Author Archives: vision

•

Youtube user, Ed Rakel, posted this quick video of him using his new CAME-Single Gimbal with a Panasonic GH-4 + Olympus 12 mm f2.0.
The CAME-Single is designed around the idea of being able to operate a gimbal with just one hand. It's 3-axis with a 32-bit board and the brushless motors have encoders, making it the first basecam controlled gimbal on the market with encoders. The max payload the CAME-Single can handle is 2.6lbs and is designed for smaller cameras like the Sony A7s, Panasonic GH4 or the Blackmagic Pocket Cinema Camera.

CAME-Single 3-axis Gimbal
Click below for more information on the CAME-Single 3-Axis Gimbal.

CAME-Single 3-Axis Gimbal

Related Posts:

•

Scotty Ray from Satostudiogear, posted a video a little bit ago of his hike up the famous "Half Dome" in Yosemite National Park. He recently uploaded this video of his review of the CAME-Single and mentions how he was able to pull off some of the camera shots he was able to capture in his Yosemite video.

"It was awesome to be able to pull a gimbal out of your backpack and have it up and running in 30 seconds... I also attached the Gimbal to the top of my Tripod by removing the manfrotto head. This is useful for shots you can't normally reach, or over tall cliffs " -Scotty Ray

If you haven't seen his "Half Dome" Yosemite video, make sure to check it out below!

Click below for more information on the CAME-Single 3-Axis Gimbal.

CAME-Single 3-Axis Gimbal

Related Posts:

•

Sean J Vincent, posted this detailed review on the CAME-Mini 2 Gimbal after using the gimbal on a current web series he's working on.

The CAME-Mini 2 is a completely tool-less 32-bit 3-axis gimbal with dual IMU sensors that can hold camera setups that are no more than 1kg(roughly, 2.2 pounds). It's powered by four rechargeable 18650 batteries that are placed in the horizontal cross bar of the Mini 2. A new "Stop Ring" has beed added to the Mini 2, preventing the roll motor from over rotating, which may cause the internal wires to become tangled.

CAME-Mini 2 3-Axis Gimbal

Click below for more information on the CAME-Mini 2 Gimbal.

CAME-Mini 2 3-Axis Gimbal

Related Posts:

•

Cinema5D, passed by the CAME-TV booth during IBC 2015 and shot this quick interview with one of our representatives about the CAME-Single gimbal!

The CAME-Single is a 3-axis gimbal that has extremely accurate readings because of the encoders that are built into the motor. The CAME-Single has a built in battery in the handle itself that you can charge by plugging the charging cable directly to the handle. There's a 1/4-20" mounting point on the side of the handle and a 3/8" along with another 1/4-20" mounting point on the bottom of the handle.

CAME-Single 3-Axis Gimbal

Click below for more information on the CAME-Single gimbal.

CAME-Single 3-Axis Gimbal

Related Posts:

•

In this video, Laurent Briere, used the CAME-Single to shoot this video that highlights a marathon at the royal city of Blois!
That CAME-Single is a 3-axis 32-bit basecam controlled gimbal that is completely tool-less, making it extremely easy to balance your camera. Currently, the CAME-Single is the first basecam controlled gimbal to offer brushless motors with encoders for highly accurate readings of the motors position. The sixth round of pre-orders are currently being accepted and should be shipping out around September 20, 2015.

CAME-Single 3-Axis Gimbal

Click below for more information on the CAME-Single Gimbal.

CAME-Single 3-Axis gimbal

 

Related Posts:

•

MrCheesyCam, posted this quick review on the new CAME-TV Sony A7RII Cage.

With the recent release of the long awaited Sony A7RII camera, the CAME-TV A7RII Cage is designed specifically for the A7RII to fit snug in the cage itself. It's CNC machined from aluminum making it lightweight, but also extremely strong. The base plate and the top handle thats included with the A7RII Cage, has industry standard 15mm rod mounting points for attaching accessories like a follow focus and/or a matte box.

CAME-TV Sony A7RII Cage

Click below for more information on the new CAME-TV Sony A7RII Cage.

CAME-TV Sony A7RII Cage

Related Posts:

•

Premini, recently uploaded his first CAME-Mini 2 Gimbal test on Vimeo! No post stabilization was added and he did a quick color grade. He filmed the whole thing with a BMPCC + a Kern Paillard Switar 10mm lens.

The CAME-Mini 2 is a tool-less 3-axis gimbal that is built to work with lightweight cameras.  All of the wiring is enclosed in the frame itself, making sure that the wiring doesn't get damaged while it's being used. The Mini 2 is completely powered by four 18650 rechargeable batteries that you insert into the gimbals horizontal cross bar.

CAME-Mini 2 3-Axis Gimbal

Click below for more information on the CAME-Mini 2 3-Axis Gimbal.

