Vimeo user, Milton: Motion & Design, posted this video of his first test run right after opening his CAME-Single gimbal!
Click the picture below for more information on the CAME-Single gimbal.
Tag Archives: cametv
The SimpleBGC software does not see the connected gimbal.
If you have connected your gimbal via USB, you may need to install the proper driver for your Mac or PC to communicate with the control board which can be found Here>>.
Once you have installed the proper Mac or PC driver and restarted your computer, connect the gimbal, go into the SimpleBGC software, and on the upper left, select the proper USB port, and hit 'Connect'.
If you still do not see the gimbal or if you already have the proper drivers for your computer, please check your USB cable to make sure it is a Data cable. We suggest either testing the cable or just change the cable entirely to make sure it is not an issue.
Make sure the cable is fully connected to the gimbal and your computer, then restart the SimpleSBC program.
What are Brushless Motor Encoders?
Encoders are often used in Robotics for highly accurate monitoring of motor position. Some of the benefits of using Encoders are to: prevent motors from losing synchronization and skipping steps, provides important information about frame and camera angles, decreases power consumption (longer battery life), increases Torque, increases precision of stabilization, and more.
Currently our only gimbal with motor encoders is our CAME-Single.
Does the CAME-MINI or any other CAME-Gimbal have the motor encoders?
Currently the only gimbal that has the motor encoders is the CAME-Single. We may start to implement these encoders onto newer versions of our gimbals in the future.
Can the CAME-Single work in inverted mode?
The CAME-Single is not able to work in inverted mode because the frame will not rotate properly to support inverted mode.
CAME-Mini 2 Gimbal Test By Voyager Video
Voyager Video, posted this quick test of the CAME-Mini 2 gimbal! It was shot with the Sony A7S and a Zeiss 24-70mm lens.
The new CAME-MINI 2 Gimbal is completely tool-less, which allows the operator to quickly change camera setups and re-balance the entire system for optimal performance. All of the wiring and electronics are enclosed into the frame offering a clean professional appearance and also protecting all the wiring.
Click the picture below for more information on the CAME-Mini 2 Gimbal.
CAME-Mini 2 Spot Light
| 3 Axis Gimbal | Joystick |
| For camera systems such as the Panasonic GH4, Blackmagic Pocket Cinema Camera and Sony A7. | A thumb controller joystick next to the right handle allows Pan and Tilt control. |
| Completely Enclosed | Handles |
| All of the wiring and electronics are completely enclosed into the frame. |
Two side handles for hand-held use and a top handle for low-angle shots or for transporting. |
FULL 3 AXIS STABILIZATION USING THE LATEST 32BIT CONTROLLERS WITH DUAL IMU SENSORS
YOU MIGHT BE INTERESTED IN THESE OTHER GIMBALS
 |
 |
 |
| CAME-Single With Encoders |
CAME-8000 Tool-less |
CAME-7800 Tool-less |
| One of the first commercially available 3 Axis 32 bit Basecam controlled gimbals to offer motors with Encoders .... | A handheld stabilizer designed for camera systems weighing up to 11 pounds, making it suitable for... | Designed for camera systems such as Canon 5D3, Canon 5D2, Canon 7D, Panasonic GH4, and Sony A7... |
 |
|
|
Will the CAME-TV 7800 Gimbal Work with my BlackMagic 4K Production Camera?
The size and weight of the Blackmagic Design 4K Production Camera will not work with the CAME-TV 7000 / 7500 / 7800 Gimbal Stabilizers. For cameras such as the BlackMagic 2.5K, 4K, and RED Epic we suggest using our CAME-TV 8000 Gimbal Stabilizer.
Wedding Video Shot Using The CAME-7500 Gimbal By Ken Lauguico
The CAME-7500 3-axis gimbal is designed to compensates for shakes, vibration or any unwanted jitter while shooting, allowing you to capture smoother shots that look like your camera is floating freely. The updated version of the CAME-7500, now includes new quick-release knobs that make it easier to adjust on the roll and yaw axis.
Click the picture below for more information on the CAME-TV 7500 Gimbal.
