BBW Production, shot this short video of the "Speedtest Glassdrive Racing" Event entirely on the CAME-7800 Gimbal!
With a max payload of roughly 6.6 pounds, the CAME-7800 Gimbal is designed for cameras like the 5Dmk3, GH4 or the Sony A7s.
Click below for more information on the CAME-7800 3-Axis Gimbal.
One of the more useful functions of any CAME-TV gimbal is the built-in joystick/remote control feature. Simply enough, the 2-axis joystick essentially allows you to do seemless panning and tilting movements while maintaining smooth and steady shots with the gimbal.
However, all gimbals come with a pre-programmed joystick speed that dictates how fast its movements are. And sometimes this default speed isn't ideal for the shot that you may want to execute. But luckily, speed can easily be adjusted using the SimpleBGC software. Full step-by-step details are shown in the video below.
Service Modes are used to assign button clicks to various gimbal operations. On most CAME-TV gimbals, you can toggle between these different modes simply by clicking on the service button (or joystick) to operate them. By default, the first three modes are set as follows:
1 Click: Switch to Profile 1
2 Clicks: Switch to Profile 2
3 Clicks: Switch to Profile 3
To see how Profiles 1, 2, and 3 are configured, click here.
It's also a good idea to take advantage of your Service Modes by using the Profile 4 and Profile 5 options. These profiles should specifically be set to calibrate your sensors and gyro, respectively. These modes will especially come in handy when you're shooting out in the field and don't have access to your laptop to recalibrate your gimbal.
4 Clicks: Calibrate ACC (Calibrate sensors. Must hold camera and gimbal level and square when using this option)
5 Clicks: Calibrate Gyro (Calibrate Gyros. Must hold camera and gimbal level and square when using this option)
Download the SimpleBGC software here.
SAMPLE: Once you have Profiles 4 & 5 programmed and saved, you can now calibrate your sensors and gyros directly through the gimbal. (Demonstrated in video below with a CAME-Single, but the process applies to all CAME-TV gimbals when calibration modes have been programmed in them.)
Gimbal calibration demonstrated on CAME-Single and CAME-7800 gimbals below. (Process applies to all gimbals with service modes programmed in).
You4reel, shot this huge Corona sponsored event in Ireland with the CAME-TV 7800 Gimbal! The CAME-7800 is a 3-axis gimbal designed for cameras like the Canon 5Dmk3, Canon 5Dmk2, Canon 7D and even the Panasonic GH-4.
Click below for more information on the CAME-TV 7800 3-Axis Gimbal.
Vimeo user, North South Films, used the CAME-TV 7800 Gimbal to shoot this short engagement video.
The CAME-7800 features a clean design that hides all of the wires to ensure they don't get damaged while it's being used. The 7800 Gimbal, also gives the shooter multiple operation modes that can easily be switched by pressing the joystick.
(Monitor is optional)
Click below for more information on the CAME-TV 7800 3-Axis Gimbal.
Vimeo user, No Routes Found, posted this quick review of the CAME-7800 Gimbal while he was on location shooting a documentary. Check it out below!
Click below for more information on the CAME-TV 7800 3-Axis Gimbal.
Recently, Vimeo user, Kluzo, used the CAME-7800 gimbal to cover an event in Paris!
The CAME-7800 uses three motors that stabilize the camera along with the pan, tilt, and roll axis. The motors will help compensate for shakes, vibrations, and other unwanted movements, allowing you to get some smooth shots.
(Monitor Is Optional)
Click below for more information on the CAME-7800 3-Axis Gimbal.
Currently the only gimbal that has the motor encoders is the CAME-Single. We may start to implement these encoders onto newer versions of our gimbals in the future.
Check out this 3 minute video of some CAME-7800 gimbal test footage by Kyle SHOX Brown FILMS! The CAME-7800 is designed for cameras like the Canon 5Dmk3, Panasonic GH4, and Sony A7. The max weight the CAME-7800 can handle is about 6.5 lbs, so it's perfect for your DSLR type cameras.
Click below for more information on the CAME-7800 3-Axis Gimbal.
Music video shoot with the#cametv #7800 #gimbal! Posted by@joelindenmann
For more information on the CAME 7800 Gimbal click the picture below!
Check out @joelindenmann showing off his#cametv #7800 #gimbal!
For more information on the CAME 7800 Gimbal click below!
@taylor2d2 getting those smooth shots with the #cametv #gimbal!
For more information on the CAME 7800 Gimbal click below!
