We must first note that all CAME-TV gimbals are pre-programmed and quality-tested to function right out of the box. No additional software tuning or firmware upgrades should be necessary. However, if you would like to make minor tuning adjustments with the SimpleBGC software at your own accord- such as changing joystick speeds, decreasing motor power, etc. - we suggest that you first SAVE the gimbal's default, factory-programmed settings before making such changes.
Should something go wrong as you're making the changes, you can always revert back and load the original default profiles. And please note that the profiles that you save contain settings that are unique to your gimbal. Sharing these profiles with other gimbal owners is not advised and can make their gimbal inoperable.
And perhaps most importantly, under no circumstances do we advise upgrading your firmware. Doing so will wipe your settings and make your gimbal inoperable. The only way to potentially make it functional again would be to send it back to a CAME-TV support facility for repair (at your own cost if out of warranty).
[IMPORTANT NOTE:] Your saved Default Profile is configured to the default Firmware installed on your Gimbal. If you attempt to upgrade your firmware, the saved Default Profile will no longer be valid.
MrCheesyCam, uploaded this detailed video that goes through the main differences between the new CAME-Optimus and CAME-Single.
The CAME-Optimus is the successor to our very popular CAME-Single 3-axis gimbal. All motors on the Optimus can rotate a full 360 degrees without limitation for greater range and flexibility during operation. The CAME-Optimus has a brand new frame design that allows the gimbal to be operated completely inverted or underslung.
For more information on the CAME-TV Optimus gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.
@mrcheesycam posted this video of his #cametv #optimus #gimbal setup that he's going to use for an upcoming shoot! #CameOptimus#OptimusGimbal #CameGimbal #PanasonicGH4 #Panasonic #GH4 #3axis#3axisGimbal via Instagram
OPTIMUS IS NOW IN STOCK AND SHIPPING
FEATURED OPTIMUS VIDEO
YOU MIGHT BE INTERESTED IN THESE OTHER GIMBALS
 |
 |
 |
| CAME-ACTION Tool-less | CAME-ACTION 2 Tool-less |
CAME-ARGOTool-less |
| The design of the CAME-Action allows for one handed smooth operation... | 32 Bit Boards with brushless motors and Encoders designed for iPhone and similar sized phones... | The CAME-ARGO is completely tool-less which allows the operator to change camera setups.... |
 |
|
|
Red Carpet Vlog, uploaded this unboxing/test video on our new CAME-Optimus gimbal! The Sony A7sII was used in conjunction with the Optimus gimbal for the test portion of the video.
The CAME-Optimus is the successor to our very popular CAME-Single 3-axis gimbal. The Optimus model also features encoders and allows for one hand operation, but with all of the controls and battery now relocated outside of the handle, the hand grip for the Optimus can be changed to Dual Handles, depending on the camera operator's requirement. All the motors rotate a full 360 degrees without limitation for greater range and flexibility during operation.
For more information on the CAME-TV Optimus gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.
Youtube user, Tony A. uploaded this test video he shot with the CAME-TV Optimus gimbal paired with the Sony a6300 camera! The lens he used was the Sony 10-18mm.
The Optimus model features encoders and allows for one hand operation, but with the controls and battery now relocated outside of the handle, the single handle can be changed to dual handles. All motors on the Optimus can rotate a full 360 degrees without limitation for greater range and flexibility during operation.
For more information on the CAME-TV Optimus gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.
Youtube user, Brandon Rice uploaded this quick review on the new CAME-Optimus gimbal! The video goes through his first impressions and he even adds a little bit of sample footage at the end. The camera he used in the video was the Panasonic GH4.
The CAME-Optimus is the successor to our very successful CAME-Single gimbal. The new frame design allows the Optimus gimbal to be operated completely inverted or underslung. All motors rotate a full 360 degrees without limitation for greater range and flexibility during operation. The single handle can be changed to Dual Handles depending on the camera operator's requirement.
For more information on the CAME-TV Optimus gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.
