Unlike the Mini 1 and Mini 2, the new Mini 3 uses basecam 32-bit controllers with encoders. The new smart battery is quick and easy to install and provides up to 10 hours of runtime(depending on your setup). The top handle on the Mini 3 can be removed, each side handle can also be removed, and the entire top cross bar can be separated from the lower frame allowing for compact transport.
MrCheesycam, uploaded this short overview video that goes over the recent changes to the batteries for our CAME-ARGO and Mini-3 Gimbals!
The CAME-Mini 3 has all the wiring and electronics completely enclosed into the frame, offering a clean professional appearance and protecting the wiring. For easy transportation & storage the side handles on the Mini-3 are completely removable.
The CAME-ARGO has encoders on all of the motors, which makes the ARGO's performance more smooth and accurate - along with increasing the lifespan of the battery. The entire top handle bar can be easily separated from the gimbal which than can be mounted to other devices like a crane, slider or drone with the included adapter plate.
Youtube user, GlainKanVision posted this quick test video of him testing out his CAME-Single gimbal paired with the Sony a6300 camera!
The CAME-Single is a 3-axis 32-bit gimbal that is designed to be used with just one hand. The Single comes with encoders built into the motors, which prevents the motors from losing sync, skipping steps and it decreases power consumption - giving the gimbal a longer battery life. The Dual Gimbal Handles provide gimbal operators smooth camera panning and tilt motions.
The CAME-Prodigy gimbal is our largest 3-axis gimbal in our gimbal family. The Prodigy is designed to hold large camera setups and its replacing our old CAME-8000 gimbal. The gimbal is running the latest 32-bit Controller with Encoder Technology for enhanced stability and battery efficiency. The maximum payload the Prodigy can handle is roughly 11 lbs./4.9 kg, making it perfect for the BMCC, CANON C100/C300, RED EPIC, CANON 5D Series/7D Series, etc.
Vimeo user, 6ème Droite uploaded this beautifully shot real estate video that was filmed with the CAME-Single & Sony a6300!
The CAME-Single offers full 3-axis stabilization with a built-in joystick and brushless motors with encoders. With the Single now including the new Dual Gimbal Handles, it provides the gimbal operators with smooth camera panning and tilt motions. The CAME-Single has an internal battery that will allow it to operate for up to 20 hours.
#pentax645z @rodemic video micro #Regrann via Instagram https://www.instagram.com/p/BJjGCxTBk9I/
The Optimus model features encoders and allows for one hand operation, but with the controls and battery now relocated outside of the handle, the single handle can be changed to dual handles. Another exciting feature is that all the motors on the Optimus can rotate a full 360 degrees without limitation for greater range and flexibility during operation.
Vimeo user, Stephane Kiss uploaded this short montage video that shows some of the highlights from last years "Burning Man" event. It was filmed with the CAME-Mini 2 gimbal paired with the Sony A7sII! Stephane, used multiple lenses to shoot the video - The Sony 35mm f1.4, Sony 24-70mm f4 & Sony 10-18mm.
The Mini 2 is completely tool-less, which will make it easier for you to balance your camera or to make minor adjustments. The max payload the CAME-Mini 2 can handle is 2.6 lbs, making it perfect for cameras like the BMPCC, Panasonic GH4 and the Sony A7S/A7R series. The CAME-Mini 2 3-axis gimbal is an extremely portable gimbal that can easily be brought with you to different shoots.