Our CAME-TV Mini 99 Lightweight Battery has a capacity of 99Wh and pairs well with smaller cameras! The lightweight Mini 99 battery can be hung to light stands via the included lanyard, so you don't have to worry about where to place it during shoots. The Mini 99 features 2 D-Tap and 1 USB power outputs.
The D-Tap output can be used to power lights, monitors, recorders, or other accessories. The USB port gives you a convenient way to charge your smartphone or other USB items.
We now have the popular Samsung 18650 rechargable batteries that are used to power a variety of electronics and camera gear like certain 3-axis gimbals. An 18650 charger is also included when purchasing our 18650 batteries!
Need a compact battery solution for your camera & accessories? Don't forget to check out our #Cametv #Compact #Vmount #Battery series! Find them at cametvgear.com! #CameVmount #VmountBattery via Instagram https://www.instagram.com/p/BLRXxjZhj8o/
@mrcheesycam has been putting our #Cametv #vmount batteries to good use w/ his #UrsaMini! #Blackmagic #Ursa #Mini #CameVmount #VmountBattery - Shorter in height, slimmer, and lighter than your average cells. These are the new @cametv 'Compact V-Mount Batteries'. Available in 65wh, 95wh, 120wh, and 130wh. Been rockin' these for a while on #UrsaMini and is great to fly on the gimbal with, or run handheld as the compact design shaves off a pound or more over other common batteries. #Regrann via Instagram https://www.instagram.com/p/BK_kvvkhW6C/
MrCheesycam, uploaded this short overview video that goes over the recent changes to the batteries for our CAME-ARGO and Mini-3 Gimbals!
The CAME-Mini 3 has all the wiring and electronics completely enclosed into the frame, offering a clean professional appearance and protecting the wiring. For easy transportation & storage the side handles on the Mini-3 are completely removable.
The CAME-ARGO has encoders on all of the motors, which makes the ARGO's performance more smooth and accurate - along with increasing the lifespan of the battery. The entire top handle bar can be easily separated from the gimbal which than can be mounted to other devices like a crane, slider or drone with the included adapter plate.
For more information on the CAME- Mini 3 & the CAME-ARGO gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.
If you recently received a brand new CAME-Single battery to replace your old one, but are unsure of how to install it, feel free to watch the video below to help guide you through the process.
After installing your new battery, please know that a full charge can be achieved in 2-4 hours (depending on current battery life). To assure full functionality, we suggest staying close to your gimbal during the charging process so that it does not overcharge. Overnight and/or unsupervised charging is not advised.
If you own a CAME-Single and suspect that the original built-in battery may be giving you problems (power problems, overheating), you can notify our support department and they can assist you with the matter.
NOTE: If your CAME-Single's handle internal battery configuration contains an extra protective circuit board and differs from the one shown above, then please see this video for steps on how to replace. If you are unfamiliar with the soldering process that is required for this alternate installation process, we'd suggest bringing your Single & battery into a professional electronics/repair shop so they can do it for you.
Customers of our newer gimbals may have noticed that the battery charger kits for the CAME-Argo and Mini 3 are slightly different from how they used to be. With this slight change, there is an updated process on how to properly charge your batteries for these gimbals. See the video below for a simple step-by-step breakdown.
The blue LED indicator lights on the battery itself will not blink as it is charging. However, you can press the button to see the progress of the charge.
Premini, recently uploaded his first CAME-Mini 2 Gimbal test on Vimeo! No post stabilization was added and he did a quick color grade. He filmed the whole thing with a BMPCC + a Kern Paillard Switar 10mm lens.
The CAME-Mini 2 is a tool-less 3-axis gimbal that is built to work with lightweight cameras. All of the wiring is enclosed in the frame itself, making sure that the wiring doesn't get damaged while it's being used. The Mini 2 is completely powered by four 18650 rechargeable batteries that you insert into the gimbals horizontal cross bar.