MrCheesycam, uploaded this short overview video that goes over the recent changes to the batteries for our CAME-ARGO and Mini-3 Gimbals!
The CAME-Mini 3 has all the wiring and electronics completely enclosed into the frame, offering a clean professional appearance and protecting the wiring. For easy transportation & storage the side handles on the Mini-3 are completely removable.
The CAME-ARGO has encoders on all of the motors, which makes the ARGO's performance more smooth and accurate - along with increasing the lifespan of the battery. The entire top handle bar can be easily separated from the gimbal which than can be mounted to other devices like a crane, slider or drone with the included adapter plate.
New owners of the CAME-Optimus who may have previously been familiar with it's top selling one-handed predecessor the CAME-Single may have noticed a small difference in how to power up their new device. With the Single, you would turn it on by holding down on the power button on the handle until it boots up. However, owners of the Optimus will come to learn that this is not the case with their new gimbal. To power up the Optimus, you simply need to do a 2-press sequence on the button that is found on the battery itself. Simply give it quick tap, and follow it up with a 2-3 second press & hold sequence until the gimbal turns on.
You can see both procedures performed below.
Youtube user, GlainKanVision posted this quick test video of him testing out his CAME-Single gimbal paired with the Sony a6300 camera!
The CAME-Single is a 3-axis 32-bit gimbal that is designed to be used with just one hand. The Single comes with encoders built into the motors, which prevents the motors from losing sync, skipping steps and it decreases power consumption - giving the gimbal a longer battery life. The Dual Gimbal Handles provide gimbal operators smooth camera panning and tilt motions.
The CAME-Prodigy gimbal is our largest 3-axis gimbal in our gimbal family. The Prodigy is designed to hold large camera setups and its replacing our old CAME-8000 gimbal. The gimbal is running the latest 32-bit Controller with Encoder Technology for enhanced stability and battery efficiency. The maximum payload the Prodigy can handle is roughly 11 lbs./4.9 kg, making it perfect for the BMCC, CANON C100/C300, RED EPIC, CANON 5D Series/7D Series, etc.
Vimeo user, 6ème Droite uploaded this beautifully shot real estate video that was filmed with the CAME-Single & Sony a6300!
The CAME-Single offers full 3-axis stabilization with a built-in joystick and brushless motors with encoders. With the Single now including the new Dual Gimbal Handles, it provides the gimbal operators with smooth camera panning and tilt motions. The CAME-Single has an internal battery that will allow it to operate for up to 20 hours.
#pentax645z @rodemic video micro #Regrann via Instagram https://www.instagram.com/p/BJjGCxTBk9I/
The Optimus model features encoders and allows for one hand operation, but with the controls and battery now relocated outside of the handle, the single handle can be changed to dual handles. Another exciting feature is that all the motors on the Optimus can rotate a full 360 degrees without limitation for greater range and flexibility during operation.
LIGHT WEIGHT, COMPACT LITHIUM-ION BATTERY PACKS
YOU MIGHT BE INTERESTED IN THESE PRODUCTS
FROM OUR USA WAREHOUSE