The CAME-TV FS7 Cage is designed specifically for the Sony FS7 camera, allowing you to mount multiple useful accessories to the cage itself that will help your shooting experience. The FS7 Cage has two rosette mounting points(one on each side), which gives you the option to mount the FS7's remote control grip directly to the cage.
BBW Production, shot this short video of the "Speedtest Glassdrive Racing" Event entirely on the CAME-7800 Gimbal!
With a max payload of roughly 6.6 pounds, the CAME-7800 Gimbal is designed for cameras like the 5Dmk3, GH4 or the Sony A7s.
In this beautifully shot video, Scotty Ray, traveled to Yosemite National Park to hike up "Half-Dome". He brought along the CAME-Single Gimbal to document his trip and was able to piece together this video.
"I used the CAME-Single over other gimbals because of its size and reliability. It does everything I need and fits inside my normal DSLR bag. It's a great overall gimbal.
For the video, I used a Sony A7s with a Sony 16-35 Zeiss version lens. The video was shot in one day which took about 14 hours without having to charge the CAME-Single."
-Scotty Ray
The CAME-Single is a one handed 3-axis gimbal featuring motor encoders that prevent the motors from losing synchronization and skipping steps, decreases power consumption, increases precision of stabilization, and more. The CAME-Single is perfect for small mirrorless cameras such as the Panasonic GH4, Sony A7s or A7RII, and BlackMagic Pocket Cinema Camera. With the upgraded battery, the gimbal can run up to 20 hours on a single charge.
FocusPulling (.com), uploaded this video about getting some extra battery power for your camera. He goes through a bunch of gear that you might need and if you skip to around the 07:32 mark in the video, he goes over the specs of the CAME-TV VM02 V-Mount Plate.
The CAME-TV VM02 V-Mount Plate offers 12V, 7.2V and 5v outputs and comes with an industry standard 15mm rail mount, so that mounting it to your rig is a breeze.
You4reel, shot this huge Corona sponsored event in Ireland with the CAME-TV 7800 Gimbal! The CAME-7800 is a 3-axis gimbal designed for cameras like the Canon 5Dmk3, Canon 5Dmk2, Canon 7D and even the Panasonic GH-4.
The CAME-7800 features a clean design that hides all of the wires to ensure they don't get damaged while it's being used. The 7800 Gimbal, also gives the shooter multiple operation modes that can easily be switched by pressing the joystick.
Recently, Vimeo user, Kluzo, used the CAME-7800 gimbal to cover an event in Paris!
The CAME-7800 uses three motors that stabilize the camera along with the pan, tilt, and roll axis. The motors will help compensate for shakes, vibrations, and other unwanted movements, allowing you to get some smooth shots.
In this quick video posted by Youtube user, Joe Taravella, he takes his new CAME-Single gimbal out for a test run! The footage looks great, especially when he walks up and down the stairs. He used his Sony A7S with a Sony 10-18mm F4 lens.The new CAME-Single is one of the first commercially available 3-Axis 32-bit basecam controlled gimbals that offer brushless motors with Encoders.
The CAME-Steadicam can hold camera setups that are roughly 5 to 33 pounds with a minimum height of 27.5 inches and a max of 40 inches. The CAME-Steadicam comes equipped with a baseplate that has a Power, AV and HDMI connector. You also have the option to buy the stabilizer and the vest separately or as a package.
Voyager Video, posted this quick test of the CAME-Mini 2 gimbal! It was shot with the Sony A7S and a Zeiss 24-70mm lens.
The new CAME-MINI 2 Gimbal is completely tool-less, which allows the operator to quickly change camera setups and re-balance the entire system for optimal performance. All of the wiring and electronics are enclosed into the frame offering a clean professional appearance and also protecting all the wiring.