Tag Archives: encoders

facebooktwitterpinterestfacebooktwitterpinterest

Hungry Boy Productions, shared this wonderfully shot wedding highlight video that they recently filmed. They used a bunch of a gear for the shoot and one piece of gear they used was our CAME-TV Single gimbal! Although, they didn't specify what their exact setup with the CAME-Single was - they did say this,

"All gimbal, slider shots taken with Tokina 11-16 F2.8 Lens and all slow motion done on a blackmagic micro cinema camera (bmmcc) with a Panasonic 12-35 2.8"

The CAME-Single offers full 3-axis stabilization with a built-in joystick and brushless motors with encoders. It's extremely easy to balance with it's tool-less design and portable body, making it easy to take with you for shoots. The CAME-Single has an internal battery that will allow it to operate for up to 20 hours.

CAME-TV Single 3-Axis GimbalFor more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV Single 3-Axis Gimbal

 

facebooktwitterpinterestfacebooktwitterpinterest

@brandonrice1 just got his brand new #cametv #optimus #gimbal in the mail! Thanks for the support! #Camegimbalsnap5 #CameOptimus #3axis #Panasonic #gh4 #panasonicgh4 #CameGimbal - Brand new gimbal called Optimus from @cametv Review coming shortly! #cametv #optimus #gimbal #gh4 #lumix #cinematography #Regrann via Instagram https://www.instagram.com/p/BH0iCvEhdYD/

facebooktwitterpinterestfacebooktwitterpinterest

MyLifeIn4K, uploaded this video that was filmed by Bruce Doan of a video walkthrough at the Soka University International Festival. The video is great because it gives a little bit of insight of how it must of been walking through the crowd at the festival. It was filmed with the CAME-TV Single gimbal paired with the Sony a6300 with a Sony 10-18mm lens!

The CAME-Single works as a great portable 3-axis gimbal that can easily be balanced and carried around. With Single now including the new Dual Gimbal Handles, it provides the gimbal operators with smooth camera panning and tilt motions. The tool-less adjustment of the Dual Handles allow for easy configuration and can even act as a stand when the handles are positioned right angled to the cross bar.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

facebooktwitterpinterestfacebooktwitterpinterest

GlainKanVision, recently uploaded this quick test video of him trying out the CAME-Single with the new Sony a6300 camera! The camera lens he used was the Sony Zeiss 16-70 F/4.

The Single gimbal is designed to be operated with just one hand. The encoders on the CAME-Single: prevent the motors from losing sync/skipping steps, provides important information about the frame and also decreases the power consumption - increasing the battery life. The Single now comes with the new Dual Gimbal Handles that will give the gimbal operator smoother pan & tilt motions.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With EncodersFor more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

 

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

facebooktwitterpinterestfacebooktwitterpinterest

BTS pic of @johndavismedia filming a documentary with his #cametv #single #gimbal & #Sony #A7sII! #CameGimbal #CameSingle #singlesnap1 #SonyA7s2 - Behind the scenes of a mini doc we shot today #thelifeofacarer #Regrann via Instagram https://www.instagram.com/p/BHvlSNeBY9h/

facebooktwitterpinterestfacebooktwitterpinterest

Awesome #cametv #Argo #gimbal setup by @uturncrossfit for his #Sony #A7sII! #CameArgo #CameGimbal #SonyA7sii #argosnap3 - NERD ALERT..... #whattofilmnext #utcf #uturncrossfit #crossfit #sonya7sii #cametv #workout #motivation #fitness #community #recordeverything #video #somuchtolearn #kindofheavy #myclan #findahobby #rokinon #35mm #smallhd502 #makeitfun #whatsmygoodsideagain #Regrann via Instagram https://www.instagram.com/p/BHnnLKohkvQ/

facebooktwitterpinterestfacebooktwitterpinterest

We were luck enough to have the Gear Addix crew pass by our booth and film a little interview on some of the CAME-TV Gimbals that we showcased at the 2016 Cine Gear Expo!

The size of the CAME-Single is perfect for mirror-less cameras such as the Panasonic GH4, Sony A7s | A7RII, and BlackMagic Pocket Cinema Cameras. The encoders on the CAME-Single prevent motors from losing synchronization, provides important information about frame and camera angles, decreases power consumption (longer battery life), increases Torque and precision of stabilization.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders
(CAME-Single W/ Dual Handles)

The Optimus model also features encoders and allows for one hand operation, but with all of the controls and battery now relocated outside of the handle, the single handle can be changed to Dual Handles depending on the camera operator's requirement.  All motors rotate a full 360 degrees without limitation for greater range and flexibility during operation.