CAME-Mini 2 3-Axis Gimbal

Related Posts:

•

Vimeo user, PigMintFilm, posted this wedding video that was shot using the CAME-Single Gimbal of the Bride and Groom's first choreographed dance. The video was shot with a Sony A7S + Sony 16mm F/2.8 lens.
The CAME-Single is a 3-axis basecam controlled gimbal that has brushless motors with encoders, which allows highly accurate monitoring of the motors position. The CAME-Single comes with a hard case for storage and a battery charger that you plug into the handle.

CAME-Single 3-Axis Gimbal

 

Click below for more information on the CAME-Single 3-Axis Gimbal.

CAME-Single 3-Axis Gimbal

Related Posts:

•

Lucky Punch Productions, recently uploaded this review of the CAME-TV 1092D Ultra Slim LED Light Panel.

CAME-TV Ultra Slim LED 1092D Daylight LED Panel is extremely lightweight and portable, making it an amazing accessory for any photo, video, or film production. All CAME-TV Ultra Slim LED Lighting Panels are powered through industry standard Sony batteries (NP-F or V-Mount), which makes them perfect for both studio and remote location productions. The Ultra Slim Lights are available in both daylight and bi-color.

CAME-TV 1092D Daylight Ultra Slim Led Light Panel

 

 

Click below for more information on the CAME-TV Ultra Slim LED Light Panels.

CAME-TV 1092D Daylight Ultra Slim Led Light Panel

Related Posts:

•

Vimeo user, Dieter Knüttel, uploaded this three part CAME-Single review. The first part is an overview and an unboxing, the second is a driving test and the third is labeled "Action Scenes" where he shows how the CAME-Single handles during some running situations.

PART 1: Unboxing And Overview

PART 2: Driving Test

PART 3: Action Scenes With A Dog

The CAME-Single has a max payload of about 2.6 pounds and can work with small cameras like the Sony A7s, Panasonic GH-4 and the BMPCC. The new updated version of the CAME-Single has internal batteries located in the handles that produce higher voltage for more power and stability.

Click below for more information on the CAME-Single 3-Axis Gimbal.

CAME-Single 3-Axis Gimbal

 

 

 

Related Posts:

•

Dan Chung from NewsShooter.com, posted an interview that was filmed at the CAME-TV booth at the BIRTV show in Beijing. The video gives a quick rundown on the specs and profiles of the CAME-Mini 2 Gimbal.

The CAME-Mini 2 is completely tool-less, allowing the operator to change camera setups and re-balance the entire system on the fly. A quick release system has been added to the MINI 2 Gimbal making it easier for the shooter to detach the camera from the gimbal.

CAME-Mini 2 3-Axis Gimbal

Click below for more information on the CAME-Mini 2 3-Axis Gimbal.

CAME-Mini 2 3-Axis Gimbal

Related Posts:

•

Everything Steadicam, used the CAME-Single to shoot this intense video that showcases some of the beach workouts that Rawmana Fitness has to offer.

The CAME-Single is a 3-axis gimbal that is made primarily for those "on-the-go" shooters who want a quick one-handed setup. With it's built in joystick, it will allow you to easily pan and tilt while the gimbal is in motion or stationary. The 1/4-20" mounting point on the side of the CAME-Single's handle gives the shooter the option to mount a monitor or a smartphone.

CAME-Single 3-Axis Gimbal

 

Click below for more information on the CAME-Single 3-Axis Gimbal.

CAME-Single 3-Axis Gimbal

Related Posts:

•

Youtube user, Yakir Yahish, posted a new video of him testing out the CAME-Single Gimbal at a Church in Israel.

The CAME-Single is one of the first one-handed gimbals that uses brushless motors with encoders. It has a high voltage internal battery built into the handle that gives the CAME-Single more power and stability with a run time of roughly 20 hours. Also, if you haven't seen Yakir Yahish, other CAME-Single test check it out below.

Click below for more information on the new CAME-Single 3-Axis Gimbal.

CAME-Single 3-Axis Gimbal

Related Posts:

•

Recently, Satostudiogear, uploaded this quick and detailed review of the CAME-TV FS7 Cage!

The CAME-TV FS7 Cage is designed specifically for the Sony FS7 camera, allowing you to mount multiple useful accessories to the cage itself that will help your shooting experience. The FS7 Cage has two rosette mounting points(one on each side), which gives you the option to mount the FS7's remote control grip directly to the cage.

CAME-TV Sony FS7 Cage

Click below for more information on the CAME-TV FS7 Cage!

CAME-TV Sony FS7 Cage

Related Posts:

•

BBW Production, shot this short video of the  "Speedtest Glassdrive Racing" Event entirely on the CAME-7800 Gimbal!
With a max payload of roughly 6.6 pounds, the CAME-7800 Gimbal is designed for cameras like the 5Dmk3, GH4 or the Sony A7s.

CAME-TV 7800 3-Axis Gimbal

Click below for more information on the CAME-7800 3-Axis Gimbal.

CAME-7800 3-Axis Gimbal

Related Posts: