Click below for more information on the CAME-Single Gimbal.
The CAME-7800 features a clean design that hides all of the wires to ensure they don't get damaged while it's being used. The 7800 Gimbal, also gives the shooter multiple operation modes that can easily be switched by pressing the joystick.
Click below for more information on the CAME-TV 7800 3-Axis Gimbal.
|Low Profile||Sony battery plates|
|The weight saving slim design is great for portability.||Can be powered through industry standard Sony batteries (NP-F or V-Mount)|
|Diffusion Filter||Sturdy Yoke|
|Great for wrapping light around your talent.||Quick release handles allow for easy positioning of the LED panel.|
LIGHTWEIGHT, PORTABLE AND AFFORDABLE LIGHTING SOLUTION FOR ANY PHOTO, VIDEO, OR FILM PRODUCTION
YOU MIGHT BE INTERESTED IN THESE EXTRAS
Recently, Vimeo user, Kluzo, used the CAME-7800 gimbal to cover an event in Paris!
The CAME-7800 uses three motors that stabilize the camera along with the pan, tilt, and roll axis. The motors will help compensate for shakes, vibrations, and other unwanted movements, allowing you to get some smooth shots.
Click below for more information on the CAME-7800 3-Axis Gimbal.
In this quick video posted by Youtube user, Joe Taravella, he takes his new CAME-Single gimbal out for a test run! The footage looks great, especially when he walks up and down the stairs. He used his Sony A7S with a Sony 10-18mm F4 lens.The new CAME-Single is one of the first commercially available 3-Axis 32-bit basecam controlled gimbals that offer brushless motors with Encoders.
Click below for more information on the CAME-Single 3-Axis gimbal.
The CAME-Steadicam can hold camera setups that are roughly 5 to 33 pounds with a minimum height of 27.5 inches and a max of 40 inches. The CAME-Steadicam comes equipped with a baseplate that has a Power, AV and HDMI connector. You also have the option to buy the stabilizer and the vest separately or as a package.
Click below for more information on the CAME-Steadicam Pro.
Voyager Video, posted this quick test of the CAME-Mini 2 gimbal! It was shot with the Sony A7S and a Zeiss 24-70mm lens.
The new CAME-MINI 2 Gimbal is completely tool-less, which allows the operator to quickly change camera setups and re-balance the entire system for optimal performance. All of the wiring and electronics are enclosed into the frame offering a clean professional appearance and also protecting all the wiring.
Click the picture below for more information on the CAME-Mini 2 Gimbal.
|3 Axis Gimbal||Joystick|
|For camera systems such as the Panasonic GH4, Blackmagic Pocket Cinema Camera and Sony A7.||A thumb controller joystick next to the right handle allows Pan and Tilt control.|
|All of the wiring and electronics are
completely enclosed into the frame.
|Two side handles for hand-held use and a top handle for low-angle shots or for transporting.|
FULL 3 AXIS STABILIZATION USING THE LATEST 32BIT CONTROLLERS WITH DUAL IMU SENSORS
YOU MIGHT BE INTERESTED IN THESE OTHER GIMBALS
The CAME-7500 3-axis gimbal is designed to compensates for shakes, vibration or any unwanted jitter while shooting, allowing you to capture smoother shots that look like your camera is floating freely. The updated version of the CAME-7500, now includes new quick-release knobs that make it easier to adjust on the roll and yaw axis.
Click the picture below for more information on the CAME-TV 7500 Gimbal.
Mr.Cheesycam, uploaded this detailed video on how different profiles and settings can affect your CAME Mini 2 gimbal.
The video also has a nice split screen edit that clearly shows what he's doing in the program, so you can follow along with ease.
Click the picture below for more information on the CAME Mini 2 gimbal.