Vimeo user, Remo Chapeaublanc, uploaded this quick video of him testing out the CAME-Single Gimbal for the first time with his Sony A7RII and 16mm F/2.8 lens.
The size of the CAME-Single is perfect for mirror-less cameras like the GH4, A7s and A7RII. The quick release plate on the CAME-Single is completely tool-less making balancing your camera on the gimbal a breeze. Due to the encoder technology on the CAME-Single, stabilization is more precise and information about the frame and camera angles are more accurate.
Vitographyy, uploaded this short video of some footage he shot using one of our CAME-TV gimbals at the "86 Fest" car show. CAME-TV gimbals are completely 3-axis and offer multiple operation modes to suit the shot in which you are trying to achieve. There are different types of CAME-TV gimbals that can hold cameras like the GoPro to heavy duty cameras like the BlackMagic Production Camera.
For more information on the different type of CAME-TV Gimbal click below.
Vimeo user, De Rienzo Films, went out to Trafalgar Square in London and grabbed some shots with his Panasonic GH3 with a 14mm pancake lens balanced on a CAME-Single 3-Axis Gimbal.
The CAME-Single is a handheld gimbal that is made for smaller cameras like the Sony A7s, BMPCC or the Panasonic GH3/GH4. The brushless motors with encoders, prevent the motors from being out of sync and can give you detailed information about the frame and the angle of your camera. The internal rechargeable batteries are fitted inside the handle of the CAME-Single itself, making it easier to plug-in and charge.
Youtube user, DayZeroSurvivors, uploaded this quick test of him putting the CAME-Single through a running test with his Panasonic GH-4 + Lumix G X Vario PZ 14-42mm lens.
The CAME-Single has a larger frame than most pistol-grip style gimbals, allowing you to fully tilt up and down. The brushless motors are also significantly larger and have encoders built in them for more accurate motor readings. The CAME-Single has a run time of about 20 hours when the battery is fully charged.
Vimeo user, Valdas Kotovas, posted this quick video of him using the CAME-Single with his Sony A7s camera and Sony 24-70mm lens.
The CAME-Single gimbal is the first commercially available basecam controlled gimbal that offers brushless motors with encoders. Encoders are usually used in robotics to get extremely accurate monitoring of the positions of the motors. The CAME-Single is tool-less, making it easy to balance your camera while it's on the gimbal.
Youtube user, Ed Rakel, posted this quick video of him using his new CAME-Single Gimbal with a Panasonic GH-4 + Olympus 12 mm f2.0.
The CAME-Single is designed around the idea of being able to operate a gimbal with just one hand. It's 3-axis with a 32-bit board and the brushless motors have encoders, making it the first basecam controlled gimbal on the market with encoders. The max payload the CAME-Single can handle is 2.6lbs and is designed for smaller cameras like the Sony A7s, Panasonic GH4 or the Blackmagic Pocket Cinema Camera.
Scotty Ray from Satostudiogear, posted a video a little bit ago of his hike up the famous "Half Dome" in Yosemite National Park. He recently uploaded this video of his review of the CAME-Single and mentions how he was able to pull off some of the camera shots he was able to capture in his Yosemite video.
"It was awesome to be able to pull a gimbal out of your backpack and have it up and running in 30 seconds... I also attached the Gimbal to the top of my Tripod by removing the manfrotto head. This is useful for shots you can't normally reach, or over tall cliffs " -Scotty Ray
If you haven't seen his "Half Dome" Yosemite video, make sure to check it out below!
Cinema5D, passed by the CAME-TV booth during IBC 2015 and shot this quick interview with one of our representatives about the CAME-Single gimbal!
The CAME-Single is a 3-axis gimbal that has extremely accurate readings because of the encoders that are built into the motor. The CAME-Single has a built in battery in the handle itself that you can charge by plugging the charging cable directly to the handle. There's a 1/4-20" mounting point on the side of the handle and a 3/8" along with another 1/4-20" mounting point on the bottom of the handle.
In this video, Laurent Briere, used the CAME-Single to shoot this video that highlights a marathon at the royal city of Blois!
That CAME-Single is a 3-axis 32-bit basecam controlled gimbal that is completely tool-less, making it extremely easy to balance your camera. Currently, the CAME-Single is the first basecam controlled gimbal to offer brushless motors with encoders for highly accurate readings of the motors position. The sixth round of pre-orders are currently being accepted and should be shipping out around September 20, 2015.
The CAME-Single is one of the first one-handed gimbals that uses brushless motors with encoders. It has a high voltage internal battery built into the handle that gives the CAME-Single more power and stability with a run time of roughly 20 hours. Also, if you haven't seen Yakir Yahish, other CAME-Single test check it out below.
In this quick video posted by Youtube user, Joe Taravella, he takes his new CAME-Single gimbal out for a test run! The footage looks great, especially when he walks up and down the stairs. He used his Sony A7S with a Sony 10-18mm F4 lens.The new CAME-Single is one of the first commercially available 3-Axis 32-bit basecam controlled gimbals that offer brushless motors with Encoders.
Encoders are often used in Robotics for highly accurate monitoring of motor position. Some of the benefits of using Encoders are to: prevent motors from losing synchronization and skipping steps, provides important information about frame and camera angles, decreases power consumption (longer battery life), increases Torque, increases precision of stabilization, and more.
Currently our only gimbal with motor encoders is our CAME-Single.