Tag Archives: came-single

We must first note that all CAME-TV gimbals are pre-programmed and quality-tested to function right out of the box. No additional software tuning or firmware upgrades should be necessary. However, if you would like to make minor tuning adjustments with the SimpleBGC software at your own accord- such as changing joystick speeds, decreasing motor power, etc. - we suggest that you first SAVE the gimbal's default, factory-programmed settings before making such changes.

Should something go wrong as you're making the changes, you can always revert back and load the original default profiles. And please note that the profiles that you save contain settings that are unique to your gimbal. Sharing these profiles with other gimbal owners is not advised and can make their gimbal inoperable.

And perhaps most importantly, under no circumstances do we advise upgrading your firmware. Doing so will wipe your settings and make your gimbal inoperable. The only way to potentially make it functional again would be to send it back to a CAME-TV support facility for repair (at your own cost if out of warranty).

[IMPORTANT NOTE:] Your saved Default Profile is configured to the default Firmware installed on your Gimbal. If you attempt to upgrade your firmware, the saved Default Profile will no longer be valid.

Vimeo user, Adam Lim recently posted his second test video on how the Sony a6300 performs with the CAME-Single gimbal! The lens he used was the Sony E PZ 18-105mm f/4 G OSS Lens.
The CAME-Single offers full 3-axis stabilization with a built-in joystick and brushless motors with encoders. When purchasing the Single gimbal, you now get the dual gimbal handles. The dual gimbal handles give the gimbal operator smooth camera pan and tilt motions. If you haven't seen the Adam Lim's first test, check it out below!
For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV Single 3-Axis Gimbal

@andhervisuals filming a wedding on location in #Canada with the #cametv #single #gimbal & #Sony #A7sii! #CameSingle #SingleGimbal #SonyA7sii #3axisGimbal - Loved working with the talented @michaelanthonyphotography for @hannahmariephotographer and Stefan's day-after session. Our bride, Hannah is also a wedding photographer. Too much talent in one pic 😆
.
.
Gimbal by @cametv #Regrann via Instagram https://www.instagram.com/p/BI3U-rZBVH8/

@themashupking on set filming a #documentary with the #cametv #single #gimbal and #Sony #A7sii! #CameSingle #SonyA7sii #SingleGimbal #3axis #CameGimbal - On set of @ElPanteraMovie
📷 @hookclok #documentary #filmmaking #indiefilm #elpantera #a7sii #rodemic #cametv #Regrann via Instagram https://www.instagram.com/p/BItcjMLBVD2/

@flolinemedia filming at #LakeMichigan with his #cametv #single #gimbal & #Panasonic #GH4! #singlesnap1 #Camegimbalsnap5 #CameGimbal #CameSingle #PanasonicGH4 #SingleGimbal - Gettin the goods out here today, #SailBoat #LakeMichigan #LittleBayDeNoc #CameTVSingle #SeaDoo #gh4 #4k #vlog @cametv #Regrann via Instagram https://www.instagram.com/p/BIqKK12hiLC/

Youtube user, Jeff Estanislao posted this wonderfully shot wedding highlight video that was filmed with the CAME-Single paired with the Sony A7s & Sony 10-18mm lens.

The CAME-Single works as a great portable 3-axis gimbal that can easily be balanced and carried around. With the Single now including the new Dual Gimbal Handles, it provides the gimbal operators with smooth camera panning and tilt motions. The CAME-Single has an internal battery that will allow it to operate for up to 20 hours.

CAME-TV Single 3-Axis gimbal

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV Single 3-Axis gimbal

Crew pic from a recent shoot that @feedbackloopproductions filmed with the #cametv #single #gimbal and #Sony #A7s! #singlesnap1 #CameSingle #CameGimbal #SingleGimbal #SonyA7s #OnSet- Crew on location filming our 90's throwback horror wedding.
Much ❤️ to all for killing it yesterday!!
.
.
.
#redwedding #90s #horror #shortfilm #film #filmmaking #production #vhs #Regrann via Instagram https://www.instagram.com/p/BId8YnBByC2/