CAME-OPTIMUS 3 Axis Gimbal Camera 32bit Boards With Encoders
(CAME-Optimus)

The CAME-Mini 3 is our latest edition to the CAME-MINI Gimbal Series. The new Mini 3 uses basecam 32 bit controllers with encoders. All of the wiring and electronics are completely enclosed into the frame, offering a clean professional appearance and protecting the wiring.

CAME-Mini 3 3-Axis Gimbal Camera 32bit Boards With Encoders
(CAME-Mini 3)

For more information on our entire CAME-TV Gimbal line click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

came-optimus_07

 

facebooktwitterpinterestfacebooktwitterpinterest

@sherkhan_to_raatid 's brand new #came #single #gimbal! Thanks for the support! #CameGimbal #CameSingle #3axis - New floating machine 👌 #cametvsingle #raatidmagicfilms #Regrann via Instagram https://www.instagram.com/p/BHlG6TxhH_6/

facebooktwitterpinterestfacebooktwitterpinterest

Can't wait to see some of the test footage that @tom_antos filmed with our #cametv #argo #gimbal! #CameArgo #CameGimbal #argosnap3 - Argo camera gimbal from @cametv is next up for testing #Regrann via Instagram https://www.instagram.com/p/BHky7mLhYFg/

facebooktwitterpinterestfacebooktwitterpinterest

@charlieamazeballs filming on this gorgeous beach in #HoiAn with his #cametv #single #gimbal & #Sony #A7s! #CameGimbal #CameSingle #singlesnap1 #SonyA7s - I couldn't never in the world resist not choosing to not leave the #gimbal home.
Hoi An, summer 2k16.
#cametv #rode
Taken by shortest @longestpham #Regrann via Instagram https://www.instagram.com/p/BHiR7JXhFH6/

facebooktwitterpinterestfacebooktwitterpinterest

CREATIVE Team, recently uploaded their second test video on the CAME-TV ARGO gimbal! The video was shot with the Canon 5DmkIII with three different lenses; the Canon 24-105mm, 50mm and 18-200mm!
The CAME-ARGO features a 32 bit Alexmos Board and is completely tool-less, making balancing your camera setup easy and quick. All of the motors are equipped with encoders, which makes the ARGO's performance more smooth and accurate, along with increasing the lifespan of the battery.

CAME-ARGO 3 Axis Gimbal Camera 32bit Boards With Encoders

For more information on the CAME-ARGO click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-ARGO 3 Axis Gimbal Camera 32bit Boards With Encoders

 

 

facebooktwitterpinterestfacebooktwitterpinterest

@scottyray_satostudios getting those #outdoor #scenic shots with his #cametv #single #gimbal & #Sony #A7s! #CameSingle #CameGimbal #singlesnap1 #SonyA7s
- @cametv #single up in the middle of nowhere. #lakeofthewoods #cametv #hiking #sony #outdoors #backpacking #film #cinematography #instamood #instatraveling #sierras #camera #cameragear #gimbal #sonya7s #Regrann via Instagram https://www.instagram.com/p/BHgGgWwhUfk/

facebooktwitterpinterestfacebooktwitterpinterest

@tom_antos giving our #cametv #mini3 #gimbal a try with his #Sony #a6300 camera! #CameGimbal #CameMini3 #minisnap3 - Testing out the @cametv Mini 3 camera #gimbal along side 3 other popular #3axisgimbal s #Regrann via Instagram https://www.instagram.com/p/BHfyKb4hg8-/

facebooktwitterpinterestfacebooktwitterpinterest

Vimeo user, Dieter Knüttel uploaded his first test video on the new CAME-Optimus 3-axis gimbal! He filmed it with the Panasonic GH4 and Lumix 12-35mm lens. Dieter, does state in the description of the video that the shaky part at 0:52 seconds is due to his hand touching the seat and not a caused by the Optimus.

The CAME-Optimus is the successor to our very successful CAME-Single gimbal. The Optimus model also features encoders and allows for one hand operation, but with all of the controls and battery now relocated outside of the handle, the single handle can be changed to Dual Handles depending on the camera operator's requirement.  All motors rotate a full 360 degrees without limitation for greater range and flexibility during operation.

CAME-OPTIMUS 3 Axis Gimbal Camera 32bit Boards With Encoders

 

For more information on the CAME-TV Optimus gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-OPTIMUS 3 Axis Gimbal Camera 32bit Boards With Encoders

 

facebooktwitterpinterestfacebooktwitterpinterest

Shout out to @bluskyfilms working with our Came-Mini 3! #CameMini3 #Mini3 #sony #A7S #Zeiss 16-35Check out our website for more Gimbal products and other #DSLR gear! Came-TV.com

#camemini #gimbal from @cametv now available at #potterybarn!... We got some amazing #BluSkyFilms shots and will be posting the edit soon!... thanks again to @potterybarn, @mrcheesycam and @iamretep! via Instagram https://www.instagram.com/p/BHVdaoChVZB/