Recently, Satostudiogear, uploaded this quick and detailed review of the CAME-TV FS7 Cage! The CAME-TV FS7 Cage is designed specifically for the Sony FS7 camera, allowing you to mount multiple useful accessories to the cage itself that will help your shooting experience. The FS7 Cage has two rosette mounting points(one on each side), which gives ...continue reading
In order to get smooth, steady shots with any of our CAME-TV gimbals, you want to make sure that your camera is properly balanced on them. However, sometimes our customers are so eager to put their new gimbal to use, that they don't take the time balance it accurately. If you are reading this article, ...continue reading
RAI Amsterdam Conference 10-14 September : Exhibition 11-15 September IBC 2015 Every year, IBC brings the world’s electronic media and entertainment industry together to discuss, dissect and challenge the industry’s agenda. It provides a full and vibrant experience at all levels of the industry, embracing everyone from student to CEO, from start-up to media conglomerate, ...continue reading
BBW Production, shot this short video of the "Speedtest Glassdrive Racing" Event entirely on the CAME-7800 Gimbal! With a max payload of roughly 6.6 pounds, the CAME-7800 Gimbal is designed for cameras like the 5Dmk3, GH4 or the Sony A7s. Click below for more information on the CAME-7800 3-Axis Gimbal.
In this beautifully shot video, Scotty Ray, traveled to Yosemite National Park to hike up "Half-Dome". He brought along the CAME-Single Gimbal to document his trip and was able to piece together this video. "I used the CAME-Single over other gimbals because of its size and reliability. It does everything I need and fits inside ...continue reading
All CAME-TV gimbals have been designed to support numerous camera/lens setups. That is, as long as the overall payload does not exceed that particular gimbal's pre-determined weight capacity. However, it is also possible for a camera setup to be too light. When this happens, users may notice shaking, vibrating, and even noises coming from the ...continue reading
FocusPulling (.com), uploaded this video about getting some extra battery power for your camera. He goes through a bunch of gear that you might need and if you skip to around the 07:32 mark in the video, he goes over the specs of the CAME-TV VM02 V-Mount Plate. The CAME-TV VM02 V-Mount Plate offers 12V, 7.2V and ...continue reading
Sony a7RII Support Systems With the new release of the Sony A7RII camera we have designed a cage that fits the Sony A7RII perfectly. With the A7RII in the cage, you have complete access to the battery so you can easily swap it out without having to take the camera out of the cage. Depending ...continue reading
Laurent Briere, used the CAME-Single gimbal to film this quick tour video of the Bourges Cathedral in France! Click below for more information on the CAME-Single Gimbal.
One of the more useful functions of any CAME-TV gimbal is the built-in joystick/remote control feature. Simply enough, the 2-axis joystick essentially allows you to do seemless panning and tilting movements while maintaining smooth and steady shots with the gimbal. However, all gimbals come with a pre-programmed joystick speed that dictates how fast its movements ...continue reading
Youtube user, Canal Nômade, posted his first test run with the CAME-Mini 2 Gimbal! Click below for more information on the new CAME-Mini 2 3-Axis Gimbal.
Perhaps one of the more common questions we get from customers is "why is my gimbal drifting when it's powered on?." Obviously, a properly balanced and calibrated gimbal will stay put and only move when (and how) you want it to move. A likely reason for the drifting is that the RC Sub-Trim settings may ...continue reading
When you purchase a CAME-TV gimbal, chances are that it has been pre-programmed with 3 main profiles. And each profile contains its own unique set of follow modes, which you can toggle between depending on which mode you need to use. Profile 1 will enable Follow Modes for both Pan and Tilt (Yaw and Pitch). ...continue reading
Service Modes are used to assign button clicks to various gimbal operations. On most CAME-TV gimbals, you can toggle between these different modes simply by clicking on the service button (or joystick) to operate them. By default, the first three modes are set as follows: 1 Click: Switch to Profile 1 2 Clicks: Switch to ...continue reading
You4reel, shot this huge Corona sponsored event in Ireland with the CAME-TV 7800 Gimbal! The CAME-7800 is a 3-axis gimbal designed for cameras like the Canon 5Dmk3, Canon 5Dmk2, Canon 7D and even the Panasonic GH-4. Click below for more information on the CAME-TV 7800 3-Axis Gimbal.
