Author Archives: vision

FacebooktwitterpinterestFacebooktwitterpinterest

Mr.Cheesycam, uploaded this detailed video on how different profiles and settings can affect your CAME Mini 2 gimbal.

The video also has a nice split screen edit that clearly shows what he's doing in the program, so you can follow along with ease.

Screen Shot 2015-07-27 at 2.05.39 PM

Click the picture below for more information on the CAME Mini 2 gimbal.

CAME Mini 2 3-Axis Gimbal

FacebooktwitterpinterestFacebooktwitterpinterest

Youtube user, SWAF Jarrad, posted some quick test footage from his CAME-Single 3-Axis gimbal. In the video, he does mention that he had some trouble in the beginning, but once he changed the lens on his camera, everything was a lot smoother. His setup in the video was a Panasonic GH-4 with a Panasonic 14-140mm lens. Check out his footage below!

Click the picture below for more information on the CAME-Single Gimbal.

CAME-TV Single 3-Axis Gimbal

FacebooktwitterpinterestFacebooktwitterpinterest

Here's a quick test of the CAME-Single that AeroVideo shot with his Sony A7S camera plus a Sony 28-70mm lens.


The new CAME-SINGLE is one of the first commercially available 3-Axis 32-bit basecam controlled gimbals that offer brushless motors with Encoders.The design of the CAME-SINGLE allows the shooter to operate the gimbal with just one hand and has a 1/4-20 and 3/8 threaded mounting point located under the handle.

CAME-Single 3-axis gimbal

Click the picture below for more information on the CAME-Single

CAME-SINGLE 3-Axis Gimbal

FacebooktwitterpinterestFacebooktwitterpinterest

NextWaveDV, put together this quick video of them testing out the new CAME-Single 3-Axis Gimbal with a Sony A7s!

The CAME-Single is equipped with brushless motors that have encoders. The encoders prevent motors from losing synchronization, skipping steps, decreases power consumption, increases Torque, increases the precision of the stabilization and provides important information about frame and camera angles.

CAME-Single 3-Axis Gimbal

 

Click the picture below for more information on the CAME-Single 3-Axis Gimbal.

CAME-Single 3-Axis Gimbal

FacebooktwitterpinterestFacebooktwitterpinterest

Max Snyder, uploaded this short video that shows test footage of him using the CAME-Mini 1 Gimbal for the first time! The wiring and electronics on the CAME-Mini 1 are completely enclosed into the frame, giving a clean professional appearance.

Click the picture below for more information on the CAME-Mini 3-Axis Gimbal.

CAME-TV Mini 3-Axis Gimbal

FacebooktwitterpinterestFacebooktwitterpinterest

The CAME-TV GH-4 Cage is designed specifically for the Panasonic GH-4 and provides easy access to the battery and SD card without actually removing the camera from the cage. The baseplate that comes with the CAME-TV GH-4 Cage has 15mm rod holes that allow you to attach industry standard 15mm rods for accessories like a follow focus.

CAME-TV Panasonic GH-4 Cage(Geekynerddad's GH-4 setup with the CAME-TV GH-4 Cage +Wooden Handles)

Click below for more information on the CAME-TV GH-4 Cage.

CAME-TV Cage For Panasonic GH-4

FacebooktwitterpinterestFacebooktwitterpinterest

The CAME-80T Slider has two solid carbon fiber tubes and a flywheel at one end of the slider giving the shooter a smoother slide.

Tom Antos Using the CAME-80T Slider

The bottom of the CAME-80T has multiple mounting points that will allow you to mount it onto a tripod for a higher slide or with the four adjustable feet, you can get some shots from the ground.

CAME-80T Carbon Fiber Slider

Click the picture below for more information on the CAME-80T Slider.

CAME-80T Carbon Fiber Slider

FacebooktwitterpinterestFacebooktwitterpinterest

Philipp Reinhard, posted this quick video of him trying out his new CAME-Mini 2 gimbal for the first time! He filmed it with the Panasonic GH4 + a Panasonic 14mm Pancake lens.

CAME-Mini 2 3-Axis GimbalClick below for more information on the CAME-Mini 2 gimbal.

CAME-Mini 2 3-Axis Gimbal

 

FacebooktwitterpinterestFacebooktwitterpinterest

Tom Antos, posted this detailed video on his first impressions of the CAME-Mini 2 gimbal. The video not only goes over the specs of the 3-axis gimbal, but it's filled with test footage of him personally using the CAME-Mini 2.

Click below for more information on the CAME-Mini 2 gimbal.

CAME-Mini 2 3-Axis Gimbal

FacebooktwitterpinterestFacebooktwitterpinterest

@mrcheesycam posted a review on some of our #cametv #camera #cages for the #bmpcc #gh4 and #canoncameras...Make sure you check it out!

11358255_964124566960585_1863883671_n

For more information on the CAME-TV Camera Rig Cages click the picture below!

14335579910

FacebooktwitterpinterestFacebooktwitterpinterest

@brianaichlmayr balanced his#red#dragon on the #cametv #carbonfiber#stabilizer

11381442_451325838385829_473073115_n

 

For more information on the CAME Carbon Fiber Stabilizer click the picture below!

CAME-TV Carbon Fiber Stabilizer

FacebooktwitterpinterestFacebooktwitterpinterest

Check out this 3 minute video of some CAME-7800 gimbal test footage by Kyle SHOX Brown FILMS! The CAME-7800 is designed for cameras like the Canon 5Dmk3, Panasonic GH4, and Sony A7. The max weight the CAME-7800 can handle is about 6.5 lbs, so it's perfect for your DSLR type cameras.

Click below for more information on the CAME-7800 3-Axis Gimbal.

CAME-7800 3-Axis Gimbal

FacebooktwitterpinterestFacebooktwitterpinterest

@alpine_entertainment posted his#cametv #mini2 #gimbal balanced for his#sony #a7s

11249053_514657338686111_407043319_n

For more information on the CAME Mini-2 Gimbal click the picture below!

1_came-mini-2-gimbal