Tag Archives: came tv mini2

•

Service Modes are used to assign button clicks to various gimbal operations. On most CAME-TV gimbals, you can toggle between these different modes simply by clicking on the service button (or joystick) to operate them. By default, the first three modes are set as follows:

1 Click: Switch to Profile 1
2 Clicks: Switch to Profile 2
3 Clicks: Switch to Profile 3

To see how Profiles 1, 2, and 3 are configured, click here.

It's also a good idea to take advantage of your Service Modes by using the Profile 4 and Profile 5 options. These profiles should specifically be set to calibrate your sensors and gyro, respectively. These modes will especially come in handy when you're shooting out in the field and don't have access to your laptop to recalibrate your gimbal.

4 Clicks: Calibrate ACC (Calibrate sensors. Must hold camera and gimbal level and square when using this option)
5 Clicks: Calibrate Gyro (Calibrate Gyros. Must hold camera and gimbal level and square when using this option)

Download the SimpleBGC software here.

SAMPLE: Once you have Profiles 4 & 5 programmed and saved, you can now calibrate your sensors and gyros directly through the gimbal. (Demonstrated in video below with a CAME-Single, but the process applies to all CAME-TV gimbals when calibration modes have been programmed in them.)

Gimbal calibration demonstrated on CAME-Single and CAME-7800 gimbals below. (Process applies to all gimbals with service modes programmed in).

Related Posts:

•

This video by MrCheesycam should only be used as a reference for restoring your the default configuration found on the CAME-TV CAME-MINI2 Gimbal using firmware 2.43 b9.

While you can use the video as reference to copy the settings exactly, there are a few areas in which you DO NOT want to change on your system. This video will explain which options you should copy, and which settings you should NOT COPY.

Primarily you do not want to change your default Invert settings under Motor Configuration. If you believe you need to make changes to your Invert options, you can view our FAQ Article About Gimbal Motor Invert Options.

Do not change your default RC Trim Settings according to the settings in the video above. If you believe you need to make changes to your RC Trim Settings, you can view our FAQ Article about Gimbal RC Settings.

For additional information about the CAME-MINI2 Gimbal, We suggest visiting our blog article regarding How To Use Service Modes and Profiles with the CAME-MINI2 Gimbal by MrCheesycam found here.

Related Posts: