Here's a quick test of the CAME-Single that AeroVideo shot with his Sony A7S camera plus a Sony 28-70mm lens.
The new CAME-SINGLE is one of the first commercially available 3-Axis 32-bit basecam controlled gimbals that offer brushless motors with Encoders.The design of the CAME-SINGLE allows the shooter to operate the gimbal with just one hand and has a 1/4-20 and 3/8 threaded mounting point located under the handle.
Click the picture below for more information on the CAME-Single
| Encoders | Tool-less |
| This technology prevent motors from losing synchronization, skipping steps and more. | 32-bit controller used for the construction of high quality 3-axis camera stabilizing systems. |
| Design | Battery Life |
| The design of the CAME-SINGLE allows for one hand operation. | Batteries can operate up 10 hours when fully charged. |
ENCODERS ARE OFTEN USED IN ROBOTICS FOR HIGHLY ACCURATE MONITORING OF MOTOR POSITION
YOU MIGHT BE INTERESTED IN THESE OTHER GIMBALS
 |
 |
 |
| CAME-MINI 2 Tool-less |
CAME-8000 Tool-less |
CAME-7800 Tool-less |
| The new MINI2 is completely tool-less which allows the operator to change camera setups.... | A handheld stabilizer designed for camera systems weighing up to 11 pounds, making it suitable for... | Designed for camera systems such as Canon 5D3, Canon 5D2, Canon 7D, Panasonic GH4, and Sony A7... |
 |
|
|
NextWaveDV, put together this quick video of them testing out the new CAME-Single 3-Axis Gimbal with a Sony A7s!
The CAME-Single is equipped with brushless motors that have encoders. The encoders prevent motors from losing synchronization, skipping steps, decreases power consumption, increases Torque, increases the precision of the stabilization and provides important information about frame and camera angles.
Click the picture below for more information on the CAME-Single 3-Axis Gimbal.
Max Snyder, uploaded this short video that shows test footage of him using the CAME-Mini 1 Gimbal for the first time! The wiring and electronics on the CAME-Mini 1 are completely enclosed into the frame, giving a clean professional appearance.
Click the picture below for more information on the CAME-Mini 3-Axis Gimbal.
The CAME-TV GH-4 Cage is designed specifically for the Panasonic GH-4 and provides easy access to the battery and SD card without actually removing the camera from the cage. The baseplate that comes with the CAME-TV GH-4 Cage has 15mm rod holes that allow you to attach industry standard 15mm rods for accessories like a follow focus.
(Geekynerddad's GH-4 setup with the CAME-TV GH-4 Cage +Wooden Handles)
Click below for more information on the CAME-TV GH-4 Cage.
The CAME-80T Slider has two solid carbon fiber tubes and a flywheel at one end of the slider giving the shooter a smoother slide.
The bottom of the CAME-80T has multiple mounting points that will allow you to mount it onto a tripod for a higher slide or with the four adjustable feet, you can get some shots from the ground.
Click the picture below for more information on the CAME-80T Slider.
Philipp Reinhard, posted this quick video of him trying out his new CAME-Mini 2 gimbal for the first time! He filmed it with the Panasonic GH4 + a Panasonic 14mm Pancake lens.
Click below for more information on the CAME-Mini 2 gimbal.
Tom Antos, posted this detailed video on his first impressions of the CAME-Mini 2 gimbal. The video not only goes over the specs of the 3-axis gimbal, but it's filled with test footage of him personally using the CAME-Mini 2.
Click below for more information on the CAME-Mini 2 gimbal.
@mrcheesycam posted a review on some of our #cametv #camera #cages for the #bmpcc #gh4 and #canoncameras...Make sure you check it out!
For more information on the CAME-TV Camera Rig Cages click the picture below!
@brianaichlmayr balanced his#red#dragon on the #cametv #carbonfiber#stabilizer
For more information on the CAME Carbon Fiber Stabilizer click the picture below!
Check out this 3 minute video of some CAME-7800 gimbal test footage by Kyle SHOX Brown FILMS! The CAME-7800 is designed for cameras like the Canon 5Dmk3, Panasonic GH4, and Sony A7. The max weight the CAME-7800 can handle is about 6.5 lbs, so it's perfect for your DSLR type cameras.
Click below for more information on the CAME-7800 3-Axis Gimbal.
@cjfrazier shooting an interview with some #cametv #led #light #panels!
For more information on the CAME-TV LED Light Panels click the picture below!
@csproductions87 shooting some test footage with the #cametv #7500#gimbal!
For more information on the CAME 7500 Gimbal click the picture below!
@alpine_entertainment posted his#cametv #mini2 #gimbal balanced for his#sony #a7s
For more information on the CAME Mini-2 Gimbal click the picture below!
@philippreinhard recently received his #cametv #mini2 #gimbal!
For more information on the CAME Mini-2 Gimbal click the picture below!