CAME-Mini 2 Gimbal Settings By Mr.Cheesycam
Mr.Cheesycam, uploaded this detailed video on how different profiles and settings can affect your CAME Mini 2 gimbal.
The video also has a nice split screen edit that clearly shows what he's doing in the program, so you can follow along with ease.
Click the picture below for more information on the CAME Mini 2 gimbal.
CAME-7500 New Lower Price
| 3 Axis Gimbal | Alexmos Board |
| For camera systems such as Canon 5D3, Canon 5D2, Canon 7D, Panasonic GH4, and Sony A7. | 32-bit controller used for the construction of high quality 3-axis camera stabilizing systems. |
| Smooth Shots | Handles |
| 3 motors that stabilize along the pan, tilt, and roll axes. | Two side handles for hand-held use and a top handle for low-angle shots or for transporting. |
SUPPORTS LOADS UP TO 6.5 LBS AND INCLUDES
PRE-CALIBRATED 32-BIT ALEXMOS CONTROL BOARD
YOU MIGHT BE INTERESTED IN THESE OTHER GIMBALS
|
|
|
| CAME-Single With Encoders |
CAME-8000 Tool-less |
CAME-7800 Tool-less |
| One of the first commercially available 3 Axis 32 bit Basecam controlled gimbals to offer motors with Encoders .... | A handheld stabilizer designed for camera systems weighing up to 11 pounds, making it suitable for... | Designed for camera systems such as Canon 5D3, Canon 5D2, Canon 7D, Panasonic GH4, and Sony A7... |
|
|
|
CAME-Single Updated Test Footage By SWAF Jarrad
Youtube user, SWAF Jarrad, posted some quick test footage from his CAME-Single 3-Axis gimbal. In the video, he does mention that he had some trouble in the beginning, but once he changed the lens on his camera, everything was a lot smoother. His setup in the video was a Panasonic GH-4 with a Panasonic 14-140mm lens. Check out his footage below!
Click the picture below for more information on the CAME-Single Gimbal.
CAME-Single Gimbal Test By AeroVideo
Here's a quick test of the CAME-Single that AeroVideo shot with his Sony A7S camera plus a Sony 28-70mm lens.
The new CAME-SINGLE is one of the first commercially available 3-Axis 32-bit basecam controlled gimbals that offer brushless motors with Encoders.The design of the CAME-SINGLE allows the shooter to operate the gimbal with just one hand and has a 1/4-20 and 3/8 threaded mounting point located under the handle.
Click the picture below for more information on the CAME-Single
New CAME-Single
| Encoders | Tool-less |
| This technology prevent motors from losing synchronization, skipping steps and more. | 32-bit controller used for the construction of high quality 3-axis camera stabilizing systems. |
| Design | Battery Life |
| The design of the CAME-SINGLE allows for one hand operation. | Batteries can operate up 10 hours when fully charged. |
ENCODERS ARE OFTEN USED IN ROBOTICS FOR HIGHLY ACCURATE MONITORING OF MOTOR POSITION
YOU MIGHT BE INTERESTED IN THESE OTHER GIMBALS
 |
|
|
| CAME-MINI 2 Tool-less |
CAME-8000 Tool-less |
CAME-7800 Tool-less |
| The new MINI2 is completely tool-less which allows the operator to change camera setups.... | A handheld stabilizer designed for camera systems weighing up to 11 pounds, making it suitable for... | Designed for camera systems such as Canon 5D3, Canon 5D2, Canon 7D, Panasonic GH4, and Sony A7... |
|
|
|
Testing The CAME-Single With A Sony A7s By NextWaveDV
NextWaveDV, put together this quick video of them testing out the new CAME-Single 3-Axis Gimbal with a Sony A7s!
The CAME-Single is equipped with brushless motors that have encoders. The encoders prevent motors from losing synchronization, skipping steps, decreases power consumption, increases Torque, increases the precision of the stabilization and provides important information about frame and camera angles.
Click the picture below for more information on the CAME-Single 3-Axis Gimbal.
