is designed for smaller bodied cameras like the Panasonic GH4, BMPCC and/or the Sony A7Sii cameras. All of the wiring and electronics are completely enclosed into the frame, offering a clean professional appearance and to also protect the wiring.

CAME-MINI 2 Camera Gimbal For A7S GH4 BMPCC

For more information on the CAME-Mini 2 Gimbal click below! Make sure to also sign up for the newsletter to receive updates and information on any new products we release.

CAME-MINI 2 Camera Gimbal For A7S GH4 BMPCC

 

FacebooktwitterpinterestFacebooktwitterpinterest

TheVideoMode.com, posted a  detailed article about their experiences with the CAME-ACTION gimbal for the GoPro camera. Check out the sample footage they uploaded into the article below.

The article is separated into multiple parts that include: the features, in use and the overall verdict of the CAME-ACTION. The CAME-ACTION is designed for the Hero 3, 3+ and 4 GoPro models, along with some other action cameras that have a similar body type. It's completely tool-less, which make using it a breeze, especially when you are in a rush. The encoders make it extremely stable and increases the battery life of the CAME-ACTION when its in use because it allows the gimbal to run on less power.

CAME-Action Gimbal 3 Axis For Gopro 32 Bit Boards With Encoders

 

There are many solutions available that use a simple counterweight to stabilize the camera whilst you are moving it. However, for the sheer control that it is offered by the Came-Action 3-axis Gimbal it beats all of these device. - TheVideoMode.com

For more information on the CAME-ACTION gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Action Gimbal 3 Axis For Gopro 32 Bit Boards With Encoders

 

FacebooktwitterpinterestFacebooktwitterpinterest

unnamed-2

We are having a $100 off sales event on several popular items. This is our way of saying thanks to our existing and new customers. We will be frequently updating with new sale items, so stay tuned for these great savings!

unnamed

CAME-TV 7" 1024*600 HDMI SDI Pro-Broadcast HD Monitor 702-SDICAME-TV 7" 1024*600 HDMI SDI Pro-Broadcast HD Monitor 702-SDI

unnamed
CAME-TV DSLR Cage W/ Hand Grip For GH4 & SONY A7s & 5D Mark III

unnamed-1

 

 

FacebooktwitterpinterestFacebooktwitterpinterest

David Oastler, uploaded a video a few weeks ago that went over a majority of the details and specs of the CAME-Single gimbal. Recently, he shared this follow up video with us about using the CAME-Single on multiple wedding gigs he shot.

In the first half of the video, David Oastler gives a quick rundown of his personal experiences using the CAME-Single. In the second half of the video he provides some test footage from different  weddings he shot where he used the CAME-Single to follow the bride and groom walking. The CAME-Single is great for cameras like the Panasonic GH4, Sony A7s/A7rII and/or the Blackmagic Pocket Cinema Camera. If you haven't seen David Oastler's first video, make sure you check it out below! 

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV Single 3-Axis Gimbal