Tom Antos, recently posted this detailed review on our CAME-TV Mini 3 gimbal! The video goes over the main specs and he also adds some great footage of him using it.
Unlike the Mini 1 and Mini 2, the new Mini 3 uses basecam 32-bit controllers with encoders. The new smart battery is quick and easy to install and provides up to 10 hours of runtime(depending on your setup). The top handle on the Mini 3 can be removed, each side handle can also be removed, and the entire top cross bar can be separated from the lower frame allowing for compact transport.
For more information on the CAME-TV Mini 3 gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.
MrCheesycam, uploaded this short overview video that goes over the recent changes to the batteries for our CAME-ARGO and Mini-3 Gimbals!
The CAME-Mini 3 has all the wiring and electronics completely enclosed into the frame, offering a clean professional appearance and protecting the wiring. For easy transportation & storage the side handles on the Mini-3 are completely removable.
The CAME-ARGO has encoders on all of the motors, which makes the ARGO's performance more smooth and accurate - along with increasing the lifespan of the battery. The entire top handle bar can be easily separated from the gimbal which than can be mounted to other devices like a crane, slider or drone with the included adapter plate.
For more information on the CAME- Mini 3 & the CAME-ARGO gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.
We were luck enough to have the Gear Addix crew pass by our booth and film a little interview on some of the CAME-TV Gimbals that we showcased at the 2016 Cine Gear Expo!
The size of the CAME-Single is perfect for mirror-less cameras such as the Panasonic GH4, Sony A7s | A7RII, and BlackMagic Pocket Cinema Cameras. The encoders on the CAME-Single prevent motors from losing synchronization, provides important information about frame and camera angles, decreases power consumption (longer battery life), increases Torque and precision of stabilization.
The Optimus model also features encoders and allows for one hand operation, but with all of the controls and battery now relocated outside of the handle, the single handle can be changed to Dual Handles depending on the camera operator's requirement. All motors rotate a full 360 degrees without limitation for greater range and flexibility during operation.
The CAME-Mini 3 is our latest edition to the CAME-MINI Gimbal Series. The new Mini 3 uses basecam 32 bit controllers with encoders. All of the wiring and electronics are completely enclosed into the frame, offering a clean professional appearance and protecting the wiring.
For more information on our entire CAME-TV Gimbal line click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.
Youtube user, Mr Mikey Davies, uploaded this quick test video of our new CAME-Mini 3 3-axis gimbal! The video was shot with his Sony A7s camera.
The CAME-Mini 3 is our latest edition to the CAME-MINI Gimbal Series. The new Mini 3 uses basecam 32 bit controllers with encoders. All of the wiring and electronics are completely enclosed into the frame, offering a clean professional appearance and protecting the wiring. The top handle on the Mini 3 can be removed, each side handle can also be removed, and the entire top cross bar can be separated from the lower frame allowing for compact transport.
For more information on the CAME-TV Mini 3 gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.
MrCheesycam, recently uploaded this quick overview video of the brand new CAME-Mini 3 gimbal! The camera he has balanced on his Mini 3 in the video is the Panasonic GH4 with a Lumix 12-35mm lens.
The brand new CAME-TV Mini 3 is the latest edition in our CAME-Mini gimbal series. Unlike the Mini 1 and Mini 2, the new Mini 3 uses basecam 32-bit controllers with encoders. Having encoders on the Mini 3 gives the gimbal more stabilization, increases the torque and decreases the power consumption for longer battery life. The new smart battery is quick and easy to install and provides up to 10 hours of runtime(depending on your setup).
For more information on the new CAME-TV Mini 3 Gimbal click below! Make sure to also sign up for the newsletter to receive updates and information on any new products we release.
