Tag Archives: 3-axis gimbal

•

BTS shot of @eriknaso filming with his #cametv #single #3axis #gimbal and #Sony #a6300 setup!
・・・
Working a very top heavy a6300 on the Came-tv single. It barely works but the shots turned out great. #a6300 #cametv #videoproduction #bts #sony #gimbal #filmmaking via Instagram http://ift.tt/1WDtG5q

Related Posts:

•

Johnnie Behiri, from Cinema5D, passed by our booth at the NAB 2016 Show to interview us about the brand new CAME-TV Optimus gimbal we showcased at the convention!

The CAME-Optimus is the successor to our very successful CAME-SINGLE gimbal. The Optimus model also features encoders and allows for one hand operation, but with all of the controls and battery now relocated outside of the handle, the Single handle can be changed to Dual Handles depending on the camera operator's requirement. All motors  on the Optimus rotate a full 360 degrees without limitation for greater range and flexibility during operation.

CAME-OPTIMUS 3 Axis Gimbal Camera 32bit Boards With Encoders

For more information on the CAME-TV Optimus gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-OPTIMUS 3 Axis Gimbal Camera 32bit Boards With Encoders

Related Posts:

•

@murilloskm shooting some footage in Brazil with his #cametv #single #gimbal and #Sony #a7sii! #CameGimbal #CameSingle
・・・
Primeiro do dia !
#gimbal #Cametv #sony #a7sii #sp011 #2016 via Instagram http://ift.tt/1rSHCLP

Related Posts:

•

Youtube user, Navajo Productions, decided to take the CAME-TV Single and his Sony a6300 camera to the streets to see how well they work together. He used the Sony a6300 16-55mm kit lens.

The CAME-Single is a 3-axis 32-bit gimbal that is designed to be used with just one hand. The Single comes with encoders built into the motors, which prevents the motors from losing sync, skipping steps and it decreases power consumption - giving the gimbal a longer battery life. The Dual Gimbal Handles provide gimbal operators smooth camera panning and tilt motions.The handles can also be configured to act as a stand when the handles are positioned right angled to the cross bar.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders
For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-Single 3 Axis Gimbal Camera 32bit Boards With Encoders

Related Posts:

•

@feedbackloopproductions filming with the #cametv #single #gimbal and #sony #a7s on a recent project he's working on! #atomos #monitor ・・・
@stefangelion hard at play!
New project on the go
#shortfilm #filmproduction #panasoniclumix #blackmagic #gimbal #atomos #cametv via Instagram http://ift.tt/1TTV1tb

Related Posts:

•

@lakeeffectmedia filming some nice cars with his #cametv #ARGO #3axis #gimbal setup for his #Canon #5dmk2! ・・・
Chilling at @_european_experience_ with the #cametv
.
.
#euro #car #stance #vw #audi #bmw #turbo #lowered #bagged #sowo via Instagram http://ift.tt/1OwH9n6

Related Posts:

•

@slmedia filming a wedding with his #cametv #single #gimbal setup for his #panasonic #gh4! Also using a #gopro attached to the hand grip for a wide angle
・・・
Filming a wedding and loving this set up! 3 axis @cametv gimbal with a GH4 for the close up shot and ah @gopro for the wide shot! all at once all with one hand. #Runandgun #weddingfilms #weddingsmm via Instagram http://ift.tt/27l5KqT

Related Posts:

•

Vimeo user, BlackStunt Prod uploaded his latest demo reel that showcases a bunch of his most recent work. Most of the tracking shots that are in the demo reel were shot with the CAME-TV ARGO Gimbal!

BlackStunt Prod, filmed his projects with the Canon 70D with multiple lenses: the Canon 10-22mm, Canon 50mm f1.8 and a the Canon 24-70mm f2.8. He does mention that he also used a handheld stabilizer for some of the other shots. The CAME-ARGO features a 32 bit Alexmos board and is completely tool-less. All of the motors are equipped with encoders, which increases the overall performance of the ARGO and makes the battery last a lot longer.CAME-TV ARGO 3-Axis Gimbal

The entire top handle bar can easily be separated from the gimbal, which than can be mounted to other devices like a crane, slider or drone with the included adapter plate.

For more information on the CAME-ARGO click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV ARGO 3-Axis Gimbal

 

Related Posts:

•

@murilloskm's #cametv #single #3axis #gimbal setup with his #sonya7sii & #sony #28mm lens!
・・・
Se liga no brinquedo , pode guardar o osmo !
#a7sII #gimbal #singlegimbal #cametv #sp011 #2016 via Instagram http://ift.tt/24P3TZ1

Related Posts:

•

@you4reel on set shooting with his #cametv #7800 #gimbal and #panasonic #gh4!
・・・
we're shooting today with our @cametv #7800 flying our #Panasonic #gh4 via Instagram http://ift.tt/1T8CSMn

Related Posts:

•

Newsshooter.com passed by our booth at NAB 2016 and did a few interviews on some of the new products we were showcasing at the convention. In this interview, we show him our brand new CAME-TV Prodigy 3-Axis Gimbal!

The CAME-Prodigy gimbal is the physically largest in our gimbal family. This is a replacement for the CAME-8000, which is a great platform for larger cameras and lenses. The new Prodigy is running the latest 32-bit Controller with encoder technology for enhanced stability and battery efficiency. The Prodigy is currently available for pre-order and we are expected to ship the first round of pre-orders around June 20th, 2016.

CAME-TV Prodigy 3-Axis Gimbal

 

For more information on our CAME-TV Prodigy click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV Prodigy 3-Axis Gimbal

Related Posts:

•

Youtube user, Mr Mikey Davies, uploaded this quick test video of our new CAME-Mini 3 3-axis gimbal! The video was shot with his Sony A7s camera.

The CAME-Mini 3 is our latest edition to the CAME-MINI Gimbal Series. The new Mini 3 uses basecam 32 bit controllers with encoders. All of the wiring and electronics are completely enclosed into the frame, offering a clean professional appearance and protecting the wiring. The top handle on the Mini 3 can be removed, each side handle can also be removed, and the entire top cross bar can be separated from the lower frame allowing for compact transport.

CAME-TV Mini 3 3-Axis Gimbal

For more information on the CAME-TV Mini 3 gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV Mini 3 3-Axis Gimbal

Related Posts:

•

BTS of @satostudios filming a billboard release video with the #cametv #optimus #gimbal and #sony #a7sii!

Related Posts:

•

@mrcheesycam & @bluskyfilms
out shooting a real estate video with the #cametv #optimus #gimbal! #panasonic #gh4 ・・・
Another Multi-Million Dollar #RealEstateListing knocked out with @bluskyfilms today. The new @cametv #Optimus #Gimbal has been a solid workhorse on many of these projects in the last few weeks. Paired with a #GH4 + 7-14mm lens, it provides super fast smooth dynamic wide angle shots. Several hours on a single battery means no stopping until the projects are done. #cametv #Stabilizer #bluskyfilms via Instagram http://ift.tt/1rSdBeF

Related Posts:

•

@growafanbase filming an interview with his #cametv #single #gimbal and #RODEmic #ntg4!
・・・
Out shooting videos for @the_farmery at @rtpfrontier today! Great people and delicious food! Using the gh4 with rode ntg4+ and came-tv single gimbal. #gh4 #cametv #rodemic #4k #videoproduction #professional #killinit #growyourfanbase via Instagram http://ift.tt/1TBaC0F

Related Posts: