Vimeo user, Milton: Motion & Design, posted this video of his first test run right after opening his CAME-Single gimbal!
Click the picture below for more information on the CAME-Single gimbal.
Author Archives: vision
CAME-Mini 2 Gimbal Test By Voyager Video
Voyager Video, posted this quick test of the CAME-Mini 2 gimbal! It was shot with the Sony A7S and a Zeiss 24-70mm lens.
The new CAME-MINI 2 Gimbal is completely tool-less, which allows the operator to quickly change camera setups and re-balance the entire system for optimal performance. All of the wiring and electronics are enclosed into the frame offering a clean professional appearance and also protecting all the wiring.
Click the picture below for more information on the CAME-Mini 2 Gimbal.
Wedding Video Shot Using The CAME-7500 Gimbal By Ken Lauguico
The CAME-7500 3-axis gimbal is designed to compensates for shakes, vibration or any unwanted jitter while shooting, allowing you to capture smoother shots that look like your camera is floating freely. The updated version of the CAME-7500, now includes new quick-release knobs that make it easier to adjust on the roll and yaw axis.
Click the picture below for more information on the CAME-TV 7500 Gimbal.
CAME-Mini 2 Gimbal Settings By Mr.Cheesycam
Mr.Cheesycam, uploaded this detailed video on how different profiles and settings can affect your CAME Mini 2 gimbal.
The video also has a nice split screen edit that clearly shows what he's doing in the program, so you can follow along with ease.
Click the picture below for more information on the CAME Mini 2 gimbal.
CAME-Single Updated Test Footage By SWAF Jarrad
Youtube user, SWAF Jarrad, posted some quick test footage from his CAME-Single 3-Axis gimbal. In the video, he does mention that he had some trouble in the beginning, but once he changed the lens on his camera, everything was a lot smoother. His setup in the video was a Panasonic GH-4 with a Panasonic 14-140mm lens. Check out his footage below!
Click the picture below for more information on the CAME-Single Gimbal.
CAME-Single Gimbal Test By AeroVideo
Here's a quick test of the CAME-Single that AeroVideo shot with his Sony A7S camera plus a Sony 28-70mm lens.
The new CAME-SINGLE is one of the first commercially available 3-Axis 32-bit basecam controlled gimbals that offer brushless motors with Encoders.The design of the CAME-SINGLE allows the shooter to operate the gimbal with just one hand and has a 1/4-20 and 3/8 threaded mounting point located under the handle.
Click the picture below for more information on the CAME-Single
Testing The CAME-Single With A Sony A7s By NextWaveDV
NextWaveDV, put together this quick video of them testing out the new CAME-Single 3-Axis Gimbal with a Sony A7s!
The CAME-Single is equipped with brushless motors that have encoders. The encoders prevent motors from losing synchronization, skipping steps, decreases power consumption, increases Torque, increases the precision of the stabilization and provides important information about frame and camera angles.
Click the picture below for more information on the CAME-Single 3-Axis Gimbal.
CAME-Mini Gimbal Used By Max Snyder
Max Snyder, uploaded this short video that shows test footage of him using the CAME-Mini 1 Gimbal for the first time! The wiring and electronics on the CAME-Mini 1 are completely enclosed into the frame, giving a clean professional appearance.
Click the picture below for more information on the CAME-Mini 3-Axis Gimbal.
CAME-TV GH-4 Cage Review By Geekynerddad
The CAME-TV GH-4 Cage is designed specifically for the Panasonic GH-4 and provides easy access to the battery and SD card without actually removing the camera from the cage. The baseplate that comes with the CAME-TV GH-4 Cage has 15mm rod holes that allow you to attach industry standard 15mm rods for accessories like a follow focus.
(Geekynerddad's GH-4 setup with the CAME-TV GH-4 Cage +Wooden Handles)
Click below for more information on the CAME-TV GH-4 Cage.
CAME-80T Slider Review By Tom Antos
The CAME-80T Slider has two solid carbon fiber tubes and a flywheel at one end of the slider giving the shooter a smoother slide.
The bottom of the CAME-80T has multiple mounting points that will allow you to mount it onto a tripod for a higher slide or with the four adjustable feet, you can get some shots from the ground.
Click the picture below for more information on the CAME-80T Slider.
CAME-Mini 2 Test By Philipp Reinhard
Philipp Reinhard, posted this quick video of him trying out his new CAME-Mini 2 gimbal for the first time! He filmed it with the Panasonic GH4 + a Panasonic 14mm Pancake lens.
Click below for more information on the CAME-Mini 2 gimbal.
CAME-Mini 2 Review By Tom Antos
Tom Antos, posted this detailed video on his first impressions of the CAME-Mini 2 gimbal. The video not only goes over the specs of the 3-axis gimbal, but it's filled with test footage of him personally using the CAME-Mini 2.
Click below for more information on the CAME-Mini 2 gimbal.
Instagram Post By mrcheesycam
@mrcheesycam posted a review on some of our #cametv #camera #cages for the #bmpcc #gh4 and #canoncameras...Make sure you check it out!
For more information on the CAME-TV Camera Rig Cages click the picture below!
Instagram Post By brianaichlmayr
@brianaichlmayr balanced his#red#dragon on the #cametv #carbonfiber#stabilizer
For more information on the CAME Carbon Fiber Stabilizer click the picture below!
CAME-7800 Gimbal Test By Kyle SHOX Brown FILMS
Check out this 3 minute video of some CAME-7800 gimbal test footage by Kyle SHOX Brown FILMS! The CAME-7800 is designed for cameras like the Canon 5Dmk3, Panasonic GH4, and Sony A7. The max weight the CAME-7800 can handle is about 6.5 lbs, so it's perfect for your DSLR type cameras.
Click below for more information on the CAME-7800 3-Axis Gimbal.