@nobachcreative filming with our #cametv #single #gimbal paired with the #Sony #a6300! #singlesnap1 #Camegimbalsnap5 #CameGimbal #CameSingle #SingleGimbal #Sonya6300 #BlackAndWhite - Before our last wedding the bride had a some time to visit her grandfather in the hospital. We rode along and documented the experience with photo & video!#touchingmoment #lovewhatyoudo #michiganphotographer #cametv #cametvsingle #sonya6300 #michigancinematographer #michigancinematography #Regrann via Instagram https://www.instagram.com/p/BIa7-5OBt9L/

Youtube user, Dreamshock Design recently filmed a video for the performance & luxury car company "Premier GT". After the video was published, Dreamshock Design shared this awesome BTS video that shows footage of them filming with the CAME-TV Single gimbal paired with the Sony A7rII!

The encoders on the CAME-Single: prevent the motors from losing sync/skipping steps, provides important information about the frame and also decreases the power consumption - increasing the battery life. The Single is extremely easy to balance with it's tool-less design and portable body, making it convenient to take with you on shoots. The CAME-Single has an internal battery that will allow it to operate for up to 20 hours. Make sure you check out the finished video for "Premier GT" below!

For more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV Single 3-Axis Gimbal

@macmotions filming interviews at #sdcc2016 with his #cametv #single #gimbal & #Sony #a7sii! #Camesingle #singlesnap1 #Camegimbalsnap5 #SanDiego #ComicCon #CameGimbal #Sonya7sii - Wrapping up another seriously crazy day at comic con. Security getting up in my face at one point earlier but here is a pic of the good moments. #comiccon2016 #sdcc #a7sii #cametv #Regrann via Instagram https://www.instagram.com/p/BIWau2tBMGO/

Sweet #cametv #single #gimbal setup by @tolufilms! #Panasonic #GH4 #CameSingle #singlesnap1 #Camegimbalsnap5 #CameGimbal #PanasonicGh4 #SingleGimbal #3axis - Tools of the trade #gh4 #cametvsingle #tolufilms #cinematography #filmmaking #filmcamera #gimbal #panasoniclumix #socal #indiefilm #cametv #Regrann via Instagram https://www.instagram.com/p/BITllmchqu4/

@nicpachunka's #cametv #single #gimbal setup he used on a recent shoot! #Sony #a6300 #Sonya6300 #CameSingle #CameGimbal #singlesnap1 #Camegimbalsnap5 #3axis - Check out the rig from today's shoot! 🎥 #Regrann via Instagram https://www.instagram.com/p/BIGXxnZgn3t/

Jeff Estanislao, uploaded this highlight video that covers the "Underhill Art Exhibition" in Sydney, Australia. It was filmed using the CAME-TV Single paired with the Sony A7s & Sony 10-18mm F4 lens!

The CAME-Single is a solid one-hand designed gimbal that is made for cameras like the Panasonic GH4, Sony A7Sii/A7Rii series cameras and the Blackmagic Pocket Cinema Camera. The whole gimbal(including parts) fit in a protective portable hard case. The encoders on the CAME-Single: prevent the motors from losing sync/skipping steps, provides important information about the frame and also decreases the power consumption - increasing the battery life.

CAME-TV Single 3-Axis GimbalFor more information on the CAME-Single gimbal click below! Make sure to also sign up for our newsletter to receive updates and information on any new products we release.

CAME-TV Single 3-Axis Gimbal

BTS pic of @feedbackloopproductions filming with his #cametv #single #gimbal & #Sony #A7s! #CameSingle #CameGimbal #singlesnap1 #SonyA7s - Filming makes us happy!!
#shortfilm #film #filmmaking #movie #sony #a7s #gimbal #atomos #Regrann via Instagram https://www.instagram.com/p/BIDab3ADFpy/

Sweet #cametv #single #gimbal setup with the #Sony #a7sii by @thomwilliams_! #Camegimbalsnap5
#CameSingle #singlesnap1 #Sonya7sii - Today's new toy. Because it's difficult to ride a bike and use a Ronin. #SonySquad #a7sii #CameTV #Regrann via Instagram https://www.instagram.com/p/BH5yMYbBA7q/